Résumé du contenu de la page N° 1
Professional Disc Jockey Products
DM1295 DM1295 DM1295 DM1295
PROFESSIONAL DJ SAMPLING MIXER PROFESSIONAL DJ SAMPLING MIXER PROFESSIONAL DJ SAMPLING MIXER PROFESSIONAL DJ SAMPLING MIXER
Owner’s Manual
©2000 Industries http://www.numark.com
Résumé du contenu de la page N° 2
DM1295 Safety Information h) Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. i) Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord. j) Object and Liquid Entry - Take
Résumé du contenu de la page N° 3
DM1295 DM1295 DM1295 DM1295 DM1295 PROFESSIONAL DJ MIXER with onboard sampler with onboard sampler with onboard sampler with onboard sampler CONGRATULATIONS! You have purchased the DM1295 stereo preamp mixer with onboard sampler. Numark’s engineers have designed this mixer to accommodate both the mobile DJ market and the professional installation market. The DM1295 provides the end user with high-end audio circuitry combined with maximum versatility to meet the demands of every intende
Résumé du contenu de la page N° 4
DM1295 MIXER FEATURES 22 23 21 19 20 INPUTS 1. Input Toggle Switches - select which source will be live to that 8. Treble and Bass Controls – for fine-tuning the tone of your channel based on what you have connected to the rear panel voice through the sound system. The controls are detented for input section. setting tone "flat". 2. Input faders - control individual source levels in the mix. 9. DJ Mic Gain Control – for volume adjustment of the Note: Never use spray cleaners on the slide control
Résumé du contenu de la page N° 5
DM1295 HEADPHONE CUEING EQUALIZER SECTION 18. Headphone Mix - controls the mix of cue and program (- the 16. 6-Band Stereo Graphic Equalizer (EQ). EQ final mix of music played through the master output), signals to compensates for differences in source material sound your headphones. When the knob is moved to the left, all you quality. In ultra-compact mobile systems this EQ can be will hear is the cue source. When the knob is all the way to the used to tailor the sound to the acoustical requir
Résumé du contenu de la page N° 6
DM1295 - The Leader in DJ Technology ©2000 Industries - 6 - http://www.numark.com
Résumé du contenu de la page N° 7
DM1295 SAMPLER OPERATION 2 1 3 4 5 6 This sampler was designed for ease of use and understanding. It can retain in memory up to 110 seconds worth of sampling. Each bank can save 27.5 seconds for playback even after the unit is shut down. It’s as simple as (1) pressing a channel send (2) recording the sample (3) playing it back. Enjoy a whole new way to sample. 1. Output Gain Control – adjusts the volume of the sampler. 2. Pitch Adjust – changes the playback pitch of the sample. Moving left
Résumé du contenu de la page N° 8
DM1295 REAR PANEL FEATURES 1. Power Connector. Plug in power cord here and check the 8. Line/Phono Input switch. Use this to allow line level voltage level to match your country’s standard. equipment to be plugged into your phono inputs giving you a total of 8 line input options. 2. GND is the grounding lug for turntables 1, 2 and 3 (phono inputs on Channels 1, 2 and 3). Always use this 9. Phono Inputs on Channels 1, 2 and 3 use unbalanced connection (your turntable cable should have a grounding
Résumé du contenu de la page N° 9
DM1295 QUICK SETUP DIAGRAM VERY IMPORTANT: Please read this entire manual before connecting this unit to your system For optimum performance: • Always make sure that AC power is OFF while making any connections. • Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittence that could easily damage your speakers. Make the input and output connections with
Résumé du contenu de la page N° 10
DM1295 SPECIFICATIONS INPUTS: Line: 10Kohm input impedance 110mV rms sensitivity (for 1.22V output) Mic: 10Kohm input impedance unbalanced 1.6 mV rms sensitivity (for 1.22V output) 500mV rms max input Talkover attenuation: variable from no cut to -16 dB Phono: 47Kohm input impedance 1.8mV rms sensitivity @ 1 KHz (for 1.22V output) OUTPUTS: Line: 9V rms max Headphone Amp: 1V rms watt into 16ohm Distortion: less than 0.01% SIGNAL TO NOISE RATIOS* (vs. maximum output): Line: Better than 96 dB Mic:
Résumé du contenu de la page N° 11
DM1295 BLOCK DIAGRAM - The Leader in DJ Technology ©2000 Industries - 11 - http://www.numark.com
Résumé du contenu de la page N° 12
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK products; including but not limited to DJ mixers, amplifiers, CD players, CD Mix Stations, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, cartridges, and all other accessories; are to be free from defects in material and workmanship under normal use and service for the period commencing upon t
