Instruction d'utilisation Behringer B-1

Résumé du contenu de la page N° 1

User Manual
SINGLE DIAPHRAGM CONDENSER
MICROPHONE
Gold-Sputtered Large-Diaphragm Studio
Condenser Microphone

Résumé du contenu de la page N° 2

2 SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual Take care not to drop your Important Safety microphone as this can lead to Instructions severe damage. BEHRINGER assumes no liability for any damage caused by the user. When the microphone is not in use, please take it out from its elastic suspension, clean it with Terminals marked with this a soft cloth, and then place it in its case. symbol carry electrical current of Place the bag containing moisture-absorbing sufficient magn

Résumé du contenu de la page N° 3

3 SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual 1. Power Supply 90 Your condenser mic B-1 needs a +48-V phantom power supply. 0 dB Behringer assumes no liability for any damage caused by a defective 120 60 -5 phantom power supply. Always mute the sound reinforcement system -10 before you switch on the phantom power supply. After power-up, -15 the B-1 needs about 6 seconds to stabilize. 150 30 -20 -25 -30 2. Directivity, Low-Cut Filter and -35 180 -40 0 Level Attenuation The

Résumé du contenu de la page N° 4

4 SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual 5. Specifications Transducer type condenser, 1" single diaphragm Operating principle pressure gradient Polar pattern cardioid Connection gold-plated balanced XLR connector Open circuit voltage at 1 kHz -34 +/-2 dBV (0 dBV = 1 V/Pa) Open circuit sensitivity 20 mV/Pa Frequency range 20 Hz - 20 kHz Level attenuation -10 dB (switchable) Low-Cut filter 6 dB/Octave at 75 Hz (switchable) Max. SPL (1% THD @ 1 kHz) 138 dB (0 dB), 148 dB (-10 dB) Eq

Résumé du contenu de la page N° 5

We Hear You