Résumé du contenu de la page N° 1
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP
ACT-IR100M+/100M/100MP
IrDA IR Printer Adapter
User’s Manual
I
ACTiSYS Corp.
48511 Warm Springs Blvd, Suite 206
Fremont, CA 94539, USA
TEL: (510) 490-8024, FAX: (510) 623-7268
E-Mail: irda-support@actisys.com
Web: www.actisys.com
Release 3.2, August 20, 2003 1
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Résumé du contenu de la page N° 2
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING-FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manuf
Résumé du contenu de la page N° 3
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IMPORTANT – COMPATIBILITY We appreciate all of our honorable users of this product will read this compatibility list carefully. Known Compatible Printer Model List HP LaserJet: 5P, 5MP, 4L, 5L HP DeskJet: 648C, 842C, 932C, 935C, 952C, 960Cse, 970Cse CANON 4300, 4400, S400, S600 EPSON Stylus Color Series: 440, 670, 760, 777, 777I, 780, 880, 880I, 980 EPSON Stylus Photo 2000P Brothe
Résumé du contenu de la page N° 4
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TABLE OF CONTENTS 1 INTRODUCTION ...............................................................................................................................................5 2 PARTS CHECK LIST ........................................................................................................................................9 3 SYSTEM REQUIREMENTS.....................................................................................
Résumé du contenu de la page N° 5
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 1 INTRODUCTION The ACT-IR100M+ is the only Two-in-One IrDA parallel printer adapter that allows a mobile device to print directly via infrared. A mobile device user can print out via infrared port and he can also print out via parallel port from desktop PC. ACT-IR100M+ consists of a detachable serial IrDA adapter ACT-IR220L+ and a parallel adapter ACT-IR100MB. You can use the serial IrDA adapter ACT-IR220L+
Résumé du contenu de la page N° 6
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 1: ACT-IR100M+ ACT-IR100M+ LED Status Definition Name Status Meanings Off Before Detecting IR Device LED Flash Slowly IR Signal Detected On IR Communicating Release 3.2, August 20, 2003 6 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Résumé du contenu de la page N° 7
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 2: ACT-IR100M ACT-IR100M LEDs Definition Name Status Meanings Infrared LED (green) Flash Stand-by for transmission Parallel LED (green) On or Flashes fast Printing through the infrared port Power LED (red) On Power on Release 3.2, August 20, 2003 7 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Résumé du contenu de la page N° 8
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 3: ACT-IR100MP ACT-IR100MP LED Status Definition Name Status Meanings Off Before Detecting IR Device LED Flash Slowly IR Signal Detected On IR Communicating Release 3.2, August 20, 2003 8 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Résumé du contenu de la page N° 9
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 2 PARTS CHECK LIST When you unpack the package, the following items should be found. 1. ACT-IR100MB or ACT-IR100M or ACT-IR100MP 2. ACT-IR220L+ only for ACT-IR100M+ 3. 7.5V AC Adapter, inside positive if ACT-IR100MB or ACT-IR100M 4. Microsoft Windows 95 Infrared Communication Driver, Version 2.0. This is ONLY for Windows 95. DON’T use it if your computer is not Windows 95. 5. User’s Guide Release 3.2, August 20, 2003 9 © Co
Résumé du contenu de la page N° 10
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 3 SYSTEM REQUIREMENTS To use ACT-IR100M+/IR100M/IR100MP, you MUST meet the following requirements. Your PC which using passing through: • A Centronics parallel port. • A cable connecting your PC Centronics port and IR100M+/IR100M/IR100MP Centronics 36F port. • A printer which is within ACTiSYS IR100M+/IR100M/IR100MP compatibility list. • Proper printing software and proper printer driver on your PC. • Window 95/98/ME/2000/XP.
Résumé du contenu de la page N° 11
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 4 SETUP Figure 3: Connection Diagram with Passing Thru Figure 4: Connection Diagram without Passing Thru Release 3.2, August 20, 2003 11 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
Résumé du contenu de la page N° 12
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 5. Align Diagram Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through function) 1. Turn Off both your computer and printer. 2. Connect ACT-IR220L+ to ACT-IR100M+ only if you have IR100M+. 3. Connect your printer and ACT-IR100M+/IR100M/IR100MP. 4. Connect your ACT-IR100M+/IR100M/IR100MP and PC by printer cable ( If you use the pass through function) 5. Plug the AC adapter to the electrical outle
Résumé du contenu de la page N° 13
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 5 TROUBLESHOOTING AND COMPATIBLE PRINTERS LIST For help on general and miscellaneous problems you may be experiencing with your printing, refer to the following pages for possible solutions. Look up your problem and try the solution. Note: Checking if your printer is on the IR-100M+/IR100M/IR100MP compatibility list first. If not, contact Actisys technical support. ACT-IR100MP Trouble Shooting Table Problem Solution When I t
Résumé du contenu de la page N° 14
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M Trouble Shooting Table IF your IR100M version is v2.2 or below, you MUST follow the power sequence. Problem Solution The power LED is not on. 1 Be sure there is 110V AC power supply to your wall outlet. 2 Be sure AC adapter is firmly plugged in the wall outlet. 3 Be sure AC adapter’s output is 7.5V ~ 12V inside positive. 4 Be sure AC adapter is firmly attached to IR100M. When I try to print from my 1 Be sure the cable betw
Résumé du contenu de la page N° 15
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 6 SPECIFICATIONS Model: ACT-IR100M+/100M/100MP Carrier: Infrared radiation (peak wavelength: 850 to 1050 nm) IrDA SIR Transmission Speed: 9.6, 19.2, 38.4, 57.6, 115.2K bps Parity Bit: None Data: 8 bit Stop Bit: 1 bit Error Check: CRC Parallel Interface: Centronics 36F/36M Cable to Parallel Printer. DB 25M/Centronics 36M Cable to PC Parallel Port. Serial Interface: (IR100M+ only) DB9 Male Connector on IR100MB DB
Résumé du contenu de la page N° 16
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 7 WARRANTY INFOMATION THE FOLLOWING WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. ACTiSYS Corporation warrants to the first consumer purchaser, for a period of one year from the date of purchase, that this wireless interface (“the Product”) will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the de
Résumé du contenu de la page N° 17
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACTiSYS Corporation warrants to the first consumer purchaser, for a period of 1 year from the date of purchase, that this wireless interface (The Product? Will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof at no charge to the purchaser for parts or for labor. This warranty does not apply to any appearance items of t
Résumé du contenu de la page N° 18
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 8 CONTACT INFORMATION ACTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com Web: www.actisys.com Release 3.2, August 20, 2003 18 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved
