Résumé du contenu de la page N° 1
MarkNet internal
print servers
MarkNet N2000 series and
MarkNet S
Quick Start
Jan 2000
www.lexmark.com
Résumé du contenu de la page N° 2
Edition: January 2000 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to
Résumé du contenu de la page N° 3
MarkNet internal print server Quick Start Setup - - - - - - - - - - - - - - - - - - - - 4 Prerequisites - - - - - - - - - - - - - - - - - - - - - - - - - -4 Attach the printer to the network- - - - - - - - - - - - - - - -4 Print a network setup page - - - - - - - - - - - - - - - - - - -5 Configure and print- - - - - - - - - - - - - - - - - - - - - - -5 TCP/IP - - - - - - - - - - - -
Résumé du contenu de la page N° 4
Setup Prerequisites You may have purchased a printer that has Ethernet, Token-Ring or other MarkNet internal print servers are sometimes called network ports preinstalled. If not, you should install a MarkNet™ internal print internal network adapters or server now. Refer to your printer documentation for instructions on opening INAs. the printer and plugging in the card. 1 Attach the printer to the network a Turn printer power off. Unplug the power cord. Connect only one network cable even
Résumé du contenu de la page N° 5
2 Look for the UAA (universally Print a network setup page administered address) under the Network heading on the setup page. The UAA is a Use the printer operator panel to print the network setup page. (Hint: Network 12-digit number. The left column shows the address in Menu/Network Option x/Network x Setup/Print/Print Setup Page). MSB form and the right The network setup page shows the physical address (UAA) of the MarkNet column shows the address in canonical form. print server and o
Résumé du contenu de la page N° 6
If you don’t have DHCP, there are other methods you can use to manually assign the address, such as the printer operator panel, static ARP and telnet, RARP and telnet, BOOTP, or MarkVision or other Lexmark utility. Instructions for three of these methods follow. Printer operator panel A simple way to set the IP address, netmask and gateway inside the print server is to use the printer operator panel. You need to be standing at the printer to use this method. 1 On the printer operator pa
Résumé du contenu de la page N° 7
Print server TCP/IP setup utility It doesn’t matter which form of You can use this simple utility to initialize the printer IP address if your the UAA you use (MSB or workstation is running Windows 95, Windows 98 or Windows NT and is on the canonical). same subnet as the printer. You need to know the 12-digit physical address of the print server to use this method. Information on installing, To install the utility, launch the Drivers, MarkVision and Utilities CD, do a using and troubles
Résumé du contenu de la page N° 8
3 Set up your Windows 95, Windows 98, or Windows NT clients in the usual way. (Hint: Start, Settings, Printers, Add Printer.) Point-to-point printing (LexIP) You can print from any Windows 95, Windows 98 or Windows NT workstation directly to a Lexmark printer located anywhere on the IP network. No server is required. 1 Install the TCP/IP software component on the workstation. Look on the These are the Windows 95/98 instructions. Instructions for Drivers, MarkVision and Utilities CD for t
Résumé du contenu de la page N° 9
Novell NetWare NDPS (Novell Distributed Print Services) Some versions of the Drivers, If you have MarkNet print servers in an NDPS environment, we recommend MarkVision and Utilities CD that you install the Lexmark NDPS IP Gateway. This allows your printers to be contain the Lexmark NDPS IP tightly integrated with NDPS so that you can easily monitor, control and print Gateway. To find out if your to them. CD contains the gateway, look on the CD for a subdirectory You can get the gateway p
Résumé du contenu de la page N° 10
AppleTalk The MarkNet print server works automatically with AppleTalk networks. You MarkVision for Macintosh resides on the Drivers, simply connect the power and the network cables, and you’re up and running. MarkVision and Utilities CD. However, if you would like to use a zone and printer name different from the defaults you can use MarkVision for Macintosh to change these settings. Each Macintosh user on the AppleTalk network who wants to use the printer should do the following steps. 1 I
Résumé du contenu de la page N° 11
Troubleshooting For expanded troubleshooting Free firmware updates for any Lexmark print server are available on the web information, look on the site at www.lexmark.com. Drivers, MarkVision and Utilities CD. Click View Documentation and look for the MarkNet link. TCP/IP 1 Make sure the TCP/IP protocol is turned on (activated) in the print server. To find out, print a network setup page and look in the paragraph under TCP/IP. 2 Issue a ping command to the print server. ping 192.168.236
Résumé du contenu de la page N° 12
Novell NetWare NDPS (Novell Distributed Print Services) 1 Make sure the TCP/IP protocol is turned on (activated) in the print server. To find out, print a network setup page and look in the paragraph under TCP/IP. 2 Make sure your NetWare file server has TCP/IP support configured and loaded. 3 Make sure you are running NDPS version 2.0 or later. 4 Make sure you’ve created and loaded an NDPS Manager. 5 Read the online documentation about Lexmark’s NDPS support. Look for a README file or a te
Résumé du contenu de la page N° 13
Windows NT Server 4.0 1 Make sure you are using TCP/IP for communications between the Windows server and the MarkNet print server. 2 Make sure TCP/IP is turned on (activated) in the print server. To find out, print a network setup page and look in the paragraph under TCP/IP. 3 Verify that TCP/IP is installed properly on the Windows server. (Hint: Start, Settings, Control Panel, Network, Protocols). 4 Issue a ping command to the print server. ping 192.168.236.24 5 Establish an FTP session wi
Résumé du contenu de la page N° 14
AppleTalk 1 Make sure the AppleTalk protocol is turned on (activated) in the print server. To find out, print a network setup page and look under AppleTalk. 2 Make sure the status of the MarkNet print server is “connected”. To find out, look on the network setup page for Status. 3 Do you see the printer in the Chooser? If not, restart the Macintosh workstation and look again. 4 If you still don’t see the printer in the Chooser, make sure AppleTalk is Be aware that if you’re on a non-routed n
Résumé du contenu de la page N° 15
Lexmark customer support World Wide Web www.lexmark.com CompuServe Go Lexmark Internet ftp.lexmark.com U.S. and Canada, 1-800-LEXMARK technical support and any other customer needs Lexmark phone numbers On the Drivers, MarkVision and Utilities CD, (worldwide) click Contact Lexmark, Customer Support. 15
Résumé du contenu de la page N° 16
Electronic Emission Notices Federal Communications Commission (FCC) Compliance Information Statement The MarkNet internal print server has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Class A
Résumé du contenu de la page N° 17
AVERTISSEMENT: Ce produit appartient à la classe A. Dans un environnement résidentiel, ce produit risque de provoquer des interférences radio, auquel cas l'utilisateur devra prendre les mesures adéquates. AVVERTENZA: Questo prodotto appartiene alla Classe A. In ambiente domestico, questo prodotto può causare interferenze radio, nel qual caso è necessario adottare adeguate precauzioni. WARNUNG: Bei diesem Gerät handelt es sich um ein Produkt der Klasse A. In Wohngebieten kann dieses Gerät St
Résumé du contenu de la page N° 18
18
Résumé du contenu de la page N° 19
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2000 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 www.lexmark.com
