Instruction d'utilisation Cisco Systems 400

Résumé du contenu de la page N° 1

SERIES
Quick Start Guide
FASTHUB 400 10/100 SERIES
CABLING AND START U P
1
TAKE OUT WHAT YOU NEED
2
CONNECT THE HUB TO OTHER NETWORK DEVICES
3
ASSIGN IP INFORMATION TO THE HUB
4
DISPLAY THE WEB-BASED HUB MANAGER

Résumé du contenu de la page N° 2

Installation Configuration Guide Quick Start Guide 10BaseT/100BaseTx RPS 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x 24x 24 10 10 10BaseT/100BaseTx MODE RP00 S 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 12 MODE 0 10 1 Take Out What You Need FastHub 400 10/100 series hub (12- or 24-port model) FastHub 400 10/100 Series Installation and Configuration Guide RJ-45-to-RJ-45 rollover console cable (FastHub 412M and FastHub 424M models only) RJ-45-to-DB-9 console-to

Résumé du contenu de la page N° 3

10BaseT/100BaseTx RPS 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x 24x 24 10 100 MODE Connect the Hub to Other Network Devices 10BaseT/100BaseTX network port (RJ-45) Maximum cable length: 328 ft (100 m) 10BaseT or 100BaseTX port (RJ-45) Ethernet cable (not supplied) 2 Note: Use a straight-through cable to Connect the Hub to Switches connect two ports when one of the ports is and Other Hubs designated with an X. Use a crossover cable � Connect a Categor

Résumé du contenu de la page N° 4

DC INPUTS FOR REMOTE POWER SUPPLY UP SPECIFIED IN MANUAL +5V @6A, +12V @1A RATING CONSOLE 100-127 / 200-240 V~ DC INPUT 2A /1A 50 / 60 Hz 10/100 BASE-TX DOWN STAT DUP 100 MEDIA MODULE DC INPUTS FOR REMOTE POWER SUPPLY 10/100 BASE-TX SPECIFIED IN MANUAL UP +5V @6A, +12V @1A STAT DUP 100 RATING CONSOLE DC INPUT 100-127 / 200-240 V~ 2A /1A 50 / 60 Hz DOWN MEDIA MODULE DC INPUTS FOR REMOTE 100 BASE-FX POWER SUPPLY UP SPECIFIED IN MANUAL +5V @6A, +12V @1A RATING CONSOLE LI

Résumé du contenu de la page N° 5

DC INPUTS FOR REMOTE 10/100 BASE-TX POWER SUPPLY SPECIFIED IN MANUAL UP +5V @6A, +12V @1A RATING CONSOLE STAT DUP 100 100-127 / 200-240 V~ DC INPUT 2A /1A 50 / 60 Hz DOWN MEDIA MODULE Connect the Hub to Other Network Devices (continued) Console port (RJ-45) Power outlet RJ-45-to-RJ-45 rollover console cable (supplied) RJ-45-to-DB-9 adapter (supplied) 4 (Optional) Connect the Power Up the Hub Console Cable Connect one end of the power cord to 1 the hub and the other end to a power Ma

Résumé du contenu de la page N° 6

(Optional) Assign IP Information to the Hub The hub is designed to operate with little or Enter the IP address of the default 4 no user intervention. In most cases, you can gateway (for example: 10.1.105.254): use it with its default settings. Enter IP default gateway: 10.1.105.254 Assign IP information to the FastHub 400M The following information is displayed: model so that you can use the FastHub 400 The following configuration command series Hub Manager web-based interface script was cr

Résumé du contenu de la page N° 7

(Optional) Display the FastHub 400 Series Hub Manager If you have the IP address to the hub, you can display the FastHub 400 series Hub Manager from your intranet. You can use the FastHub 400 series Hub Manager to configure and monitor the hub. Start Netscape Communicator (4.03 or higher) or Microsoft Internet Explorer 1 (4.01 or higher). Make sure that Java and JavaScript are enabled. Enter the IP address of the hub in the URL field if you are using Communicator 2 (the Address field if you

Résumé du contenu de la page N° 8

Corporate Headquarters European Headquarters Americas Asia Headquarters Cisco Systems, Inc. Cisco Systems Europe s.a.r.l. Headquarters Nihon Cisco Systems K.K. 170 West Tasman Drive Parc Evolic, Batiment L1/L2 Cisco Systems, Inc. Fuji Building, 9th Floor San Jose, CA 95134-1706 16 Avenue du Quebec 170 West Tasman Drive 3-2-3 Marunouchi USA Villebon, BP 706 San Jose, CA 95134-1706 Chiyoda-ku, Tokyo 100 http://www.cisco.com 91961 Courtaboeuf Cedex USA Japan Tel: 408 526-4000 France http://www.cisc