Instruction d'utilisation Hypertec PC Card 10/100 TX

Résumé du contenu de la page N° 1

HyperNet
PC Card 10/100 TX
HYNEP51001
USER GUIDE
Information in this document is subject to change without notice.
All rights reserved. All brand names are registered trademarks of
their respective companies.

Résumé du contenu de la page N° 2

Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. European Community (EC) Electromagnetic Compatibility Directive. This equipment has been tested and found to comply with the protections requirements of European Emission Standard EN55022 and the Generic European Immunity Standard EN50082-1. This equipment is designed to operate in a domestic environment and as such is

Résumé du contenu de la page N° 3

100Mbps Ethernet networks. Features  Dual-speed 10Mbps (10BASE-T) and 100Mbps (100BASE-TX) operation  Automatic sensing and switching between 10/100Mbps operation  Super low power consumption  Full Duplex - Independent receive and transmit circuits allow for full duplex operation at both 10Mbps and 100Mbps, giving the adapter a maximum throughput of 200Mbps  Platform independent - supports all PC Card, Type II compliant PCs  Wide selection of software drivers to support all major network o

Résumé du contenu de la page N° 4

Static Electricity Warning Static electricity is accumulated naturally in the human body, and can be discharged through electrical components by touching them. This shock can potentially cause permanent internal damage to the component. When installing the adapter, please observe the following precautions: Discharge yourself before commencing by touching a grounded metal appliance, such as the metal frame of a computer - while it is tuned off, but still plugged into the wall socket. Hold the ad

Résumé du contenu de la page N° 5

3. From the Program Manager, select File Menu. (For Windows 95, select the start menu) 4. Select Run… 5. Type A:\SETUP and select OK. 6. Follow the Help utility's on-screen instructions for the setup process. DOS Installation Look at the README file. Software Included  ODI workstation drivers for Novell NetWare, NetWare Lite, Novell DOS 7 and OS2  NDIS 2.0.1 driver for Microsoft LAN Manager, Windows for Workgroups, Artisoft LANtastic, Banyan Vines, OS2 and others.  NDIS 3 for Windows 98

Résumé du contenu de la page N° 6

Length - 3.37" (85 mm) Width - 2.13" (54 mm) Thickness - 0.197" (5 mm) Power Consumption: 100BASE-TX: 260mA 10BASE-T : 190mA Operating Temperature: 0°-50°C Operating Humidity: 0% - 90% non-condensing Certifications: FCC Part 15, Subpart B class A CE Ethernet Protocols: IEEE 802.3U (Fast Ethernet, 100BASE-TX) IEEE 802.3 (Ethernet, 10BASE-T) Data Transfer Rate: 100 or 10 Mbits/sec Connector: Unshielded female RJ45 connector to be checked.

Résumé du contenu de la page N° 7

This warranty applies only to the original registered end user purchaser of the product and does not include service to repair damage resulting from accident, disaster, misuse, abuse or non-Hypertec modification of the product. Additional components installed by the dealer or end user are not covered by this warranty. Apart from the above, no warranty is expressed or implied, including warranty of merchantability or warranty of fitness for use for a particular purpose. The liability of Hypertec