Résumé du contenu de la page N° 1
S SM MX X..5 50 01 1
PROFESSIONAL DJ MIXER
OWNER’S MANUAL
STANTON MAGNETICS, INC
information@stantondj.com • 954.689.8833
www .stantondj.com
Résumé du contenu de la page N° 2
WELCOME! Thank you for making Stanton your first choice in professional DJ mixers. Our innovative family of mixers has been developed with input from the profes- sional DJ community. Stanton offers an affordable combination of user-friendly mixers with functional design, rugged construction and professional quality fea- tures which had been previously unavailable. Stanton and your authorized Stanton dealer are dedicated to your complete sat- isfaction by offering benchmark service and support th
Résumé du contenu de la page N° 3
PLEASE READ CAREFULLY BEFORE USE FAILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MAY VOID WARRANTY • Follow all security advice printed on your mixer • When removing the unit's AC plug from the power source, grasp and pull the plug, NEVER the cord itself! • Avoid placing your mixer near heat sources, such as power amplifiers. • When in use, place your mixer on a stable surface, away from vibration. Always use care when carrying your mixer. Impact, or heavy vibration may compromise the unit
Résumé du contenu de la page N° 4
SMX.501 FEATURES This hybrid 3-Channel, "Techno / Scratch" mixer will appeal to both Turntablist and Club/Rave DJs alike. Nowhere else can DJs find so many features included with the design of a battle mixer. The SMX.501 is a "one of a kind" mixer that combines the best of both worlds and bridges the gap between Battle & Club DJs. • 3-channel scratch mixer • Assign effects loop to each individual channel, plus the mic • Custom High Quality P&G (Penny & Giles) Crossfader with VCA curve adjustmen
Résumé du contenu de la page N° 5
DESCRIPTION OF FUNCTIONS
Résumé du contenu de la page N° 6
DESCRIPTION OF FUNCTIONS CHANNEL STRIPS GAIN Controls the input level of each channel. An LED meter is provid- ed on each of the 3 channels. HI, MID, LOW (EQ) Individual controls for high frequency, midrange, and low fre- quency equalization with +9dB/Kill adjustments. Note: Any changes made to EQ settings will change the overall output level. CURVE The Line Fader Curve Control adjusts the curve of the input faders between short, mid, or long fade. PAN Controls left/right output balance of each
Résumé du contenu de la page N° 7
DESCRIPTION OF FUNCTIONS MASTER SECTION MASTER Controls the overall output level of the mixer. SEND RETURN Send and Return levels are used to control the volume of the external effects unit connected to the SMX.501 using the effects loop. SEND is the level of the signal sent to the effect unit, and RETURN is the level of the processed signal returning from the the effects unit. BOOTH LEVEL Controls the output level for the booth output. This is basically a 2nd output. It is usually used for mon
Résumé du contenu de la page N° 8
DESCRIPTION OF FUNCTIONS MICROPHONE SECTION MIC 1 Controls the input level of Microphone input 1. MIC 2 Controls the input level of Microphone input 2. HI, MID, LOW (EQ) Individual controls for high frequency, midrange, and low fre- quency equalization with +9dB/Kill adjustments. The EQ controls both Microphone inputs. Note: Any changes made to EQ settings will change the overall output level. FX This is an ON/OFF switch for the effects loop. The level is con- trolled by the Send and Return kno
Résumé du contenu de la page N° 9
FADER CLEANING AND REPLACEMENT After constant use the SMX.501 faders may need to be cleaned and lubricated from time to time. This will ensure long life and keep a smooth feeling through- out the fader's lifetime. Follow the instructions below to lubricate and clean your faders: Removing a fader: 1. Make sure mixer is powered off and power supply is disconnected from back of mixer. 2. To remove the Protekt Panel, take off the 4 main fader knobs and then remove the 4 screws located at the corner
Résumé du contenu de la page N° 10
DESCRIPTION OF FUNCTIONS affect the operation of the fader. Clean C B the slider assembly by gently wip- ing the wiper contacts and slider F A bearings (E) using a tissue or cot- ton bud. If slider bearings are E excessively worn, as indicated by G D excessive slider rocking then con- tact Stanton for replacement. 3. Remove the single upper screw on the opposite end block to remove the guide rail. Clean the guide rail (F) with a tissue or cloth, removing all traces of dirt and contamination. G 4
Résumé du contenu de la page N° 11
TECHNICAL SPECIFICATIONS Line inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm Phono inputs: 2 (RCA) x 3 channels, -50 dBV / 47 kOhm Mic inputs: 2 (1/4") -50 dBV /100 kOhm Return inputs: 2 (1/4"), -10 dBV / 10 kOhm Send output: 2 (1/4"), -10 dBV Master output: 2 (XLR Balanced/RCA unbalanced), +4 dBu balanced / -10 dBV unbalanced Record output: 2 (RCA), -10 dBV / 100 Ohms Booth output: 2 (RCA), -10 dBV / 100 Ohms Headphone output: 1 (1/4 inch), greater than 32 Ohm load Frequency Response: 20 Hz -
Résumé du contenu de la page N° 12
WARRANTY Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) following the date of original purchase.
