Résumé du contenu de la page N° 1
Slurples
Slushie Drink Maker
Instruction Booklet
SL4600
Please read these
instructions carefully
and retain for future
reference.
Résumé du contenu de la page N° 2
Contents Sunbeam’s Safety Precautions 1 Features of your Sluples slushie drink maker 2 Assembly Instructions 4 Using your Slurples 5 Dispensing your slushie drink 6 Slushie drink suggestions and tips 7 Care and Cleaning 8 Important instructions – retain for future use.
Résumé du contenu de la page N° 3
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR SLURPLES THE SLUSHIE DRINK MAKER. • This appliance is not a toy. • Do not place any part of this appliance in a • Operate the slushie drink maker on a flat dishwasher. surface. • Do not add more than the recommended • Do not leave your slushie drink maker amount of salt. unattended. • Do not place ice canister in freezer. Sunbeam are very safety conscious when • Young children should be supervised to ensure designing and manufacturing co
Résumé du contenu de la page N° 4
Features of your Slurples slushie drink maker Salt dispensing cap Used for measuring salt and adding salt. Jug Dispensing tap Turn the dispensing tap when your slushie drink is ready to serve. Removable drip tray Catches any drips and is removed for easy cleaning. 2
Résumé du contenu de la page N° 5
Lid Ice canister Ice and salt go into the ice canister to make Slurples super cold, super fast! Slushie paddles Power switch On/Off/Dispense. 3
Résumé du contenu de la page N° 6
Assembly Instructions 1. Before using your Slurples for the first time ensure that all packing material is removed. 2. Wash all parts in warm soapy water, rinse well and dry. 3. Place the base on a level benchtop. Place the Slurples jug on top of the motor base and ensure that it sits firmly in place with the dispensing tap over the drink tray. Figure 1. Figure 2 5. Clip in the locking latches on the inner ice paddles into the outer slushie paddles. Figure 3. Figure 1 4. Insert the ice
Résumé du contenu de la page N° 7
Using your Slurples 1.Turn Slurples to the ‘off’ setting on the 7.Add another 8 -10 standard size ice cubes side switch. through the lid opening until the ice reaches the maximum fill indictor disk on 2.Plug the unit into a 230 -240 volt AC the inside of the canister, then add another power outlet and switch the power on. capful of rock salt. 3.Secure the lid on to the Slushie jug. Important: Do not overfill above the Place the front end on first, then secure maximum fill indictor disk
Résumé du contenu de la page N° 8
Dispensing your Slushie drink 1. When peaks form in the slushie mixture, adjacent to the paddles the mixture has reached a good consistency. 2. Turn the side switch setting to the ‘Dispense’ setting to serve the slushie drink. This will reverse the paddle direction. 3. Place a glass underneath the dispensing tap and turn to the ‘pour’ position. 4. The slushie mixture will dispense from the tap into your glass. 5. To turn the dispenser off and to stop the flow, turn the tap counter clock
Résumé du contenu de la page N° 9
Slushie drink suggestions • All drinks should be chilled before adding to Slurples. • Soft drinks work best in Slurples. • Use you favourite cordial in Slurples. We recommend using more than the suggested concentrate amount when mixing with water as when cordial freezes, the flavour is not as concentrated. • Fruit juice drink drinks can be used in Slurples. 100% fruit juice is not suitable as it will freeze the paddles to the canister. We recommend using fruit juice drinks which are 35
Résumé du contenu de la page N° 10
Care and Cleaning 1. Set the side switch to the ‘off’ position and remove the plug from the power point. 2. Remove lid from the Slurples jug. 3. Remove the ice canister from the jug and discard any remaining ice and salt. 4. Carefully lift the locking latches from the ice paddles and disassemble the inner and out paddles from the canister. 5. Place the ice canister, paddles, lid and cap in warm soapy water and rinse in cold water. Note: The ice canister and paddles must be seperated bef
Résumé du contenu de la page N° 11
12 Month Replacement Guarantee We are so confident of the quality of our product, should this appliance develop any malfunction within 12 months of purchase (3 Months commercial use) due to faulty materials or manufacture, we will replace it for you absolutely free. Should you experience any difficulties Sunbeam Service Centres with your appliance, please phone our Sunbeam has established a network free call customer service line for of authorised service centres throughout advice on 1
Résumé du contenu de la page N° 12
Consumer Hotline In Australia Visit www.sunbeam.com.au Or call 1800 025 059 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered Trademark of Sunbeam. ‘Sunbeam Slurples’ is a trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright. Sunbeam Corporation Limited 2006. ABN 45 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd. 08/06
