Résumé du contenu de la page N° 1
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM
HDS-16
HRM-16
HEADPHONE/AUDIO DISTRIBUTION
AND REMOTE MIXING SYSTEM
MONITORING
SERIES
Résumé du contenu de la page N° 2
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM INTRODUCTION The HDS-16/HRM-16 Headphone/Audio FEATURES Distribution System is the latest addition The HDS-16 accepts eight mono and four stereo inputs from a mixing console and routes them to each HRM-16 via a 50-pin Centron- to the Furman Sound headphone/audio ics cable. This cable also transports the DC power to each HRM-16 so they do not require distribution product line. The HDS-16 a power cable or “wall wart.” Each HDS-16 has six Centron
Résumé du contenu de la page N° 3
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM matically mute all HRM-16 sends except the normally located near the main mixing console, channel D stereo and talkback outputs. This provides the power and signal conditioning unique feature allows each musician to hear a for a maximum of eight HRM-16’s. Individual rough or fi nal mix and send soloed tracks from channel sends from the console connect to the the mix console. This eliminates the need for HDS-16 inputs. musicians to relocate to
Résumé du contenu de la page N° 4
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM 16’s. Talkback is always available from the mix There are two talkback modes designed for console and the level can be adjusted with the live and studio situations: HRM-16’s TALKBACK VOLUME control. LIVE/STAGE MODE (DEFAULT) This mode establishes communication from the HDS-16 to all HRM-16’s but not between them. Each HRM-16 user must depress their TALK button or switch to speak with the HDS-16 but can always receive from it. The HRM-16 users wi
Résumé du contenu de la page N° 5
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM Figure 3: Changing the talkback mode inside the HDS-16 4
Résumé du contenu de la page N° 6
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM level controls. The HDS-16 solo feature re- CHANGING THE TALKBACK MODE quires patching the mix console’s main or mix A jumper located inside the HDS-16 selects output to the HDS-16’s channel D input. between two talkback modes. Note: After using the solo feature to listen to 1. Use a a Phillips screwdriver to unscrew the the main console mix between takes, turn the middle two screws located near the top of the channel D level control off (to 0)
Résumé du contenu de la page N° 7
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM Note: The remote and front panel switches is 200 ft. See Table 1 on page 8 for information are wired in parallel. Although either switch about cable losses beyond 100 ft. can activate the SOLO function, both must Push the AC-power switch up to the ON posi- be in the off position to deactivate it. tion to power the HDS-16. REAR PANEL The GROUND lift switch has two positions: The HDS-16 rear panel has six, 50-pin, Cen- LIFT: Signal ground is separate
Résumé du contenu de la page N° 8
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM ■ TALKBACK VOLUME control, TALK button, HRM-16 and built-in microphone; REMOTE MIXER ■ EFFECTS RETURN level control. TALKBACK The HRM-16s receive their input signals and power supply entirely through the Centronics Press the TALK button and speak in the direc- cable from the HDS-16. Eight mono and four tion of the built-in microphone above the button stereo channels can be mixed and monitored (three small holes in the shape of a triangle). with hea
Résumé du contenu de la page N° 9
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM INPUT FROM HDS-16 Headphone Power Loss per This connector delivers the input signals and Impedance 100 feet of Cable power supply from the HDS-16 (parallel) or from another HRM-16’s OUTPUT TO ADDI- TIONAL HRM-16’s connector (series). -0.34 dB 32 693 mW vs. 750 mW The remaining rear panel inputs and outputs are ¼-inch TRS connectors. -0.16 dB 100 � ■ EFFECTS SEND: Connect this mono output to 746 mW vs. 770 mW an effects processor. 60
Résumé du contenu de la page N° 10
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM PLIED WARRANTIES OF MERCHANTABILITY THREE YEAR AND FITNESS FOR A PARTICULAR PUR- LIMITED WARRANTY POSE. Manufacturer does not warrant against Furman Sound, Inc., having its principal place damages or defects arising out of improper of business at 1997 South McDowell Blvd., or abnormal use of handling of the Product; Petaluma, CA 94954 (“Manufacturer”) warrants against defects or damages arising from im- its HDS-16/HR-16 (the “Product”) as fol
Résumé du contenu de la page N° 11
HDS-16/HRM-16 HEADPHONE DISTRIBUTION SYSTEM SERVICE HDS-16 SPECIFICATIONS Before returning any equipment for repair, INPUTS please be sure that it is adequately packed Balanced, 50 kΩ, 90 dB CMRR and cushioned against damage in shipment, INPUT IMPEDANCE and that it is insured. We suggest that you 50 kΩ save the original packaging and use it to ship LINE OUTPUTS Balanced or singled ended, 50 Ω, 68 dB OCMR the product for servicing. Also, please enclose a note giving your name, address, phone
Résumé du contenu de la page N° 12
Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com E-mail: info@furmansound.com Made in China 0014 960138-2743 B
