Instruction d'utilisation Tascam DR-680

Résumé du contenu de la page N° 1

Owner's Manual Addendum

DR-680
Connecting a mid-side microphone
Added functions
When using this unit's mid-side decoding function,
The following functions have been added with
connect the mid signal to the odd channel and the
firmware version 1.20.
side signal to the even channel in the pair. If you
1 Mid-side (MS) microphone decoding mode
connect them in reverse, correct decoding is not
2 GANG function
possible.
For example, connect the mid signal to channel 3
and the side signal t

Résumé du contenu de la page N° 2

Owner's Manual Addendum DR-680 If you press and hold the VALUE dial while multiple Use the VALUE dial to adjust the signal level channels are selected, the parameter values for all of suitably in a 0–100 range. The lower the the ganged channels will be set to the lowest value number is, the lower the output level becomes of the channels. 100 (default value: ). NOTE A take that was recorded without decoding (mid • and side channels recorded as is) can also be decoded during playb