Instruction d'utilisation Dynacord Compact Mixing System

Résumé du contenu de la page N° 1

English

Résumé du contenu de la page N° 2

In a world of over-abundance and mass production quality, unrealistic for many, and the complexity and time involved with set up functionality and design are still decisive factors. We at and cabling is unmanageable for most. DYNACORD develop and produce best-in-class products (‘Made in Germany’) that provide only positive experiences The new CMS 1000 / CMS 1600 / CMS 2200 Compact Mixing for our users, bringing them many years of pleasure in day- Systems from DYNACORD are conceived as all-in-one

Résumé du contenu de la page N° 3

The discrete microphone preamps in the input channels offering audio quality of the very finest, a 60 dB gain range, and extremely low levels of noise and THD, set new standards in professional mixing equipment, whilst phantom power (switchable in groups of six channels), 3-band semi-parametric EQs with sweepable mids, 4 Aux Sends, PFL and Mute, dust-protected ALPS faders, 2 x 7-band graphic EQs, two feedback filters and four stereo line channels are only a few of the professional features. Two

Résumé du contenu de la page N° 4

All 6 / 12 / 18 (respectively) mic inputs of the CMS 1000 / CMS 1600 / CMS 2200 are equipped with XLR- (Mic) and jack (Line) sockets as well as a common Gain control with a range of 60 dB. This makes it possible to introduce even line level signals through the XLR Mic inputs. A channel break allows you to connect additional devices, such as compressors and gates, on a channel-by-channel basis using the Insert sockets. A switchable Lo Cut filter permits the elimination of low-frequency noise in t

Résumé du contenu de la page N° 5

If there is no need for EQ in the master section for the main system or room equalization, the integrated 2 x 7-band graphic equalizer can be looped into the monitor busses at the push of a button, making it available to AUX 3 and AUX 4 for the provision of an opti- mized foldback mix. LEDs indicate clearly the current selection. AUX 3 and AUX 4 are equipped with a switchable Anti-Feedback filter in the master, offering continuous control from 80 Hz to 7.7 kHz. In the event that less-than-ideal

Résumé du contenu de la page N° 6

Compact Mixing System CMS 1000 / D12 D12 CMS 1600 and Powered Speaker AM12 (Aux 3) System D-LITE 2000. Typical configuration for Entertainer and smaller Live Bands but alt- hough, in the best way suitable for fixed installation in schools, restau- rants or pubs. CMS1000 / CMS1600 PowerSub315 Compact Mixing System CMS 1000 / D12-3 D12-3 AM12 CMS 2200 with D-Lite speaker (Aux3) components driven by light weight LX 2200 power amplifiers in active 2-way mode. M15 (Aux4) Complete system dedicated for

Résumé du contenu de la page N° 7

Compact Mixing System CMS 1600 / Fx12 Fx12 2 x Fx20 2 x Fx20 CMS 2200 and Sound Reinforce- M15 ment System Xa-2. (Aux4) Complete setup for typical Top-40 Bands and medium sized events, M15 (Mono) but fits although perfect for perma- M15 (Aux3) nent installation in theatres, clubs and larger pubs suitably. CMS1600 / CMS2200 2 x Xa4000 A stable, latching metal lid is provided for the safe transportation of the device, precluding the need for a flight case, whilst the panel running the width of the

Résumé du contenu de la page N° 8

CMS 1000 CMS 1600 CMS 2200 Channels (Mono + Stereo) 6 + 4 12 + 4 18 + 4 Power Consumption max. 60 W max. 70 W max. 80 W Dimensions, (WxHxD), mm 510.5x138x484.7 669.5x138x484.7 828.5x138x484.7 Weight 9.2 kg 11.9 kg 14,6 kg MIC Gain (Mono) 0 dB … +60 dB MIC Gain (Stereo) 10 dB … +60 dB Stereo Line Trim -10dB … +20dB THD+N at 1kHz, MBW=80kHz MIC input to Main L/R output, +16 dBu, typical < 0.005% Frequency Response, -3dB ref. 1kHz Any input to any Mixer output 15Hz … 55kHz Crosstalk, 1kHz Fader and