Résumé du contenu de la page N° 1
motorola H720
Quick Start Guide
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
congratulations congratulations Your Motorola H720 headset is designed for quick connections, clear calls, and lasting comfort. We’ve crammed all of the main features of your headset into this handy guide, and in a matter of minutes we’ll show you just how easy your headset is to use. So go on, check it out. more information on the Web: www.motorola.com/support Caution: Before using your headset for the first time, please read the important Safety, Regulatory & Legal information at the bac
Résumé du contenu de la page N° 4
your headset your headset the important buttons and connectors Earhook Charging Indicator Port Light Volume Boom Buttons Call Button Microphone 2
Résumé du contenu de la page N° 5
charge it charge it let’s get you up and running Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset. 3
Résumé du contenu de la page N° 6
basics basics a few essentials to get you started turn it on & off To turn on your headset, flip the boom to open (extended) position. To turn off your headset, flip the boom closed (folded under the headset body). wear it Your headset comes ready for the right ear. Just open the boom, flex the earhook and loop it over your ear. Make sure the speaker aligns with your ear canal, and the microphone is pointing towards your mouth. Note: To use your headset with your left ear, see “change f
Résumé du contenu de la page N° 7
pair & connect pair & connect connect and go 1 Turn off any Bluetooth devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Turn on your headset (see page 4 for help). The indicator light becomes steadily lit in blue. 4 Set your phone to search for Bluetooth devices. 5 Select Motorola H720 from the search results on your phone. 6 Select Ok or Yes to pair your headset with your phone. Note: If prompted for the passkey, enter 0000. When your headset su
Résumé du contenu de la page N° 8
pair & connect For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset and phone will connect automatically! test your connection 1 Turn on your headset and put it on. 2 On your phone, dial a phone number and press the Call/Send key. If your phone and headset are successfully connected, you hear ringing on the headset. 6
Résumé du contenu de la page N° 9
calls calls it’s good to talk Note: Some features are phone/network dependent. To Press the Call button. answer a call ignore a call Press and hold a Volume button until you hear a tone. make a voice dial call Press the Call button and wait for voice prompt. redial last call Press and hold the Call button until you hear two tones. mute or unmute a call Press both Volume buttons. end a call Press the Call button. answer or reject Use phone to answer/reject second incoming call second call (f
Résumé du contenu de la page N° 10
talk time talk time check your chat time Press and hold both Volume buttons while not on a call. If light shows... your talk time is... red less than 4 hours purple between 4 to 7.5 hours blue up to 8 hours To save battery power, turn off the headset when not using it. 8
Résumé du contenu de la page N° 11
status light status light know your headset when charging If light shows... your headset is... red charging (battery level less than 50% charge) purple charging (battery level more than 50% charge) blue fully charged when operating If light shows... your headset is three blue flashes powering on/off steady blue in pairing/connect mode rapid blue/purple flashes connecting to your phone quick blue flash receiving or making a call slow blue pulse on a call slow blue flash in standby (not on a ca
Résumé du contenu de la page N° 12
status light If light shows... your headset is slow red flash idle (not connected to a phone) slow purple pulse muting the call steady red trying to connect to your phone quick red flash in a low battery state Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. 10
Résumé du contenu de la page N° 13
status tones status tones hear what’s happening Your headset is... when you hear... powering on an ascending tone powering off two descending tones receiving a call a ring tone at maximum or minimum two short tones when volume pressing Volume button in a low battery state high/low tones repeated every 60 seconds out of range of your phone no audio indications; deteriorating quality connected to your phone three ascending tones enabling call mute two rapid ascending tones disabling call mut
Résumé du contenu de la page N° 14
status tones Your headset is... when you hear... in call mute status a low tone every 10 seconds 12
Résumé du contenu de la page N° 15
tips & tricks tips & tricks a few shortcuts To... reset your Caution: This action erases all headset pairing information stored in your headset. With the headset on, press and hold both Volume buttons and Call button for 10 seconds until the indicator light is steady blue. 13
Résumé du contenu de la page N° 16
customize customize make some changes change for left ear use Open the boom and earhook Ear hook Hinge pin and gently lift top of the earhook up and off, flip the headset over, and then hook bottom of the earhook onto the lower hinge pin and lift top of the earhook up and on to the upper hingepin. set volume button Close the boom on your Volume keys headset, press and hold the Volume button you want to assign as “volume up” , and then open the boom. The light flashes blue three Indic
Résumé du contenu de la page N° 17
problems? problems? we’ve got solutions My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesn't find my headset Make sure the indicator light on your headset is on (lit
Résumé du contenu de la page N° 18
support support we’re here to help If you have questions or need assistance, contact us at 1-877-MOTOBLU, or visit us at www.motorola.com/ Bluetoothsupport or www.motorola com/bluetoothconnect. 16
Résumé du contenu de la page N° 19
Safety, Regulatory & Legal Safety Information European Union Directives Conformance Statement EU Conformance Hereby, Motorola declares that this product is in compliance with: • The essential requirements and other relevant provisions of Directive 1999/5/EC � All other relevant EU Directives Product Approval Number The above gives an example of a typical Product Approval Number. You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.mo
Résumé du contenu de la page N° 20
shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third-party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Safety & General Information Safety Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Approved Accessor
