Résumé du contenu de la page N° 1
USER’S
GUIDE
LSIU80ALVD
PCI to Ultra2 SCSI
Host Adapter
August 2004
Version 2.0
®
DB15-000320-00
Résumé du contenu de la page N° 2
Electromagnetic Compatibility Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Résumé du contenu de la page N° 3
This document contains proprietary information of LSI Logic Corporation. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. LSI Logic products are not intended for use in life-support appliances, devices, or systems. Use of any LSI Logic product in such applications without written consent of the appropriate LSI Logic officer is prohibited. Document DB15-000320-00, August 2004 This docum
Résumé du contenu de la page N° 4
iv
Résumé du contenu de la page N° 5
Preface This book is the primary reference and user’s guide for the LSIU80ALVD PCI to Ultra2 SCSI Host Adapter. It contains a complete functional description for the LSIU80ALVD and includes complete physical and electrical specifications for the LSIU80ALVD. Audience This document assumes that you have some familiarity with microprocessors and related support devices. The people who benefit from this book are: • Engineers and managers who are evaluating the processor for possible use in a system •
Résumé du contenu de la page N° 6
Related Publications PCI Storage Device Management System SDMS™ 4.0 User’s Guide, Document DB15-000099-01 Revision Record Revision Date Remarks 2.0 8/04 Final version. First printing. vi Preface
Résumé du contenu de la page N° 7
Contents Chapter 1 Using the LSIU80ALVD 1.1 General Description 1-1 1.2 Features 1-2 1.2.1 PCI Interface 1-2 1.2.2 SCSI Interface 1-2 1.2.3 Board Characteristics 1-3 1.3 Interface Descriptions 1-3 1.3.1 The PCI Interface 1-3 1.3.2 The SCSI Interface 1-4 1.3.3 Ultra2 SCSI Technology 1-5 1.3.4 LVDlink Technology 1-5 1.3.5 On-Board LED 1-6 Chapter 2 Installing the LSIU80ALVD 2.1 Quick Installation Procedure 2-1 2.2 Detailed Installation Procedure 2-3 2.2.1 Before You Start 2-3 2.2.2 Inserting the H
Résumé du contenu de la page N° 8
Chapter 3 Configuring the LSIU80ALVD 3.1 When to Configure the LSIU80ALVD 3-1 3.2 Starting the SCSI BIOS Configuration Utility 3-2 3.2.1 Configuration Utility Main Menu 3-3 3.2.2 Utilities Menu 3-7 3.2.3 Device Selections Menu 3-11 3.3 Exiting the SCSI BIOS Configuration Utility 3-14 Appendix A Technical Specifications A.1 Physical Environment A-1 A.1.1 Physical Characteristics A-1 A.1.2 Electrical Characteristics A-2 A.1.3 Thermal, Atmospheric Characteristics A-3 A.1.4 Electromagnetic Compliance A-3
Résumé du contenu de la page N° 9
Figures 2.1 Hardware Connections for the LSIU80ALVD 2-5 2.2 Inserting the Host Adapter 2-6 2.3 SCSI Cables 2-9 2.4 Internal SCSI Ribbon Cable to Host Adapter Connection 2-10 2.5 Internal SCSI Ribbon Cable to Internal SCSI Device Connection 2-11 2.6 Connecting Additional Internal SCSI Devices 2-12 2.7 Multiple Internal SCSI Devices Chained Together 2-13 2.8 SCSI LED Connector 2-14 2.9 External Cable to Host Adapter 2-15 2.10 External SCSI Device Cable 2-16 2.11 Multiple External SCSI Devices Chai
Résumé du contenu de la page N° 10
x Contents
Résumé du contenu de la page N° 11
Tables 2.1 SCSI Bus Widths and Speeds 2-7 2.2 SCSI Bus Lengths 2-8 2.3 SCSI ID Record 2-23 3.1 Global Default Settings 3-1 3.2 Device Default Settings 3-2 A.1 Maximum Power Requirements A-2 A.2 PCI Connector J1 (Front) A-5 A.3 PCI Connector J1 (Back) A-6 A.4 Internal SCSI Connector J2 A-8 A.5 External SCSI Connector J3 A-9 A.6 LED Connector J4 A-10 Contents xi
Résumé du contenu de la page N° 12
xii Contents
Résumé du contenu de la page N° 13
Chapter 1 Using the LSIU80ALVD This chapter describes the LSIU80ALVD PCI to Ultra2 SCSI Host Adapter board interface to PCI computer systems and includes these topics: • Section 1.1, “General Description,” page 1-1 • Section 1.2, “Features,” page 1-2 • Section 1.3, “Interface Descriptions,” page 1-3 1.1 General Description The LSIU80ALVD provides an Ultra2 SCSI interface to PCI computer systems. It will be referred to as the LSIU80ALVD throughout this manual. Installing this adapter in your PCI
Résumé du contenu de la page N° 14
1.2 Features This section provides a high level overview of the PCI Interface, the SCSI Interface, and Board Characteristics for the LSIU80ALVD. 1.2.1 PCI Interface • Full 32-bit DMA bus master • Zero wait-state bus master data bursts up to 133 Mbytes/s (@ 33 MHz) • Universal 3.3 V and 5 V PCI bus voltage support • Supports 32-bit 33 MHz data bursts with variable burst lengths • Bursts 2 to 128 dwords across the PCI bus • Prefetches up to 8 Dwords of SCRIPTs instructions • Supports PCI Write and
Résumé du contenu de la page N° 15
• Performs complex SCSI bus sequences without interrupts, including restore data pointers • Serial EEPROM for user configuration utility • SCSI bus activity LED connector and on-board LED 1.2.3 Board Characteristics • PCI board dimensions, 152.4 x 88.90 mm (6.00 x 3.5 inches) • PCI Universal 32-bit card edge connector • HD 68-pin external connector • HD 68-pin internal connector A mechanical drawing showing board dimensions and component layout is located in Appendix A, “Technical Specifications.”
Résumé du contenu de la page N° 16
1.3.2 The SCSI Interface The SCSI functionality for the LSIU80ALVD is contained within the LSI53C895A. The LSI53C895A connects directly to the SCSI bus and generates signal timing and bus protocol in compliance with the SCSI standard. The SCSI interface on the LSIU80ALVD operates as an 8-bit or 16-bit interface. It supports 8-bit or 16-bit, synchronous and asynchronous, LVD or SE, Fast, Ultra and Ultra2 SCSI protocols in various combinations. The interface is made through connectors J2 and J3 (s
Résumé du contenu de la page N° 17
1.3.3 Ultra2 SCSI Technology The LSIU80ALVD fully supports Ultra2 SCSI. Ultra2 SCSI is an extension of the SCSI Parallel Interface 2 and 3 (SPI-2 and SPI-3) family of standards that expands the bandwidth of the SCSI bus, allowing faster synchronous data transfers. For the internal bus, special impedance SCSI ribbon cables are specified for operation with Ultra and Ultra2 SCSI devices. You must consider the total length of the bus cables and the number of devices on the SCSI bus when setting up yo
Résumé du contenu de la page N° 18
1.3.4.1 Benefits of LVDlink The LSI53C895A supports LVD for SCSI, which is a signaling technology that increases the reliability of SCSI data transfers over longer distances than supported by SE SCSI. The low current output of LVD allows the I/O transceivers to be integrated directly into the chip. LVD provides the reliability of HVD SCSI without the added cost of external differential transceivers. Ultra2 SCSI with LVD allows a longer SCSI cable and more devices on the bus, using the same cables
Résumé du contenu de la page N° 19
Chapter 2 Installing the LSIU80ALVD This chapter provides instructions on how to install the LSIU80ALVD and includes these topics: • Section 2.1, “Quick Installation Procedure,” page 2-1 • Section 2.2, “Detailed Installation Procedure,” page 2-3 • Section 2.3, “Completing the Installation,” page 2-24 2.1 Quick Installation Procedure This section is provided for the experienced computer user with prior host adapter installation and SCSI bus setup experience. If you prefer a more detailed guidance
Résumé du contenu de la page N° 20
Step 4. Locate the slots for installing a PCI plug-in board. The LSIU80ALVD requires a PCI slot that allows bus master operation. See Table 2.2. Step 5. Remove the blank bracket panel on the back of the computer aligned with the PCI slot you intend to use. Save the bracket screw. Step 6. Carefully insert the edge connector J1 of the host adapter into the PCI slot. Make sure the edge connector is properly aligned before pressing the board into place. See Figure 2.2. Note: You may notice that the