Résumé du contenu de la page N° 1
USER’S
GUIDE
Ultra160
SCSI to PCI
Host Adapters
October 2001
Version 1.1
®
DB15-000183-01
Résumé du contenu de la page N° 2
Electromagnetic Compatibility Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Résumé du contenu de la page N° 3
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB15-000183-01, Second Edition (Octobe
Résumé du contenu de la page N° 4
iv
Résumé du contenu de la page N° 5
Preface This book is the user’s guide for all LSI Logic Ultra160 SCSI to PCI Host Adapters. It contains a functional description for the Ultra160 SCSI boards as well as physical and electrical specifications. Audience This document assumes that you have some familiarity with SCSI protocol and related support devices. This document benefits people installing and using the various Ultra160 SCSI to PCI Host Adapter Boards. Organization This document has the following chapters and appendixes: • Chapte
Résumé du contenu de la page N° 6
Related Publications PCI Storage Device Management System SDMS™ 4.0 User’s Guide, Version 1.2, LSI Logic Corporation (only available in PDF format from LSI Logic Web Site http://www.lsilogic.com) LSI53C1000 PCI to Ultra160 SCSI Controller Technical Manual, Version 2.1, LSI Logic Corporation, Order No. S14050.A LSI53C1010-33 PCI to Dual Channel Ultra160 SCSI Multifunction Controller Technical Manual, Version 3.2, LSI Logic Corporation, Order No. S14025.B LSI53C1010-66 PCI to Dual Channel Ultra160
Résumé du contenu de la page N° 7
Contents Chapter 1 Quick Installation Procedures 1.1 General Description 1-1 1.2 Obtaining Windows NT/Windows 2000 Drivers 1-2 1.3 Quick Host Adapter Installation 1-3 1.4 Quick Windows NT/Windows 2000 Driver Installation 1-4 Chapter 2 Detailed Host Adapter Installation 2.1 Installing your Ultra160 SCSI Host Adapter 2-1 2.1.1 Selecting a PCI Slot 2-1 2.1.2 Inserting the Host Adapter 2-2 2.2 Connecting SCSI Peripherals 2-4 2.2.1 Making Internal Wide SCSI Bus Connections 2-4 2.2.2 Making External S
Résumé du contenu de la page N° 8
3.3.1 Internal SCSI Cables 3-10 3.3.2 External SCSI Cables and Connectors 3-11 3.4 Technical Specifications 3-13 3.4.1 Electrical Characteristics 3-14 3.4.2 Thermal, Atmospheric Characteristics 3-15 3.4.3 Safety Characteristics 3-15 Appendix A Glossary of Terms and Abbreviations Index Customer Feedback viii Contents
Résumé du contenu de la page N° 9
Figures 2.1 Hardware Connections for the Host Adapter 2-3 2.2 Inserting the Host Adapter 2-4 2.3 Internal SCSI Ribbon Cable to Host Adapter 2-5 2.4 Multiple Internal SCSI Devices Chained Together 2-6 2.5 External SCSI Connection to an External SCSI Device 2-7 2.6 Multiple External SCSI Devices Chained Together 2-8 2.7 Autotermination Shunt 2-9 3.1 LSI20160 Mechanical Drawing 3-3 3.2 LSI20160L Mechanical Drawing 3-4 3.3 LSI22903 Mechanical Drawing 3-5 3.4 LSI22915A Mechanical Drawing 3-6 3.5 ITI6
Résumé du contenu de la page N° 10
x Contents
Résumé du contenu de la page N° 11
Tables 2.1 SCSI ID Record 2-10 3.1 Ultra160 SCSI to PCI Host Adapter Boards 3-1 3.2 Host Adapter Characteristics 3-2 3.3 Cable Specifications 3-10 3.4 Maximum Power Requirements 3-14 Contents xi
Résumé du contenu de la page N° 12
xii Contents
Résumé du contenu de la page N° 13
Chapter 1 Quick Installation Procedures This chapter contains general information about Ultra160 SCSI controllers and host adapters. It provides quick host adapter installation instructions for experienced computer users and instructions for SCSI bus setup. It also provides quick installation instructions for Windows NT or Windows 2000 device drivers. This chapter describes these topics: • Section 1.1, “General Description,” page 1-1 • Section 1.2, “Obtaining Windows NT/Windows 2000 Drivers,” pa
Résumé du contenu de la page N° 14
For specific information about the Ultra160 SCSI controllers, refer to the related publications section in the Preface. 1.2 Obtaining Windows NT/Windows 2000 Drivers Before you begin the Ultra160 SCSI host adapter installation, create a Windows NT or Windows 2000 driver diskette by copying the driver files from either the LSI Logic SDMS CD-ROM or from the LSI Logic web site at http://www.lsilogic.com. If you obtain the driver software from the LSI Logic web site, the zipped package that you downlo
Résumé du contenu de la page N° 15
1.3 Quick Host Adapter Installation If you are an experienced computer user with prior host adapter installation and SCSI bus setup experience, this section may sufficiently describe the installation procedure for you. If you prefer more detailed instructions and guidance, refer to Section 2.1, “Installing your Ultra160 SCSI Host Adapter,” page 2-1. To install an LSI Logic Ultra160 SCSI to PCI Host Adapter, follow these steps: Step 1. Ground yourself before handling the host adapter board to disc
Résumé du contenu de la page N° 16
1.4 Quick Windows NT/Windows 2000 Driver Installation To load the SYM_U3.SYS miniport driver during a new Windows NT or Windows 2000 system installation, you can boot directly from the Microsoft installation CD-ROM. The Windows NT 4.0 and Windows 2000 drivers are not interchangeable, however the instructions are very similar. To install a new Windows NT or Windows 2000 operating system and its appropriate device driver, follow these steps: Step 1. Have the Windows NT driver diskette or Windows 2
Résumé du contenu de la page N° 17
Chapter 2 Detailed Host Adapter Installation This chapter provides detailed instructions on how to install the LSI Logic Ultra160 SCSI to PCI host adapters and includes these topics: • Section 2.1, “Installing your Ultra160 SCSI Host Adapter,” page 2-1 • Section 2.2, “Connecting SCSI Peripherals,” page 2-4 • Section 2.3, “Terminating the SCSI Bus,” page 2-8 • Section 2.4, “Completing the Installation,” page 2-11 2.1 Installing your Ultra160 SCSI Host Adapter This section provides detailed instru
Résumé du contenu de la page N° 18
Step 4. Remove the cabinet cover on your computer to access the PCI slots. Step 5. Locate the PCI slots on your computer. Use a 32-bit slot for 32-bit host adapters and a 64-bit slot for 64-bit host adapters. You may insert a 64-bit host adapter into a 32-bit slot if not 64-bit slots are available. Refer to the user’s manual supplied with your computer to confirm the location of the PCI slots. 2.1.2 Inserting the Host Adapter Perform the following steps to install your Ultra160 SCSI Host Adapter
Résumé du contenu de la page N° 19
Figure 2.1 Hardware Connections for the Host Adapter J5 Channel B 68-Pin Internal High Density SCSI Connector J2 Channel A 68-Pin Internal High Density SCSI Connector J3 J6 Channel A 50-Pin Busy LED Connector External High Density SCSI Connector J4 Channel A 50-Pin Internal Low Density SCSI Connector J1 Ultra160 SCSI PCI Bus Edge Connector Note: Notice that the components on a Ultra160 SCSI to PCI host adapter face the opposite way from non-PCI adapter boards you may have in your system. This i
Résumé du contenu de la page N° 20
Figure 2.2 Inserting the Host Adapter Secure the bracket with the bracket screw. Bracket around connector J3 fits where blank bracket panel was removed. 32-Bit slots If you plug a 64-bit card into a 32-bit slot, be careful not to damage the main board. 64-Bit slots 2.2 Connecting SCSI Peripherals This section provides information about making internal and external SCSI connections. 2.2.1 Making Internal Wide SCSI Bus Connections This section provides step-by-step instructions for making internal
