Résumé du contenu de la page N° 1
Operating Instructions
System Controller
Model No. WV-CU650
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Résumé du contenu de la page N° 2
ENGLISH VERSION Caution: Before attempting to connect or operate this product, please read the label on the bottom. For U.S.A CAUTION NOTE: This equipment has been tested and found to com- RISK OF ELECTRIC SHOCK ply with the limits for a Class A digital device, pursuant to DO NOT OPEN Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarize
Résumé du contenu de la page N° 4
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..............................3 CAMERA CONTROL .........................................................40 PREFACE ............................................................................5 ■ Camera Panning/Tilting Control ................................40 FEATURES ..........................................................................5 ■ Zooming Control ........................................................40 PRECAUTIONS ..........................
Résumé du contenu de la page N° 5
PREFACE This product, System Controller WV-CU650, is designed for setup and operation of cameras and other system units installed in a surveillance system. FEATURES • This product can control cameras, matrix switchers, and recording devices such as digital disk recorders. • One WV-CU650 System Controller can control two or more PS·Data system devices. In addition, up to 4 system controllers can be connected for multiple operation. The system controller has improved func- tions such as camera con
Résumé du contenu de la page N° 6
PRECAUTIONS • Refer all work related to the installation of this • Do not expose the appliance to water or moisture. appliance to qualified service personnel or system Do not try to operate it in wet areas. installers. Take immediate action if the appliance gets wet. Turn the power off and refer servicing to qualified service • Do not block the ventilation opening or slots on the personnel. Moisture can damage the appliance and cover. also cause electric shocks. To prevent the appliance from ove
Résumé du contenu de la page N° 7
DOCUMENT CONVENTION This document uses the following convention when describing the use and operation of this unit. System controller: Panasonic System Controller WV-CU650 Caution(s): Caution statements identify conditions or practices that could result in damage to this product or injury. Note(s): Note statements identify special instruction, rule, or side comment related to the topic. NOTIFICATION ABOUT SYSTEM UNITS Matrix Switcher WJ-SX150 Series Ver. 2.03 or later supports this system contr
Résumé du contenu de la page N° 8
HISTORY PRESET RECORDER CAM PGM POSI UNIT PRESET 1 2 3 4 5 6 7 8 9 CAM MON 0 (SET) (ESC) MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■ Main Unit ● Front View $4 #9 $0#8 $1 $2 $33 rt q w e WV-CU650 i u!0 y @9 ADJUST MENU F1 F2 F3 F4 EXIT ENTER #0 SYSTEM CONTROLLER #1 SHIFT CLEAR ALM #2 OPERATE ALARM SUSPEND !1 #4 STOP PLAY/PAUSE REC REC STOP !3 #3 !4 !7 SHUTTLE HOLD #5 !6 !5 REV FWD !8 #6 @0 — + #7 !9 @3 @2 @1 !2 o @4 @5 @7 @8 @6 @ @88 Note: Although printed on the template, some button func- t
Résumé du contenu de la page N° 9
o Camera function/System function button @0 Auxiliary 1 ON/OFF button (AUX 1 ON/OFF) (CAM FUNC/SYS FUNC) • Turns on an auxiliary device (AUX 1). • Recalls a function of camera by the function number. • When you press while holding down the SHIFT button, • When you press while holding down the SHIFT button, this button turns off the auxiliary device (AUX 1). this button recalls a function of external system unit by the function number. @1 Search/Time and date search button (SEARCH/ T&D SEARCH) !0
Résumé du contenu de la page N° 10
@8 Shuttle hold button (SHUTTLE HOLD) #8 LCD (Liquid Crystal Display) • If you press this button while rotating the shuttle ring, Displays the numbers of unit, monitor and camera cur- playback speed will be maintained even after removing rently selected. The LCD also displays the functions a hand from the shuttle ring. (The LED indicator on this assigned to F1 to F8 buttons. button blinks during the fast playback.) Note: This operation differs from “Hold playback #9 Adjustment button (ADJUST) sp
Résumé du contenu de la page N° 11
● Rear View MODE SERIAL CONTROLLER DC9V IN JOYSTICK DATA NO. $4 $5 $6 $7 $8 $9 $4 Joystick connector (JOYSTICK) $8 Controller Number switch (CONTROLLER NO.) This connector is used for connection with the joystick. When two or more system controllers are connected in the system, this switch determines the unit number of $5 Serial port (SERIAL) each controller. (Refer to p. 18 for the setting.) If con- This port is used for connection with a PC for system necting only one system controller in the
Résumé du contenu de la page N° 12
■ 3D Joystick Unit This joystick unit is used to operate combination cameras and pan/tilt heads manually. OPEN FAR IRIS FOCUS %2 %3 CLOSE NEAR A B %4 %1 %5 %0 %0 Top button %3 Focus control buttons (FOCUS NEAR, FAR) The top button is pressed to recall a function already These buttons adjust the lens focus of cameras assigned. equipped with specific lenses. %1 Zoom wheel controller %4 A and B buttons (A, B) This controller is used for zooming cameras equipped These buttons recall functions you a
Résumé du contenu de la page N° 13
■ LCD Display Descriptions The following are examples of LCD display after login. Note: Some parts of LCD displays, described on this document, may differ from the actual status. ● Default Status (LCD Display After Login) Mon02 Cam016 HD316 F1 F2 F3 F4 • When you press the RECORDER/UNIT button, the unit q Monitor number number of connected system unit appears. 1 to 99 can The number of connected monitor is displayed. 1 to 99 be displayed as a unit number. can be displayed as a monitor
Résumé du contenu de la page N° 14
● Main Menu (Menu Functions) LCD MENU CAM 101 Camera Setup q Category e Function name The category of selected menu function is displayed. The name of selected menu function is displayed. w Function number The function number of selected menu function is dis- played. Note: Refer to p. 48 Menu Function Categories. ● Sub Menu (Menu Functions) Camera Setup 101 On Off Rst A.Rst F1 F2 F3 F4 q Menu name e Button actions The name of selected menu function is displayed. The actions activated
Résumé du contenu de la page N° 15
Prohibited ● Messages Displayed on the LCD Invalid Mon02 Cam016 HD316 Prohibited Invalid • When you have tried an operation not authorized by the function level setting, camera level setting, or selected This message is displayed in the following circumstances. system unit, “Prohibited” blinks on the LCD. • When you have entered a wrong user ID or password, • When you have forgotten to select a system unit or etc. monitor before selecting a camera, “Prohibited” blinks •When you
Résumé du contenu de la page N° 16
4 4 4 4 3 3 3 3 2 2 2 2 1 1 1 1 0 INSTALLATIONS AND CONNECTIONS WARNING The installations described in the figures should be made by qualified service personnel or system installers. ■ Basic System Connections The following is an example in which a recorder and data multiplex units are connected. Camera 1 Camera 8 Camera 9 to Camera 12 Camera 13 to Camera 16 • • • • • • • • • 1 41 4 • • • • • • • • • • • • Data Multiplex Unit UNIT ALARM UNIT ALARM POWER 0 ALARM POWER 0 ALARM RESET SUSPEND SET UP
Résumé du contenu de la page N° 17
4 3 2 1 ■ Connection with the 3D Joystick Unit Connect the main unit and 3D joystick unit as follows. Bottom side Main unit 3D joystick unit Cable DOWN UP connector 0 SERIAL MODE CONTROLLER JOYSTICK DATA DC9V IN NO. Combination code label has been stuck on the bottom. Cable (supplied) Combination Fit the cable code label into the cable trench. Note: Use the main unit and 3D joystick unit whose combination codes are identical. ■ Adjustment of 3D Joystick To adjust the altitude of 3D joystick, t
Résumé du contenu de la page N° 18
4 3 2 1 SETUP PROCEDURES (HARDWARE) 2. Set the Line termination switch of other system con- ■ Setup Procedures trollers to OFF. Perform the setup as follows. 12 3 4 5 6 7 8 1. Set the MODE switches. OFF ON You will set up the communication mode and line termi- nation ON/OFF of RS-485 communication. (Refer to System units MODE Switch Setting.) Line termination ON 2. Set CONTROLLER NO. switches. You will perform this setting when using two or more Line termination OFF system controllers in daisy c
Résumé du contenu de la page N° 19
SETUP PROCEDURES (FIRMWARE) Buttons pressed Setting Mode Description ■ Administrator Password Entry while the power-on If you log into the system in the administrator mode, 2, 4, and 6 All reset The communication PS·Data communication setting, all reset, operator pass- settings and word check. and database copy will become available. PS·Data database To activate the administrator mode, you need to enter the can be restored to the factory default.* administrator password. MON (ESC) and 6 PS·Data
Résumé du contenu de la page N° 20
4. Press the CAM (SET) button. ■ All Reset If the password entered is correct, all the settings will When the all reset mode is activated, all of the following set- be reset to the factory default. tings will be reset to the factory default. All Reset All Reset • Administrator password • PS·Data communication setting • LCD brightness, contrast, alarm buzzer, and button buzzer settings • Button functions and joystick button functions (F1 to F8, 5. Check “End” on the LCD. A, B, and top
