Résumé du contenu de la page N° 1
BDR-203/BDC-203
Command Reference Manual
Version 1.01
Feb. 13, 2009
PIONEER CORPORATION
Pioneer Confidential
Résumé du contenu de la page N° 2
BDR-203/BDC-203 Command Reference Manual Version 0.90 1 Introduction........................................................................................................................................................................3 1.1 Change History ...........................................................................................................................................................3 2 Interface......................................................................
Résumé du contenu de la page N° 3
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.21.1 Reading Speed..................................................................................................................................................37 4.21.2 Writing Speed...................................................................................................................................................38 4.22 WRITE (10), WRITE (12) Command.....................................................................
Résumé du contenu de la page N° 4
BDR-203/BDC-203 Command Reference Manual Version 0.90 1 Introduction This document specifies a command set for BDR-203/BDC-203. (Hereinafter referred to as "drive") BDR-203 is a BD writer drive. BDC-203 is a BD combo drive. BDC-203 does not write to BD-R/RE disc. The drive fundamentally complies with SFFC INF-8090i standard. The drive complies with Information Technology Multimedia Commands-5 (MMC-5) Draft Revision 1b prior to SFFC INF-8090i standard, when a +R or a +RW disc is inserted in
Résumé du contenu de la page N° 5
BDR-203/BDC-203 Command Reference Manual Version 0.90 2 Interface The drive supports Serial ATA interface. 2.1 SATA version The drive complies with the Serial ATA Revision 2.6. The data transfer mode is General1 1.5GBits/sec. 2.2 Drive Information The data returned by INQUIRY command covers the following information. Vendor name: “PIONEER ” Product collation data: "BD-RW BDR-203" (writer) “BD-ROM BDC-203” (combo) Page 4 Pioneer Confidential
Résumé du contenu de la page N° 6
BDR-203/BDC-203 Command Reference Manual Version 0.90 3 DRIVE Descriptions 3.1 Compatible Media The drive supports reading of BD-ROM, BD-R/RE Disc, CD-ROM/-R/-RW Disc, DVD-ROM/-R/-RW/RAM/-R DL Disc and +R/+RW/+R DL Disc and writing of BD-R/RE Disc (except BDC-203), CD-R/-RW Disc, DVD-R/-RW/RAM/-R DL Disc and +R/+RW/+R DL. (Except 8cm disc with an adaptor) 3.2 Power Condition The drive is provided with 4 power conditions including active, idle, standby and sleep. The power consumption i
Résumé du contenu de la page N° 7
BDR-203/BDC-203 Command Reference Manual Version 0.90 4 Packet Commands The following commands are implemented in the drive. In case of BDC-203, the following commands are not performed for BD-R/RE; CLOSE TRACK/SESSION, FORMAT UNIT, RESERVE TRACK, SEND DISC STRUCTURE, SEND OPC INFORMATION, SYNCRONIZE CACHE, WRITE(10), WRITE(12), and WRITE AND VERIFY commands. Table 1– Packet Commands Operation Reference Command Description code SFF8090i MMC-5 This document BLANK Command A1h 17.1 6.2 4.1
Résumé du contenu de la page N° 8
BDR-203/BDC-203 Command Reference Manual Version 0.90 Operation Reference Command Description code SFF8090i MMC-5 This document WRITE AND VERIFY Command 2Eh 17.50 6.46 WRITE BUFFER Command 3Bh 17.51 6.47 4.23 Page 7 Pioneer Confidential
Résumé du contenu de la page N° 9
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.1 BLANK Command This command is valid for CD-RW and DVD-RW media. The Immed bit is supported. The READ DISC INFORMATION Command, the READ TRACK INFORMATION Command and the TEST UNIT READY Command are used to detect completion of the blank operation. While blank operation is performed by the BLANK Command that the Immed bit is set to one, the drive terminates these commands with the Check Condition status, LOGICAL UNIT NOT READY, OPER
Résumé du contenu de la page N° 10
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.3 FORMAT UNIT Command The CmpLst bit is supported only in DVD-RAM media, must be set to zero with other medias. The Interleave Value field is not supported and must be set to zero. The Format Code field allows the value of 001b and 111b. If Format Code field is set to 001b and a BD-RE/R media is mounted, the drive confirms for the definition of Blu-ray Disc(BD) Multi-Media Command Set Description. If Format Code field is set to 001b a
Résumé du contenu de la page N° 11
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.3.1.1.2 On BD-R media For BD-R, 4096 spare Clusters are allocated in ISA0 and 8192 Clusters in OSA. In addition, for BD-R Dual, 4096 spare Clusters are allocated in ISA1. TDMA1 size is 2048 Clusters and TDMA2 is 4096 Clusters. For BD-R Dual, TDMA2 is 2048 Clusters, TDMA3 is 4096 Clusters, TDMA4 is 4096 Clusters and TDMA5 is 2048 Clusters. The drive supports the following Format Sub-type: Table 7 - Format Sub-type Sub-type Descript
Résumé du contenu de la page N° 12
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.4 GET CONFIGURATION Command 4.4.1 Feature List and Profile List Supported Feature is listed to Table 10 – Feature List. Table 10 – Feature List Feature Number Feature Name 0000h Profile List 0001h Core 0002h Morphing 0003h Removable Medium 0004h Write Protect 0010h Random Readable 001Dh Multi Read 001Eh CD Read 001Fh DVD Read 0020h Random Writable 0021h Incremental Streaming Writable 0023h Formattable 0024h Hardware Defec
Résumé du contenu de la page N° 13
BDR-203/BDC-203 Command Reference Manual Version 0.90 Table 11 – Profile List Profile Number Profile Name 0002h Removable Disc 0008h CD-ROM 0009h CD-R 000Ah CD-RW 0010h DVD-ROM 0011h DVD-R Sequential Recording 0012h DVD-RAM 0013h DVD-RW Restricted Overwrite 0014h DVD-RW Sequential Recording 0015h DVD-R Dual Layer Sequential Recording 0016h DVD-R Dual Layer Jump Recording 001Ah +RW 001Bh +R 002Bh +R Double Layer 0040h BD-ROM 0041h BD-R SRM 0042h BD-R RRM 0043h BD-RE The +RW p
Résumé du contenu de la page N° 14
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.4.2 Media states The Morphing is occurred when the media or media state is changed. The drive has Media states that is described in the Table 12 – Media states. Table 12 – Media states State No Media State Descriptions 1 No Media Not Ready 2 CD-ROM Complete 3-1 Empty Empty Disc 3-2 No Complete Session No Session closed Disc (Track at Once or Packet writing disc) CD-R Session closed Disc (Session at Once writing or Session clos
Résumé du contenu de la page N° 15
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.4.3 Current Profile of the Feature Header and Current bit of the Profile List The Current Profile of the Feature Header and the Current bit of the Profile List is set as following. The Current Profile and Current bit of Profile List is morphed by media state. 4.4.3.1 Current Profile and Current bit for No Media and CD Media The following table indicates the Current Profile of the Feature Header and the Current bit of the Profile List
Résumé du contenu de la page N° 16
BDR-203/BDC-203 Command Reference Manual Version 0.90 Table 14 – Current Profile and Current bit for DVD Media Current bit of the Profile State Current descriptions No Profile DVD-ROM Profile is current to indicate the 5 0010h 0 1 0 0 0 0 0 0 read only. 0011h DVD-R Sequential Recording Profile is 6-1 0 0 1 0 0 0 0 0 *a current to indicate the sequential writable. 0011h DVD-R Sequential Recording Profile is 6-2 0 0 1 0 0 0 0 0 *b current to indicate the sequential writable. DVD-RO
Résumé du contenu de la page N° 17
BDR-203/BDC-203 Command Reference Manual Version 0.90 The other Current bits are all 0. 4.4.3.3 Current Profile and Current bit for +R/+RW/+R DL Media The following table indicates the Current Profile of the Feature Header and the Current bit of the Profile List that +R/+RW/+R DL media is mounted. Table 15 – Current Profile and Current bit for +R/+RW/+R DL Media Current bit of the Profile State Current descriptions No Profile 8-1 0 1 0 8-2 0 1 0 001Bh Only DVD+R Profile is curren
Résumé du contenu de la page N° 18
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.4.4 Current bit of the Feature List 4.4.4.1 Current bit of the Feature List for CD Media The Current bit of the Feature List for CD media is set as Table 17 – Feature List for CD Media. The State No. is described in theTable 12 – Media states. Table 17 – Feature List for CD Media State No. 1 2 3-13-23-33-44-14-24-34-44-5 Feature Name 0000h: Profile List 1 111111 1111 0001h: Core 1 111111 1111 0002h: Morphing 1 111111 1111 000
Résumé du contenu de la page N° 19
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.4.4.2 Current bit of the Feature List for DVD Media The Current bit of the Feature List for DVD media is set as Table 18 – Feature List for DVD-ROM/-R/-RW/RAM Media. The State No. is described in the Table 12 – Media states. Table 18 – Feature List for DVD-ROM/-R/-RW/RAM Media 1 5 6-1 6-2 6-3 6-4 7-1 7-2 7-3 7-4 7-5 10 12- 12- 12- 12- 12- 12- State No. 1 2 3 4 5 6 Feature Name 0000h: Profile List 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Résumé du contenu de la page N° 20
BDR-203/BDC-203 Command Reference Manual Version 0.90 4.4.4.3 Current bit of the Feature List for +R/+RW/+R DL Media The Current bit of the Feature List for +R/+RW/+R DL media is set as Table 19 – Feature List for +R/+RW/+R DL Media. The State No. is described in the Table 12 – Media states. Table 19 – Feature List for +R/+RW/+R DL Media 1 8-1 8-2 8-3 8-4 9-1 9-2 9-3 11 11 11 11 State No. -1 -2 -3 -4 Feature Name 0000h: Profile List 1 1 1 1 1 1 1 1 1 1 1 1 0001h: Core 1 1 1 1 1 1 1
