Résumé du contenu de la page N° 1
reless Card
Operating Instructions
Wireless Presentation Board
Model No. TY-FB10WPE
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
English
TQZH893-2
Résumé du contenu de la page N° 2
Contents Safety Precautions (Be sure to observe) ................ 3 Useful Functions ..................................................... 34 Selective area transmission ………………………………… 34 Handling Cautions ..................................................... 3 Secondary display transmission …………………………… 35 Before using wireless card ....................................... 3 One shot function ……………………………………………… 36 Shutter function ………………………………………………… 36 Accessories ............................
Résumé du contenu de la page N° 3
Safety Precautions (Be sure to observe) WARNING • Never attempt to disassemble or modify this product. To avoid fire, shock or failure. • If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the display. Switch off the display and unplug the power cord plug from the supply outlet. To avoid fire or shock, do not leave the power of the display turned on. • To avoid shock or other problems, do not leave the power cord plug plugged into the supply outlet. • P
Résumé du contenu de la page N° 4
Accessories • Remote control [N2QAFB000009] • Terminal function label (1 sheet) ON OFF INPUT ASPECT ENTER ( Affix this label to applicable slot of INDEX MENU RETURN the rear panel of the display.) ID SET ID ALL VOL • CD-ROM disc (Wireless Manager ME. etc) • Remote control batteries [TVD01013] R6 (UM3) x 2 • Screw × 4 (Slot cover cramping screw) • Wireless card [N5HZZ0000042] • Wireless card protection cover • Screw × 2 ( Screws for cramping wireless card protection cover)
Résumé du contenu de la page N° 5
Software Licensing Agreement Use of this Software is governed by the terms defined in this Software Licensing Agreement. Article 1 License Licensee is granted the right to use this software, including the information recorded or described on the CD-ROM and in the instruction manual and any other media provided to the Licensee (collectively “Software”), but all applicable rights to copyright or intellectual property in the Software are not transferable to the Licensee. Article 2 Use by a Thi
Résumé du contenu de la page N° 6
Notes on Using Wireless Connection Wireless equipment that has obtained a certificate of conformity is supplied with this unit. Wireless connection function of the unit uses radio waves in the 2.4 GHz band. A radio station license is not required, but be sure to read and fully understand the following items before use. Do not use near other wireless equipment. The following equipment may use radio waves in the same band as the unit. When the unit is used near these devices, radio wave interfere
Résumé du contenu de la page N° 7
Notes on Using Wireless Connection (cont.) Channels that can be used The channels (frequency range) that can be used differ according to the country or region. Refer to the table below. Frequency band Country or region Standard Channels used (Center frequency) Japan ARIB STD-T66 England, Germany, France, Spain, Italy, Belgium, Austria, Sweden, Norway, ETSI 300.328 Denmark, Switzerland, Holland, Finland, Portugal, Greece 2,412 MHz - 1 - 13 2,472 MHz Singapore IDA Australia, C-Tick New Zealand
Résumé du contenu de la page N° 8
Parts and their functions Remote control POWER ON button Input selector button Select the setting suitable for the connected device. POWER OFF button Function in the same way as ON OFF the INPUT button on the remote Enter button control for the display. (Refer to the INPUT Set the screen when Multi-live Mode instructions for the display.) (Index Style) is selected. ASPECT Screen mode button ENTER Function in the same way as the Left and right buttons ASPECT button on the remote Select
Résumé du contenu de la page N° 9
PC IN SER SLOT1 SLOT2 SLOT3 SLOT1 SLOT2 SLOT3 SLOT3 T1 SLOT2 SLOT2 SLOT3 Installing and removing the wireless card/Installing and removing the unit to the display Insert the wireless card into the unit. 1 (Push it until a click is heard.) When removing the card, push it until a click is heard and then remove it. Install the wireless card protection cover with 2 the two screws Wireless card protection cover Install the unit into the slot of the display. 3 See Slot Nos. of the display unit tha
Résumé du contenu de la page N° 10
Check your computer Necessary environment for computers to be connected • First, check your computer to see whether or not it has a built-in wireless LAN* function. *LAN : “Glossary” (See page 54) • Before connecting the unit to the computer, be sure to check the following settings. • Operation is not guaranteed for all wireless cards and built-in wireless LAN adapters. Check 1 Wireless LAN settings • Is your wireless LAN switched on?
Résumé du contenu de la page N° 11
Software Installation System requirements The computer must meet the following requirements in order to use the supplied software. OS: Microsoft Windows 2000 Professional/XP Home Edition/XP Professional ® ® CPU: Intel Pentium III 600 MHz or faster, or compatible processor (800 MHz or faster is recommended when using live mode) RAM: 256 MB or more Empty hard disk capacity: 60 MB or more Hardware conditions: CD or DVD drive (for software installation and viewing the user ’s manual) LAN
Résumé du contenu de la page N° 12
Software Installation (cont.) Contents on Provided CD-ROM When inserting the provided CD-ROM into the computer, the installer starts up automatically and the following screen appears. Notes • Shut down all software currently active on Windows. Otherwise, installation may not be possible. • Administrator authority is required for installation. • If the installer does not start up automatically, double-click [EasyInstall] → [Easy_Inst.exe] in the CD-ROM. • If Wireless Manager ME 1.0 / 2.0 / 3.0 ha
Résumé du contenu de la page N° 13
Installation free set up You can use Wireless Manager ME 4.0 without installing it in the computer. If you copy Wireless Manager ME 4.0 to a removable medium, such as an SD card, you can use Wireless Manager ME 4.0 without installing it in any computer that permits you to access this removal medium. Note When copying Wireless Manager ME 4.0 to a removable medium, empty capacity of at least 32 MB is required. Insert provided CD-ROM into the CD-ROM drive. 1 Setup screen appears. Click [Installati
Résumé du contenu de la page N° 14
Making Connections Notes • Although there are two possible connections methods using either “Simple” settings or “Detailed” settings, only “Detailed” settings can be used with this unit. Be sure to make connections as described below. • Only wireless LAN can be used to connect to this unit. • “Simple” settings are for use with projectors that use the same software and do not function with this unit. Connections Click [ ] on the desktop, 1 or select [Start] → [All Programs] → [Panasonic Wire
Résumé du contenu de la page N° 15
Making Connections (cont.) Click [Detailed]. 2 The units that can be connected are displayed on the “Select Access Port” window. Network [ ] appears when password entry is needed for When you specify the network number (See page 44) set connection. (See page 20) 1 on the unit from one of [1], [2], [3], [4], and [U (USER)] , Connection message units that are presently switched on in the selected Blinks when connection is not possible. network number are displayed in [Proje
Résumé du contenu de la page N° 16
Making Connections (cont.) In [Network], select the network number set for the unit. 3 • Units powered on in the chosen network group are listed. • This value is set to [1] by default. • For details on setting a network number for the unit, see page 44. Note If the selected unit does not appear some time after this operation, select the network number again, and check the selection status. Select the desired units, and click [OK]. 4 The launcher appears and the connection with the unit is estab
Résumé du contenu de la page N° 17
Making Connections (cont.) Connection error messages When wireless LAN connection cannot be established, [ ] blinks in the bottom left of the “Select Access Port” window. Click the [ ] button at this time to display information on resolving the issue as shown below. The displayed information is as follows. Detected issue Displayed information Remarks Reference page A firewall or [****] is installed. • Has your firewall in Windows XP been disabled? network bridge is When destination cannot be •
Résumé du contenu de la page N° 18
Making Connections (cont.) Detected issue Displayed information Remarks Reference page When a change in The settings of Wireless Network The wireless LAN utility used by the computer may the settings made connection have been changed. have changed the wireless settings. Close the utility, by the utility has When a Wireless LAN Card utility or and then make the connection again using easy been detected any other utilities are active, wireless set up connection. stop the operation of such util
Résumé du contenu de la page N° 19
Other operations for connection Canceling the connection Click [ ] on the launcher. 1 The following window appears. When connecting the unit for the first time The “Preservation of a Profile” window appears. Set the save destination and file name, and click [OK]. If you do not need to create a profile, click [Close]. Click [Yes]. 2 The computer returns to the original network settings when the connection is ended. However, note that some time may be needed to return to the original network sett
Résumé du contenu de la page N° 20
Other operations for connection (cont.) Operations when password entry is required for connection When a unit with the [ ] mark is selected, the window shown to the right appears. Enter the password and click [OK]. (See page 48) Notes • Click [CANCEL] at the password entry window to return to launcher (See page 22). • When an incorrect password is entered, an error message appears. Click [OK] to return to the password entry window and enter the correct password again. Adding and deleting conne
