Résumé du contenu de la page N° 1
MICROWAVE OVENS
I
N
S
T
R
U
C
T
I
O
N
S
MODEL HM1600
MICROWAVE OVEN
ML-114794
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
(937) 332-3000
www.hobartcorp.com
FORM 33971 (10-99)
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions must be followed, including the following: WARNING: TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE, INJURY TO PERSONS, OR EXPOSURE TO EXCESSIVE MICROWAVE ENERGY: 1. Do not use metal utensils in this oven. 2. Read all instructions before using oven. 3. Read and follow the “Precautions to Avoid Possible Exposure to Excessive Microwave Energy” on the next page. 4. This microwave oven must be grounded. Connec
Résumé du contenu de la page N° 3
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY 1. Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. 2. Do not place any object between the oven front face and the door, or allow soil or cleaner residue to accumulate on sealing surfaces. 3. Do not operate the oven if it is damaged. It is particularly important that the oven do
Résumé du contenu de la page N° 4
TABLE OF CONTENTS GENERAL............................................................................................................................................ 5 Radio Interference................................................................................................................... 5 INSTALLATION ................................................................................................................................... 6 UNPACKING .......................................
Résumé du contenu de la page N° 5
INSTALLATION, OPERATION AND CARE OF MODEL HM1600 MICROWAVE OVEN GENERAL Microwave heat is generated inside the food rather than being conducted through the food as in conventional methods. Time is used to control the amount of heating that occurs. Microwave energy is absorbed in proportion to the moisture content of the food. The microwave energy causes water molecules to vibrate at high speeds resulting in friction (HEAT). The Model HM1600 produces microwave energy in a magnetron where an elec
Résumé du contenu de la page N° 6
INSTALLATION UNPACKING Immediately after unpacking the microwave oven, check for possible shipping damage. If this oven is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Removal of Protective Film A blue protective film is used to prevent scratching of the outer case during transportation. Peel the film from the exterior of the oven before installation or use. LOCATION Locate the oven on a smooth, flat and stable surface. There should be no
Résumé du contenu de la page N° 7
ELECTRICAL CONNECTIONS Before making electrical connections, verify that the electrical service agrees with the specifications on the data plate on the lower right side as you face the oven. Grounding Instructions This appliance must be grounded electrically. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The p
Résumé du contenu de la page N° 8
OPERATION CONTROLS (FIG. 3) PL-41351 POWER LEVEL — Touch the pad to change to the next power level: HI MED LOW DEF HOLD. (HOLD does not apply any microwave heating; it allows time to pass so that heat from a previous cooking stage can conduct through the product.) SHIFT — There are 16 memory pads: A1 – A8 and B1 – B8. SHIFT selects B. 1 – 8 A B — Each memory pad has pre-programmed power level and time settings for t 1, 2, or 3 stage cooking. Factory settings, described on the next page, ma
Résumé du contenu de la page N° 9
Power Level Chart (approximate values) HI MED LOW DEF HOLD WATTS 1600 800 320 160 0 PERCENT 100 50 20 10 0 NOTE: Hold does not apply any microwave heating; it allows time to pass so that heat from a previous cooking stage can conduct through the product. Factory Preset MEMORY PADS are preset to HI power level and 1 stage cooking for these times. M1 emory Pad # A2A3A4A5A6A7A8 A P. reset Time1. 0 sec2. 0 sec3. 0 sec4. 5 sec1. min1. min. 15 sec1. min. 30 sec 2 min See Pages 13 and 14 for Programmi
Résumé du contenu de la page N° 10
Manual Single Stage Heating Example: Heat for 1 minute 30 seconds at MEDIUM power. • Open the door and place the food inside the oven. Close the door. Timer display shows [ 0 ]. • Touch the POWER LEVEL pad until the indicator above MED is lit. • Turn the Dial Timer until 1:30 is displayed. • Touch the START pad. The cavity light comes on; heating begins. Display Time counts down. Stage number and Power level flash. • After the time has elapsed, heat stops, BEEP sounds and [ 0 ] flashes. • O
Résumé du contenu de la page N° 11
Manual 2 or 3 Stage Heating Example: Heat for 1 minute 30 seconds at MEDIUM power (1st stage) and then heat for 2 minutes at DEFROST (2nd stage). • Open the door and place food inside the oven. Close the door. The Timer display shows [ 0 ]. • Touch the POWER LEVEL pad until the indicator above MED is lit. • Turn the Dial Timer until 1:30 is displayed. • Touch the POWER LEVEL pad until the indicator above DEF is lit. • Turn the Dial Timer until 2:00 is displayed. • Touch the START pad. The ca
Résumé du contenu de la page N° 12
Programmed Heating Example: Microwave for 1 minute on HIGH power (1 stage heating). Memory Pad A – 5 was preset for 1 minute on HIGH power (see Factory Preset, page 9). • Open the door and place food inside the oven. Close the door. Timer display shows [ 0 ]. • Press memory pad 5. Display shows [ 1:00 ], indicator is lit above HI and A-5 is lit. – If the oven is in Program Lock mode, heating begins without pressing Start. – If the oven is not in Program Lock mode, press Start. Heating begins a
Résumé du contenu de la page N° 13
Programming Memory Pads Example: To program memory pad A – 5 to DEFROST for 3 minutes. • Remove the left air filter (refer to Cleaning Air Filters for removal instructions). Press the PROG button. If no PROG indication appears in the display, Program Lock should be cancelled. Refer to Program Unlock. – If you want memory pad A–5, press memory pad 5. The pad number, A–5, and the power level and time are displayed. A B t – If you want B – 5, press SHIFT and then press memory
Résumé du contenu de la page N° 14
Programming Memory Pads for 2 or 3 Stage Heating Example: Program memory pad A – 5 to DEFROST for 3 minutes and then to cook on HIGH power level for 2 minutes. • Remove the left air filter (refer to Cleaning Air Filters for removal instructions). Press the PROG button. If no PROG indication appears in the display, Program Lock should be cancelled. Refer to Program Unlock. – If you want memory pad A–5, press memory pad 5. The pad number, A–5, and the previously selected time and power level
Résumé du contenu de la page N° 15
Program Lock This feature allows you to lock the memory pads’ power levels and heating times and allows one touch operation of the oven (pressing START is not required). 1. Remove the right air filter. 2. Press and hold in the PROG LOCK button for 5 seconds until the display shows PROG P L . Do not press PROG LOCK for more than 30 seconds or a false failure may occur. 3. After 3 seconds, the display goes blank. 4. Reinstall the air filter. When PROG LOCK is active, opening the door
Résumé du contenu de la page N° 16
List Memory This feature allows you to review all memory pad power levels and heating times for all three cooking stages. 1. Open the door and leave it open. 2. While pressing STOP/RESET, press and hold in the START pad for 2 seconds. 3. The display window shows all memory pads and power level and time settings for all three programmable cooking stages. You may cancel the review at any time by pressing STOP / RESET twice. A1 1 2 3 B1 1 2 3 A2 1 2 3 B2 1 2 3 A3 1 2 3 B3 1 2 3 A4 1 2 3 B4 1 2 3 A5
Résumé du contenu de la page N° 17
Programming Beep Tone Loudness The Beep tone can be set at one of three levels of loudness or be silent. 1. Remove air filters. 2. Press PROG. 3. Press BEEP (once to select 3 Loud) (twice to select 2 Moderate) (three times to select 1 Soft) or (four times to select 0 Silent). Repeat until the tone you want is selected. 4. Press PROG. 5. After 3 seconds, the display returns to standby (blank if door is closed). 6. Reinstall air filters. Programming Beep Tone Duration Duration of Beep can be selec
Résumé du contenu de la page N° 18
To Read the Cycle Counter The oven can display the total number of times it has operated. 1. Remove the air filters. 2. Open the door. 3. Close the door. Perform the next step within 60 seconds before the display goes blank. 4. While pressing BEEP, press PROG at the same time. The display shows the cycle count. After 3 seconds, the display goes blank. When the door is opened, 0 will display. 5. Reinstall the air filters. –18–
Résumé du contenu de la page N° 19
Cleaning WARNING: UNPLUG THE POWER CORD. Keep the inside of the oven clean. If pieces of food or spilled liquids stick to the oven walls, or between the door seal and the door surface, they will absorb microwaves and may cause arcing or sparks. Wipe up all spills with a damp cloth. Kitchen detergent may be used if the oven gets very dirty. Do not use harsh detergents or abrasive cleaners. Clean the outside surface of this microwave oven with a cloth dampened with soap and water, then dry wit
Résumé du contenu de la page N° 20
TROUBLESHOOTING Failure Codes The HM1600 Microwave monitors its operation and displays a Failure Code when a problem occurs. CODE CAUSE WHAT TO DO • Overcooked food. F01 • Unplug the oven to stop beep. • Temperature of exhaust air too • Wait for oven to cool down to reset high. operation. • If food ignites, do not open the door. If normal operation does not resume, call the service agent with information of failure code. • Incoming line voltage too high. • Check line voltage and that voltage F03
