Résumé du contenu de la page N° 1
English – GN 6110 user guide
This user guide provides you with information on setting up, using and maintaining your GN 6110.
CONTENTS
1. Product information
1.1 GN 6110 – what’s in the box
1.2 Parts and signatures
2. Assembling your GN 6110
2.1 Setting up for desk telephone use
Connecting cords
Charging headset
Clear dial tone adjustment
2.2 Setting up for mobile telephone use
Pairing
3. Operating the GN 6110
3.1 Operation – with desk telephone
3.2 Operation – with mobile tele
Résumé du contenu de la page N° 2
AUX G F 2 1.1 GN 6110 – What’s in the box 1 1 GN 6110 headset, with built-in rechargeable battery 2 GN 6110 base (connectivity unit) 3 Connection cord for telephone 3 5 connection 4 Power adapter with cord 4 5 Quick Set Up guide 6 User guide 7 Cord management strips 8 8 Headset travel charger (90-240 V) 6 7 1.2 GN 6110 – Parts and signatures 5 13 12 14 4 2 3 1 7 11 6 15 8 10 9 16 21 20 18 17 23 19 22 1 Power adapter socket 13 On-line indicator 2 Telephone socket 14 Charging cradle 3 Handset so
Résumé du contenu de la page N° 3
AUX AUX 2. Assembling your GN 6110 First assemble your GN 6110 to work with your desk telephone, and then set it up to work with your mobile phone. The GN 6110 supports the GN 1000 Remote Handset Lifter for desk telephones. See Section 4.3 for hook switch set up instructions and use. 2.1 Setting up for desk telephone use Connecting cords To set up your GN 6110, connect the cords by completing the following instructions: B A 1. Connect the power adapter cord to the socket marked 2 [A]. All of
Résumé du contenu de la page N° 4
G F G G E F F Pairing of headset to the base and verifying pairing The headset and the base in their original product box have been factory-paired to ensure proper functioning of your GN 6110. You do not need to pair these two devices, and you may now proceed to the Clear dial tone adjustment section. If original pairing is lost (by resetting the base, changing your headset or changing your base), you will have to pair your headset to the base again. You may also verify pairing between the h
Résumé du contenu de la page N° 5
2.2 Setting up for mobile telephone use The GN 6110 headset is also compatible with Bluetooth mobile phones. The mobile phone you use with your GN 6110 must be Bluetooth technology-equipped. Setting up the headset to a mobile phone (pairing) Before using your headset for the fi rst time with a mobile phone, you must pair your headset and mobile telephone by completing the following: 1. Press and hold down the Multifunction Button on the headset for A 5 seconds, after which the headset indica
Résumé du contenu de la page N° 6
Turning headset OFF: Close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off. Making calls: 1. With the boom arm open, press the Multifunc- tion Button on either the headset [C] or the base [B]. An audible tone will be heard and the con- nection will be established shortly. C A B 2. Lift the telephone’s handset, or press the tele- phone’s line button if your telephone has one. A dial tone will be heard. 3. Dial the desired number when the dial tone
Résumé du contenu de la page N° 7
3.2 Operation – with mobile telephone If your headset is in its base, press the release headset button to free the headset before using it. Turning headset ON: Open the headset boom arm. The headset indicator lights for 2 seconds, and then continue to fl ash slowly as long as the headset is on. Turning headset OFF: Close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off. Making calls: 1. Open the headset boom arm and place the headset on the ear. 2.
Résumé du contenu de la page N° 8
Headset <-- --> mobile phone switching (while on a call). B A To switch from using the headset to mobile phone during a call: 1. Terminate the link between the headset and the mobile phone by closing the headset boom arm [A] Note: do not press the Multifunction Button. 2. The mobile phone will prompt you to continue the call [B]. 3. You have 30 seconds to accept the transfer to your mobile phone; after accepting continue the call on your mobile phone. 4. To end the call, use the mobil
Résumé du contenu de la page N° 9
G F You will need to make 2 calls to adjust the volume match, one using your mobile phone and the other using the desk telephone. 1. Open the compartment cover on the bottom of the base and locate the black volume match button [A] 2. Using your mobile telephone, make an initial test call to someone and have A a brief conversation, keeping in mind the volume level of the conversation. 3. Using your desk telephone, make a second test call to the same person. 4. While speaking with your test per
Résumé du contenu de la page N° 10
To connect your GN 1000 to the GN 6110, complete the following: 1. Connect the GN 1000’s connector cord to the yellow-marked hook switch [AUX] socket on the bottom of the base [A]. 2. Consult the GN 1000 user guide to complete the set up. Note: If you cannot locate the GN 1000 product box and/or user guide, A consult GN Netcom’s web pages at www.gnnetcom.dk. Your GN 6110 is now ready to use with your GN 1000, and you may proceed to Section 4.4. 4.4 Operation with your GN 1000 RHL (accesso
Résumé du contenu de la page N° 11
2. You may continue wearing your headset, or replace the (closed) headset boom arm in the base for charging. A Headset <-- --> handset switching (while on a call) To switch from using the headset to the handset during a call: 1. Pick up the telephone’s handset [A]. 2. Close the headset boom arm [B], or press the Multifunction Button on the base [C] or the headset [D] to continue the call on the handset. 3. To end the call, hang up the telephone handset. D B C Note: Closing the boom arm gi
Résumé du contenu de la page N° 12
Battery charge indication The headset indicator lights to indicate charging, and will turn off when fully charged. The 4 lights of the battery indicator show the approximate battery charge level of the headset: 1 lit indicator represents 25% of a full charge (will fl ash if less than 25%) 4 lit indicators represent a full charge. Charging with the travel charger The travel charger works universally (90-240 V), letting you charge the headset in any country. You will need to purchase sepa
Résumé du contenu de la page N° 13
G F Successful pairing will be indicated by 10 rapid fl ashes of both the headset indicator and the pairing indicator. A beep will also be heard in the headset. Verifying pairing To verify pairing, create an audio link between the headset and base by completing the following: 1. With the boom arm open, press the Multifunc- tion Button on either the headset [C] or the base [B]. C An audible tone will be heard, and the headset A B indicator and online indicator will fl ash rapidly. 2. To end
Résumé du contenu de la page N° 14
The headset’s audio indicators: Headset action Audio indication Volume Limit Repeated single high tone when min. or max. limits achieved (when button is pressed) Low Battery Tone Two rapid high tones repeated every 20 seconds Out of Range No audio indications; gradual deterioration of audio quality Incoming Call from Mobile Ring tone A Incoming Call from desk phone Ring tone B (only when using hook switch) Pairing Confi rmation – with base 2 single tones – with mobile 1 single tone Establish A
Résumé du contenu de la page N° 15
Base’s multifunction indicator Multifunction indicator Battery indication Number of lit indicators indicates level of charge 1 fl ashing indicator < 25% charged 1 lit indicator = 25% charged 2 lit indicators = 50% charged 3 lit indicators = 75% charged 4 lit indicators = 100% charged ALL base’s indicators All indicators Power is turned ON Flash for a few moments. 5. Frequently asked questions Should I unplug my telephone’s line cord from the wall? No, do not unplug your telephone’s line cord from
Résumé du contenu de la page N° 16
What is the clear dial tone adjustment for? Desk telephones operate on a wide range of standards and use different kinds of internal compo- nents. The GN 6110 works with a very wide range of desk telephones, but it still must be set to match your desk telephone’s standard. The GN 6110’s termination switch (located at the bottom of the base) has a sliding 7-setting that must be adjusted until you hear a clear, crisp dial tone. Once you have a clear dial tone, your GN 6110 is correctly adjusted
Résumé du contenu de la page N° 17
Declaration This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN Netcom as declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonised within EU. Within the EU, this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands,
Résumé du contenu de la page N° 18
5. If the telephone company requests information on what equipment is connected to their lines, inform them of: (a) The telephone number that this unit is connected to. (b) The FCC Registration number located on the label. Canada IC Notice to Users/Product Statements Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term
