Résumé du contenu de la page N° 1
R
P2B
®
Pentium II Motherboard
USER’S MANUAL
Résumé du contenu de la page N° 2
USER'S NOTICE No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED W
Résumé du contenu de la page N° 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support Fax: +886-2-2895-9254 BBS: +886-2-2896-4667 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL Marketing Address: 6737 Mowry Avenue, Mowry Business Center, Building 2 Newark, CA 94560, USA Fax: +1-510-608-4555 Email: info-usa@asus.com.tw Technical
Résumé du contenu de la page N° 4
CONTENTS I. INTRODUCTION 7 How this Manual is Organized ........................................................... 7 Item Checklist ..................................................................................... 7 II. FEATURES 8 Features of the ASUS P2B Motherboard ............................................ 8 The ASUS P2B Motherboard ........................................................ 9 III. INSTALLATION 10 Layout of the ASUS P2B Motherboard ........................................
Résumé du contenu de la page N° 5
CONTENTS Chipset Features Setup ................................................................ 44 Details of Chipset Features Setup.......................................... 44 Power Management Setup........................................................... 47 Details of Power Management Setup .................................... 47 PNP and PCI Setup ..................................................................... 50 Details of PNP and PCI Setup ..........................................
Résumé du contenu de la page N° 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Résumé du contenu de la page N° 7
I. INTRODUCTION How this Manual is Organized This manual is divided into the following sections: I. Introduction: Manual information and checklist II. Features: Information and specifications concerning this product III. Installation: Instructions on setting up the motherboard IV. BIOS Software: Instructions on setting up the BIOS software V. Support Software: Information on the included support software Item Checklist Please check that your package is complete. If you discover damaged or missi
Résumé du contenu de la page N° 8
II. FEATURES Specifications II. FEATURES Features of the ASUS P2B Motherboard The ASUS P2B is carefully designed for the demanding PC user who wants ad- vanced features processed by the fastest CPU. ® TM • Multi-Speed: Supports Intel Pentium II (233 to 450MHz) and Celeron (266MHz and faster) processors. • Multi-Cache: Supports processors with or without Pipelined Burst Level 2 cache. • Intel AGPset: Features Intel’s 440BX AGPset with I/O subsystems and front-side bus (FSB) platform, which boosts
Résumé du contenu de la page N° 9
II. FEATURES The ASUS P2B Motherboard ATX Power CPU Connector Slot 1 Intel 440BX AGPset 3 DIMM Sockets T: PS/2 Mouse B: PS/2 Keyboard T: USB Port 1 B: USB Port 2 B: COM 1 T: Parallel B: Serial B: COM 2 Universal Folding Retention Mechanism Accelerated Graphics Port Wake-On-LAN Connector 4 PCI Slots Programmable 2Mbit Flash EEROM Hardware Monitoring ASIC 3 ISA Slots ASUS P2B User’s Manual 9 II. FEATURES Motherboard Parts
Résumé du contenu de la page N° 10
III. INSTALLATION Board Layout III. INSTALLATION Layout of the ASUS P2B Motherboard PWR_FAN TOP: CPU_FAN Mouse PS/2 BOTTOM: Keyboard TOP: USB 1 USB BOTTOM: USB 2 BUS FREQ FS2 FS1 FS0 Intel 440BX AGPset JTCPU Accelerated Graphics Port Wake-On-LAN Connector PCI Slot 1 CR2032 3V Multi-I/O Lithium Cell (BIOS Power) PCI Slot 2 CLRTC PCI Slot 3 Intel PIIX4E SBLINK CHASIS PCIset BF3 BF2 JTPWR PCI Slot 4 BF1 BF0 ISA Slot 1 ASUS Hardware R Monitor ASIC CHA_FAN ISA Slot 2 Infrared Connector IDE LED SMB Co
Résumé du contenu de la page N° 11
III. INSTALLATION Jumpers 1) CLRTC p. 13 Clear Real Time Clock (RTC) RAM (Short/Clear CMOS) 2) KBPWR p. 13 Keyboard Power 3) FS0, FS1, FS2 p. 14 CPU External Clock (BUS) Frequency Selection 4) BF0, BF1, BF2, BF3 p. 14 CPU Core:BUS Frequency Multiple Expansion Slots/Sockets 1) System Memory p. 17 System Memory Support 2) DIMM Sockets p. 18 DIMM Memory Module Support 3) CPU Slot 1 p. 19 Pentium II/Celeron CPU Support * 4) SLOT1, SLOT2, SLOT3 p. 24 16-bit ISA Bus Expansion Slots 5) PCI1, PCI2,PCI3,
Résumé du contenu de la page N° 12
III. INSTALLATION Jumpers III. INSTALLATION Installation Steps Before using your computer, you must complete the following steps: 1. Set Jumpers 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electric- ity,
Résumé du contenu de la page N° 13
R R III. INSTALLATION Jumper Settings 1. Clear Real Time Clock (RTC) RAM (CLRTC) The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and unplug your AC power, (2) Short the two points labeled CLRTC, (3) Turn on your computer, (4) Hold down during bootup and enter BIOS setup to re-enter user preferences. Short small solder points to clear CMOS CLRTC P2B Clear RTC RAM 2. Keyboard Power Up (KBPWR) This allows you to disable or enabl
Résumé du contenu de la page N° 14
R III. INSTALLATION Jumpers III. INSTALLATION 3. CPU Bus Frequency (FS0, FS1, FS2) This option tells the clock generator what frequency to send to the CPU, DRAM, and 440BX AGPset. This allows the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock multiplied by the BUS Ratio equals the CPU’s Internal fre- quency (the advertised CPU speed). 4. CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3) This option sets the frequency ratio between the Internal frequency of the CPU an
Résumé du contenu de la page N° 15
(This page was intentionally left blank.) ASUS P2B User’s Manual 15
Résumé du contenu de la page N° 16
(This page was intentionally left blank.) 16 ASUS P2B User’s Manual
Résumé du contenu de la page N° 17
III. INSTALLATION 2. System Memory (DIMM) This motherboard uses only Dual Inline Memory Modules (DIMMs). Three sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of either 8, 16, 32, 64, 128 or 256MB to form a memory size between 8MB to 768MB. One side (with memory chips) of the DIMM takes up one row on the motherboard. To utilize the chipset’s Error Checking and Correction (ECC) feature, you must use a DIMM module with 9 chips per side (
Résumé du contenu de la page N° 18
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
