Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Contents Overview ........................................................................................................................4 Package Contents ........................................................................................... 4 Connecting your NB1300Plus4 ....................................................................... 5 Do I need a Micro filter? ................................................................................... 7 LED Indicators ....................
Résumé du contenu de la page N° 3
User Password.............................................................................................. 59 Misc Configuration ......................................................................................... 60 System Log .................................................................................................... 62 Code Update .................................................................................................. 64 Status .........................................
Résumé du contenu de la page N° 4
Overview Package Contents The following items should be contained in your NB1300Plus4 ADSL Modem Router Package: ❒ One ADSL ModemPlus4 Port Switch (NB1300+4) ❒ Package Contents Note and a User Guide ❒ Power Adaptor (9VAC/800mA) ❒ Telephone Line Cable (RJ11) and 605 to RJ11 Adaptor ❒ Ethernet Network Cable (RJ45) ❒ USB Cable ❒ Microfilter ❒ NetComm Communications CD-ROM Check the contents of your package and, if any parts are missing or damaged, please contact your Dealer. www.netcomm.com.au Rev
Résumé du contenu de la page N° 5
Overview Connecting your NB1300Plus4 The NB1300Plus4 can be connected via a USB cable or an Ethernet cable or both. The reason for this is that the USB connection is simply an ethernet simulation, as far as your computer is concerned the USB connection is an Ethernet connection, hence DHCP and other protocols will work the same as for Ethernet. Connecting your NB1300Plus4 ADSL Modem via Ethernet 1. Connect your NB1300Plus4 to either a computer directly or a network hub or switch using cat5 ether
Résumé du contenu de la page N° 6
Connecting your NB1300Plus4 ADSL Modem via USB 1. Connect the power pack to the NB1300Plus4 ADSL Modem and switch on the power switch. 2. Install the USB driver (Windows 98/Me/2000/XP only - for Macintosh see page 34.) When you install the USB driver on your computer it creates a Virtual Ethernet Adapter, which can be configured in the same way as a Network Interface card with DHCP or static IP address. To install the USB driver please follow the steps below; a. Boot your machine into Windows 98
Résumé du contenu de la page N° 7
Overview Do I need a Micro filter? Micro filters are used to prevent common telephone equipment, such as phones, answering machines and fax machines, from interfering with your ADSL service. If your ADSL enabled phone line is being used with any other equipment other than your ADSL Modem then you will need to use one Micro filter for each phone device. Splitters may be installed when your ADSL line is installed or when your current phone line is upgraded to ADSL. If your telephone line is alre
Résumé du contenu de la page N° 8
LED Indicators The LED Indicators are located on the front of the unit, they are green in colour. The meanings are as follows: Label Meaning Status Indicates: PWR Power On Power is on Off Power is off Flashing Unit is powered up correctly when pulsing steadily. ON or OFF during reboot or when unit switched OFF. If ON or OFF permanently then there is an error. Try powering unit OFF then ON after a minute. LNK WAN Link Flashing Link being attempted by router and when receiving or sending data on t
Résumé du contenu de la page N° 9
Overview Using Easy Config Loading an ISP profile into your NB1300Plus4 NetComm’s Easy Config software is supplied to help you to configure your NB1300Plus4 for a quick connection to the Internet. You can use one of the default profiles provided or you can use a profile that is provided by your Internet Service Provider (e.g. via Email, floppy disk or CD- ROM). A number of examples are supplied in the next section to assist you in selecting the appropriate connection configuration to connect you
Résumé du contenu de la page N° 10
8. Click the Configure My Router button and follow the on-screen prompts. The software will ask you to ensure your router is powered on, click OK to continue. 9. When prompted you should power off your router and then power it back on again. You can close Easy Config at this point by clicking the Exit button. Note: It may also be beneficial to reboot your computer but this is usually not required. 10. Once your NB1300Plus4 has booted (RDY light pulses) wait one minute and you should now be able
Résumé du contenu de la page N° 11
Overview Factory Defaults The following table lists the Factory Defaults of your NB1300Plus4 ADSL Modem: Field Setting Details LAN IP address: 192.168.1.1 LAN Subnet Mask: 255.255.255.0 DHCP Server: Enabled User Name: admin Password: password Main Function: Router (Bridge Disabled) WAN connection type: PPPoE LLC VPI: 8 VCI: 35 Note: These defaults may change with firmware updates and factory changes, please consult the NetComm website to check for the latest defaults. Resetting to factory defaul
Résumé du contenu de la page N° 12
Configuration Types This section is supplied to help you connect your NB1300Plus4 ADSL Modem quickly to your network or Windows computer. The following are the most common configurations for using your NB1300Plus4 ADSL Modem. ■ ADSL Modem - Ethernet This is when you plug the modem directly into the Ethernet port of a computer and then run Internet connection software (often supplied by your ISP) on the computer to establish a connection to the Internet. This method means that the computer co
Résumé du contenu de la page N° 13
ADSL Modem - Ethernet ADSL Modem - Ethernet Configuration Use this configuration if you: ■ Have been told to use the “ADSL Modem” Easy Config Profile, or ■ Want to connect this device to another router, or ■ Want to use your ISP’s software to log on to the Internet directly (not sharing) and your computer will use a Public IP address, and ■ DO NOT need the NB1300Plus4 to share your Internet service ( You can still use windows ICS to share your Internet Service), and ■ Do not require your compute
Résumé du contenu de la page N° 14
Before continuing, ensure you have the following items and information ready: ■ A computer with a Network Interface Card installed or a router (such as the NetComm NB3100 Compact). ■ An Ethernet network cable. ■ A telephone line with ADSL service enabled. ■ User Name, Password, VPI, VCI, encapsulation and DNS server settings for your ADSL account (ask your ISP if unsure). These are not needed for the NB1300Plus4, but are required for the computer or router that it will be connected to. Note: Th
Résumé du contenu de la page N° 15
ADSL Modem - Ethernet Step 2: Configuring the NB1300Plus4 After connecting all the ADSL Router cables you can either configure your NB1300Plus4 using the Easy Config software provided (Refer to page 25) or complete the following manual configuration instructions: a. Power on the ADSL Router and launch a web browser, such as Internet Explorer or Netscape Navigator, browse to the address http://192.168.1.1. b. Enter the correct user name and password to access the Configuration tool. The default
Résumé du contenu de la page N° 16
Field Setting Details Service name: Blank ❖ User Name: Blank ❖ Password: Blank ❖ Disconnect timeout: 0 ❖ Mode/Wan Connection Type: 1483 Bridged IP LLC VPI: 8 ❖ VCI: 35 ❖ Static IP Address: 192.168.241.101 ❖ Subnet Mask: 255.255.255.0 ❖ Default Gateway: 0.0.0.0 ❖ Bridge mode: Enabled ❖ Default Setting. Although in most cases you will not be required to alter these default settings for your NB1300Plus4, your ISP may identify specific settings to enable connection to their service. Please refer
Résumé du contenu de la page N° 17
ADSL Modem - Ethernet Operational Diagram for ADSL Modem Configuration Rev. 1 - YML674 www.netcomm.com.au NB1300Plus4 ADSL Modem Page 17
Résumé du contenu de la page N° 18
ADSL Modem - USB Configuration Use this configuration if you: ■ Have been told to use the “ADSL Modem” Easy Config Profile, or ■ Want to connect this device to another router, or ■ Want to use your ISP’s software to log on to the Internet directly (not sharing) and your computer will use a Public IP address, and ■ DO NOT need the NB1300Plus4 to share your Internet service ( You can still use windows ICS to share your Internet Service), and ■ Do not require your computer to be protected (via NAT)
Résumé du contenu de la page N° 19
ADSL Modem - USB Before continuing, ensure you have the following items and information ready: ■ A computer with a Network Interface Card installed or a router (such as the NetComm NB3100). ■ A USB cable. ■ A telephone line with ADSL service enabled. ■ User Name, Password, VPI, VCI, encapsulation and DNS server settings for your ADSL account (ask your ISP if unsure). These are not needed for the NB1300Plus4, but are required for the computer or router that it will be connected to. Note: The fol
Résumé du contenu de la page N° 20
Step 2: Configuring the NB1300Plus4 After connecting all the ADSL Router cables you can either configure your NB1300Plus4 using the Easy Config software provided (Refer to page 9) or complete the following manual configuration instructions: a. Power on the ADSL Router and launch a web browser, such as Internet Explorer or Netscape Navigator, browse to the address http://192.168.1.1. b. Enter the correct user name and password to access the Configuration tool. The default user name and password
