Résumé du contenu de la page N° 1
MPD8860
User’s Guide
Personal AM/FM Stereo
Compact Disc MP3 Player
Before operating this product,
please read these instructions completely.
Résumé du contenu de la page N° 2
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock t
Résumé du contenu de la page N° 3
SAFETY PRECAUTIONS (CONTINUED) INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. Howeve
Résumé du contenu de la page N° 4
S E I R T A S S U S D O N I C Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
Résumé du contenu de la page N° 5
LOCATION OF CONTROLS 1 13 2 14 15 3 16 4 17 5 18 6 7 8 19 20 9 21 10 22 11 12 1. DC 4.5V Jack (Rear of Unit) 13. HOLD (ON/OFF) Switch 14. PROG (Program) Button z 15. Skip/TUNING n Button 2. Display 16. PLAY/PAUSE (®p) /POWER 3. RESUME/® Button ON Button 4. MODE/√ Button 17. Skip/TUNING o Button 5. PRESET UP ▲ Button 18. STOP (■)/POWER OFF 6. PRESET DOWN ▼ Button Button 7. ENTER/CLEAR Button 19. LINE OUT Jack (Side of Unit) 8. MENU/ESP/BAND Button 20. PHONES (Headphones) Jack (Side of Unit) 9. Ba
Résumé du contenu de la page N° 6
+ – – + POWER SOURCES This CD player requires either two (2) “AA” cell batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION “Low Battery” will appear in the CD display when the batteries need replacing. 1. Open the CD compartment, then open the battery compartment door by pressing in on the tab and then lifting it. To prevent the possibility of losing the cover, it cannot be removed. 2. Insert two (2) “AA” cell batteries (not included) according to the polarity diagram
Résumé du contenu de la page N° 7
OPERATION BASS BOOST TURNING POWER ON/OFF 1 1 1 2 To emphasize the bass, slide the To turn the unit on, press the DBBS switch to the ON position. For PLAY/PAUSE (®p)/POWER ON button ❶. normal bass, slide the DBBS switch to 1 To turn the unit off, Press the STOP (■) the OFF position. /POWER OFF button ❷ while in the Stop mode. HOLD 1 Slide to the ON position to disable the buttons; “Hold” will briefly appear in the display. When pressing the buttons on the CD compartment lid, "Hold" will briefly
Résumé du contenu de la page N° 8
RADIO OPERATION TO LISTEN TO THE RADIO 1 2 3 2 2 1 1 Slide the FUNCTION switch 1 to the RADIO Set the VOLUME control 1 to minimum position. Press the MENU/ESP/BAND and plug the headphones into the button 2 to select a band (AM or FM). If PHONES jack. Press the PLAY/PAUSE listening to FM, press the MODE/√ button (®p)/POWER ON button 2 to turn the 3 to select Stereo or Mono. unit on. 3 4 3 1 2 1 2 Press and release the Skip/TUNING o Adjust the VOLUME control 1 and DBBS 1 or n 2 button to tune a st
Résumé du contenu de la page N° 9
RADIO OPERATION (CONTINUED) TO SET AND RECEIVE A STATION INTO MEMORY 1 2 3 1 2 Tune a desired station as described in Within ten seconds, select the desired the previous section. Press the PROG preset using the PRESET UP ▲ 1 or button; the preset number will blink. DOWN ▼ 2 button. Press the PROG button 3 to confirm. 1 2 3 1 2 To receive a preset station, simply press the PRESET UP ▲ 1 or DOWN ▼ 2 button to select the desired preset. 8
Résumé du contenu de la page N° 10
CD OPERATION TO INSERT AND PLAY A CD This CD player is designed to play all kinds of Audio Discs and MP3 CD Roms, such as CD recordables and rewritables. Do not try to play CDI, CDV, DVD or computer CDs in this unit. 1 2 2 1 Open the CD compartment lid by Press the PLAY/PAUSE (®p)/POWER sliding the CD OPEN switch 1 to the ON button to begin playback; the current track and elapsed playing time right. Gently press a disc, label side (CD information and folder will also up, onto the spindle until i
Résumé du contenu de la page N° 11
CD OPERATION (CONTINUED) CD PLAYBACK NOTES: • See page 17 for more information on MP3’s. • When recording (“burning”) CDs, make sure the session is “finalized”, or simply record “burn” only one session. You can find more information in your recorder’s manual. • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, “No Disc” will appear in the display. • If a disc is not recorded properly, a d
Résumé du contenu de la page N° 12
CD OPERATION (CONTINUED) TO BEGIN PLAYBACK FROM A SPECIFIC TRACK 1 2 1 2 After you insert the disc into the CD When the desired track number (and player and the total number of tracks file number if using MP3) appears in appear in the display, you may press the display, press the PLAY/PAUSE either the Skip/TUNING o 1 or n 2 (®p)/POWER ON button. Playback will button to select a specific track for begin with the track (or file) you select- playback. ed. 2 2 FORWARD/REVERSE SKIP TRACK 1 2 During p
Résumé du contenu de la page N° 13
CD OPERATION (CONTINUED) HIGH-SPEED MUSIC SEARCH During playback, depress and hold 1 either the Skip/TUNING o 1 or n 2 button to move the player forward or 1 2 backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the buttons are depressed. When you release the Skip/TUNING o 1 or n 2 button, normal playback will resume. REPEAT PLAYBACK OF ONE TRACK 1 2 2 3 To repeat a single track, while in the When the desired track numbe
Résumé du contenu de la page N° 14
CD OPERATION (CONTINUED) REPEAT PLAYBACK OF ALL TRACKS 1 2 To repeat all the tracks on the CD, Press the PLAY/PAUSE (®p)/POWER press the MODE/√ button twice; ON button to begin playback. The "REP “REP A” will appear in the display. A" indicator will disappear from the dis- play after a few seconds and all tracks on the disc will be repeated continuously. 2 3 REPEAT PLAYBACK OF A FOLDER (MP3 w/folders only) 2 2 1 2 2 3 To repeat all files in a directory (MP3 Press the PLAY/PAUSE (®p)/POWER CD onl
Résumé du contenu de la page N° 15
CD OPERATION (CONTINUED) INTRO PLAYBACK (Will play the first 10 seconds of each track) 1 2 While in the Stop mode, press the Press the PLAY/PAUSE (®p)/POWER MODE/√ button 3 times (4 times if an ON button to begin Intro playback. The MP3 CD with multiple directories is "INTRO" indicator will disappear from inserted); “INTRO” will appear in the the display after a few seconds and the display. first 10 seconds of all tracks on the disc will be played in sequence. 2 3 TO RANDOMLY PLAY BACK A CD 2 2
Résumé du contenu de la page N° 16
CD OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 24 TRACKS) Programming is the ability to preselect the order in which a series of tracks will be played. 1 2 1 2 While in the Stop mode, press the PROG Select a track to be programmed using the button. The track number will blink and Skip/TUNING o 1 or n 2 button. If using “P-01” will appear in the display. a MP3 disc, see note below. 1 2 3 4 Press the PROG button to memorize Press the PLAY/PAUSE (®p)/POWER the track. Repeat steps 2 and 3 to
Résumé du contenu de la page N° 17
CD OPERATION (CONTINUED) NOTES ON PROGRAM PLAYBACK • You can review the program by pressing the PROG button repeatedly while in the Stop mode. • To add a track to the program memory, simply press the PROG button repeatedly until the track (directory if using an MP3) appears and “00” blinks in the display, then continue as per the steps 2 and 3 on the previous page. • Press the STOP (■)/POWER OFF button to stop the program before it is finished (the program memory will be kept). • Each file may b
Résumé du contenu de la page N° 18
CD OPERATION (CONTINUED) MP3 FAQs–Frequently Asked Questions Please read before playing an MP3 CD. Does the unit support packet write CD-RW? Yes, it can. You can add or delete MP3 files without reformatting. It appears like a PC hard drive. Can the unit read regular music CDs? Yes, it can. However you can not mix MP3s and WAV files on the same CD. If you do this your Portable MP3 CD Player will play only the MP3 files. Does the unit have Electronic Skip Protection built-in? Yes, it has an anti-s
Résumé du contenu de la page N° 19
1 2 CD OPERATION (CONTINUED) SELECTING SONGS BY MP3 TITLE You can search for a song by title as follows: 1 2 4 2 With an MP3 disc inserted, press the Select the first letter of a file you would MENU/ESP/BAND button; the alpha- like to listen to using the MODE/√ 1 bet will appear in the display. and/or RESUME/® 2 buttons. Press the PRESET DOWN ▼ button 3 to 2 3 access the lower letters or PRESET UP ▲ button 4 to access the higher letters. 3 4 3 Press the ENTER/CLEAR button 1 When the desired file
Résumé du contenu de la page N° 20
1 CD OPERATION (CONTINUED) SEARCHING THROUGH MP3 DIRECTORIES You can search the contents of the directories (if burned on CD) as follows: 1 2 2 Press the MENU/ESP/BAND button To select a file from the directory, use twice; the first directory will appear in the MODE/√ 1 and/or RESUME/® 2 the display, as well as its contents. buttons. 2 3 3 4 1 2 If you would like to change directories, When the desired file appears, press use the PRESET ▲ 1 and/or ▼ 2 the ENTER/CLEAR button and the file will aut
