Instruction d'utilisation Cambridge Audio ID10

Résumé du contenu de la page N° 1

iD10
® ™
Docking Station for Apple iPod
User’s manual

Résumé du contenu de la page N° 2

Safety precautions Checking the Power Supply Rating For your own safety please read the following instructions carefully before attempting to connect this unit to the mains. Check that the power supply unit indicates the correct supply voltage. If your mains supply voltage is different, consult your dealer. This unit is designed to operate only on the supply voltage and type that is indicated on the power supply unit. Connecting to other power sources may damage the unit. This equipment must be

Résumé du contenu de la page N° 3

Important safety instructions Please take a moment to read these instructions before installing your iD10, as they will enable you to get the best performance and prolong the life of the unit. We advise you follow all instructions, heed all warnings and keep the instructions for future reference. Positioning Choose the installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, cold or moisture

Résumé du contenu de la page N° 4

iD10 ® ™ Docking Station for Apple iPod User’s manual This Docking Station enables you to get the best sound quality from your iPod by both allowing you to charge the iPod battery and play music from your iPod on your home stereo system. Docking adaptor slot Dock connector Remote sensor 1 2 Contents 1 1 x Docking station 2 1 x UK power supply 3 3 x Docking adaptors 3 x 3

Résumé du contenu de la page N° 5

Dock adaptors The iD10 comes with 3 types of docking adaptors. Insert the dock adaptor that fits your iPod model, then plug in your iPod. iPod models supported iPod Nano (2GB/4GB and 8GB) iPod (20GB/40GB and U2 Special Edition ) iPod with colour display (40GB/60GB and 80GB) Note: The docking station does not support iPod Shuffle. Connecting your iD10 1 2 Audio In 12V DC IN 1 Audio output Connect your docking station to your amplifier/stereo system (3.5mm to Dual Phono - not included). 2 12V

Résumé du contenu de la page N° 6

iD10 Accessory Pack (Not included, sold separately) An iD10 Accessory Pack (C3037) is available for purchase from your Cambridge Audio dealer. The pack consists of: 1 Audio Cable (3.5mm to Dual Phono/ 1 2 RCA stereo mini-jack) 2 Remote Control Remote control Power Press to switch the iPod on/off. Menu Press to go back to the previous menu. Navigate Press to navigate up/down. Press ENTER to confirm selection. Skip Press to select previous/next song. Hold to fast-forward/rewind song. Enter Pres

Résumé du contenu de la page N° 7

Troubleshooting Why is my remote control not responding? For the remote control to work as intended with your iPod, it must be running the most updated Apple software. If you need to upgrade, simply visit the Apple iPod website and follow the instructions there for a free download. Go to: http://www.apple.com/iPod/download/ If it does not work, please unplug the power cable for 1 minute, then plug it back in. This resets the system. Why is there no sound? Check if your iPod is correctly docked

Résumé du contenu de la page N° 8

Limited warranty Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio's option) this product or any defective parts in this product. Warranty periods may vary from country to country. If in doubt consult your dealer and ensure that you retain proof of purchase. To obtain warranty service, please contact the Cambridge Audio authorised dealer from which you pu