Résumé du contenu de la page N° 4
Contents MultiVOIP FXS User Guide CHAPTER 6: PHONEBOOK CONFIGURATION.............................................................................................................84 CONFIGURING MULTIVOIP PHONEBOOKS .............................................................................................................................85 PHONEBOOK EXAMPLES ........................................................................................................................................
Résumé du contenu de la page N° 5
Chapter 1: Overview 5
Résumé du contenu de la page N° 6
Overview MultiVOIP FXS User Guide About This Manual This manual is about Voice-over-IP products made by Multi-Tech Systems, Inc. It describes three analog TM MultiVOIP FX units that operate with the SIP transmission protocol only and use the FXS telephony interface only, namely, models MVPFXS-24, MVPFXS-16, and MVPFXS-8. At this writing, only the MVPFXS-24 model has been released; the MVPFXS-16 and MVPFXS-8 will be forthcoming. These MultiVOIP units can inter-operate with other con
Résumé du contenu de la page N° 7
MultiVOIP FXS User Guide Overview Introduction to Analog MultiVOIP FX SIP FXS-only Gateway Voice-over-IP Units (MVPFXS-8/16/24) TM VOIP: The Free Ride. We proudly present Multi-Tech's MVPFXS-8/16/24 MultiVOIP FXS SIP Gateways. These three models allow voice/fax communication to be transmitted at no additional expense over your existing IP network, which has ordinarily been data only. To access this free voice and fax communication, you simply connect the MultiVOIP to your telephone
Résumé du contenu de la page N° 8
Overview MultiVOIP FXS User Guide Phone System Transparency. These MultiVOIPs inter-operate with a telephone switch or PBX, acting as a switching device that directs voice and fax calls over an IP network. The MultiVOIPs have “phonebooks,” directories that determine to who calls may be made and the sequences that must be used to complete calls through the MultiVOIP. The phonebooks allow the phone user to interact with the VOIP system just as they would with an ordinary PBX or telco s
Résumé du contenu de la page N° 9
MultiVOIP FXS User Guide Overview The primary advantage of the web GUI (over a GUI that requires a local connection) is remote access for control and configuration. The controller PC and the MultiVOIP unit itself must both be connected to the same IP network and their IP addresses must be known. Logging of System Events. MultiTech has built SysLog Server functionality into the software of the MultiVOIP units. SysLog is a de facto standard for logging events in network communication s
Résumé du contenu de la page N° 10
Overview MultiVOIP FXS User Guide MultiVOIP Front Panel LEDs LED Types. The MultiVOIPs have two types of LEDs on their front panels: (1) general operation LED indicators (for power, booting, and ethernet functions), and (2) channel operation LED indicators that describe the data traffic and performance in each VOIP data channel. Active LEDs. On the MVPFXS units, there are four WAN LEDs and twenty-four channel-operation LEDs. However, on the MVPFXS-8, only the left eight sets
Résumé du contenu de la page N° 11
MultiVOIP FXS User Guide Overview Computer Requirements The command computer used in conjunction with the MultiVOIP must meet these requirements: (a) any reasonably modern PC, (b) must have an up-to-date version of Java installed (v. 1.5 or higher), (c) must have an up-to-date web browser installed (at this writing, up-to-date browsers would include Internet Explorer 6.0(+), Netscape 6.0(+), or Mozilla FireFox 1.0(+).), (d) must have IP access to the MultiVOIP, and (e) optionally,
Résumé du contenu de la page N° 12
Overview MultiVOIP FXS User Guide Installation at a Glance The basic steps of installing your MultiVOIP network involve unpacking the units, connecting the cables, and configuring the units using the MultiVOIP web-based graphic user interface (GUI), and confirming connectivity with another voip site. This process results in a fully functional Voice-Over-IP network. Related Documentation The MultiVOIP User Guide (the document you are now reading) comes in electronic form and is included
Résumé du contenu de la page N° 13
Chapter 2: Quick Start Guide 13
Résumé du contenu de la page N° 14
Preliminaries & Info Gathering MultiVOIP FXS Quick Start Guide This chapter contains streamlined instructions to get the MultiVOIP up and running quickly. These start- up instructions include assistance on setting up the MultiVOIP’s Inbound and Outbound Phonebooks. These sections of the Quick Start Guide may be particularly useful for phonebook configuration: Phonebook Starter Configuration Phonebook Tips Phonebook Example (One Common Situation) The Quick Start Guide also contains a “
Résumé du contenu de la page N° 15
MultiVOIP FXS Quick Start Guide Preliminaries & Info Gathering Phone/IP Details *Absolutely Needed* Before Starting the Installation The MultiVOIP will interface with both the IP network and the phone system. You must gather information about the IP network and about the phone system so that the MultiVOIP can be configured to operate with them properly. A summary of this configuration information appears on page 16 (“Config Info CheckList”). Gather IP Information Ask your computer ne
Résumé du contenu de la page N° 16
Preliminaries & Info Gathering MultiVOIP FXS Quick Start Guide Config Info CheckList Type of Config Info MultiVOIP Gathered Configuration screen on which to enter Config Info √ IP info for voip unit IP Parameters ● IP address ● Gateway ● DNS IP (if used) Interface Type Interface Parameters *In FXO/FXS systems, channels used (FXS only*) for phone, fax, or key system are FXS; channels used for analog PBX extensions or analog telco lines are FXO. Country Code Regio
Résumé du contenu de la page N° 1
TM
MultiVOIP FX
FXS-Only SIP Gateways
User Guide for Voice/IP Gateways
Models: MVPFXS-8
MVPFXS-16
MVPFXS-24
Résumé du contenu de la page N° 2
User Guide S000415A MultiVOIP FX Analog FXS-Only Gateways (Models MVPFXS-8, MVPFXS-16 & MVPFXS-24) This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2006, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for an
Résumé du contenu de la page N° 3
CONTENTS CHAPTER 1: OVERVIEW......................................................................................................................................................5 ABOUT THIS MANUAL..............................................................................................................................................................6 INTRODUCTION TO ANALOG MULTIVOIP FX SIP FXS-ONLY GATEWAY VOICE-OVER-IP UNITS (MVPFXS-8/16/24) ..........7 MultiVOIP Front Panel LEDs ...
Résumé du contenu de la page N° 17
MultiVOIP FXS Quick Start Guide Command PC & Voip Hookups Command/Control Computer Setup (Specs & Settings) The computer used for command and control of the MultiVOIP (a) any reasonably modern PC, (b) must have an up-to-date version of Java installed (v. 1.5 or higher), (c) must have an up-to-date web browser installed (at this writing, up-to-date browsers would include Internet Explorer 6.0(+), Netscape 6.0(+), or Mozilla FireFox 1.0(+).), (d) must have IP access to the MultiVOI
Résumé du contenu de la page N° 18
Command PC & Voip Hookups MultiVOIP FXS Quick Start Guide Quick Hookup for MVPFXS-8/16/24 18
Résumé du contenu de la page N° 19
Auxiliary Software Issues MultiVOIP FXS Quick Start Guide Ensure that Java & Browser Versions will Support Web-Based GUI For more details, see Chapter 4: Software Installation in User Guide. 1. MultiVOIP must be properly cabled. Power must be turned on. 2. Is Java Runtime program at level 1.5 or greater? If not, load up-to-date Java version from MultiVOIP CD or from Java web site. 3. Is web browser of a sufficiently recent version to support MultiVOIP web GUI? (The browser must b
Résumé du contenu de la page N° 20
Phone/IP Starter Config. MultiVOIP FX Quick Start Guide 3. Establish a ‘connection’ in HyperTerminal. 4. Check that HyperTerminal is addressing the correct COM port. 20
