Instruction d'utilisation Oricom UHF100

Instruction d'utilisation pour le dispositif Oricom UHF100

Dispositif: Oricom UHF100
Catégorie: Radio maritime
Fabricant: Oricom
Dimension: 2.49 MB
Date d'addition: 10/19/2013
Nombre des pages: 36
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif Oricom UHF100. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec Oricom UHF100.

Pour votre confort

Si regarder l'instruction Oricom UHF100 directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction Oricom UHF100 en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction Oricom UHF100 sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
Oricom UHF100 Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction Oricom UHF100 - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de Oricom UHF100. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

UHF100
UHF200
Operating Instructions
For UHF100 and UHF200 40 Channel UHF
2-way Citizen Band Radio

Résumé du contenu de la page N° 2

Résumé du contenu de la page N° 3

Table of contents Table of contents ..........................................................................3 Safety Information and Warnings ..................................................4 Controls and Connectors ...............................................................5 Installation ..................................................................................10 Operations ..................................................................................14 UHF channels and freq

Résumé du contenu de la page N° 4

Safety Information and Warnings Please read before installing or opearating Your Oricom Radio The operation of this radio in Australia and New Zealand is subject to conditions in the following licenses. In Australia the ACMA Radio communications (Citizen Band Radio Stations) and in New Zealand by MED General User Radio License for Citizen Band Radio and operation is subject to conditions contained in those licences. Safety Information and Warnings Potentially Explosive Atmospheres Turn you

Résumé du contenu de la page N° 5

Controls and Connectors Box Contents UHF100 1 x RF Radio 1 x Mount bracket with mounting screw for Remote Head Unit 1 x Remote Head Unit with 2m cable 1 x Microphone Hanger 1 x UHF100 Standard Microphone 1 x User Guide 1 x DC Power Cord with inline fuse 1 x Mounting bracket with mounting screws for RF Radio UHF200 1 x RF Radio 1 x Microphone Hanger 1 x Controller Speaker Micrphone 1 x 2m long Extention cable 1 x DC Power Cord with inline fuse 1 x Coupler for extention cable 1 x Mountin

Résumé du contenu de la page N° 6

Controls and Connectors Front View Remote Head unit (UHF100) 1 2 3 9 4 5 6 7 8 1. Microphone connector 6. Priority Channel On/Off, Key Lock On/Off, Alpha-numeric display 2. LCD Display 7. ID setting, 5 tone SelCall, Quiet 3. Power On/Off, channel & Volume control 8. Monitor, TSQ On/Off, Menu 4. Function button by short push & 9. External speaker Jack (3.5mm for Duplex On/Off by long push optional 8 ohm speaker) 5. Open Scan, Memory On/Off, Group Scan 6

Résumé du contenu de la page N° 7

Controls and Connectors Rear View Rear view of Radio (UHF100 & 200) 1. 3.5mm external jack for optional 8 ohm speaker 2. Power Supply connection 3. Antenna connection 3 2 1 Standard Microphone (UHF100) 1. Push To Talk (PTT) button 2. Volume Up, Channel Up 3. Volume Down, Channel Down 4. Power On/off, Volume and channel selector 3 4 2 1 7

Résumé du contenu de la page N° 8

Controls and Connectors Top view of Contoller Speaker Microphone (UHF200) 1. Volume Down, Channel Down 2. Volume Up, Channel Up 3. Power On/Off CH 200RX 1 3 2 Front view of Contoller Speaker Microphone (UHF200) 4. LCD Display 5. Function button & Duplex On/Off 6. Open Scan, Memory On/Off, Group Scan 7. Priority Channel On/Off, Key Lock On/Off, Alpha-numeric display 8. ID setting, 5 tone Selcal, Quiet 4 9. Monitor, TSQ On/Off, Menu 10. PTT Switch 9 8 7 6 5 10 8

Résumé du contenu de la page N° 9

Controls and Connectors LCD Icons & Indicators (UHF100 and UHF200) 1 2 3 4 5 6 18 7 8 9 16 10 11 12 13 17 15 14 1. FUNCTION 10. Open Scan 2. RX or TX Signal strength 11. Group Scan 3. Transmitter Indicator 12. Selelctive call Sending_to 4. Receiver Indicator 13. Selective call Receiving from 5. Quiet mode 14. 38 CTCSS Tone On/Off 6. Priority On/Off 15. DCS On/Off 7. Monitor On/Off 16. Channel number 8. Memory On/Off 17. ALPHA/NUMERIC 9. Key Lock 18. Call Alarm 9

Résumé du contenu de la page N° 10

Installation INSTALLATION CAUTION When installing your radio in your vehicle, check that during installation you do not damage any wiring or vehicle components that may be hidden around the mounting position. If you are unsure about how to install your radio, we suggest for optimum performance you have your radio professionally installed by a UHF specialist or Auto electrician. When installing the radio, avoid mounting it close to heaters or air conditioners. Do not press the PTT or CALL bu

Résumé du contenu de la page N° 11

Installation 1. Fix the mounting bracket in place by screwing through the slots in the bracket. 2. Fix the remote head unit to the mounting bracket with the thumb screws provided. 3. Connect the standard microphone to the remote head socket, and tighten up the thumb screw. Fitting the Controller Microphone Speaker (UHF200) The Remote Head uses an 8 pin telephone style plug and socket: 1. Position the microphone plug so the plastic flap faces downwards, and press the plug in

Résumé du contenu de la page N° 12

Installation Disconnecting the Remote Head/Speaker Controller Microphone It is recommended that the remote head be left permanently connected to the radio, but if it must be disconnected, proceed as follows: 1. Lift the rubber boot and the lip of the raised area on the front panel. 2. Ease the rubber boot out of the cable entr y hole and slide it along the cable away from the front panel. 3. Identify the plug locking lever , move the lever towards the plug body. At the same time gently pull

Résumé du contenu de la page N° 13

Installation Radio stays ON when the ignition is switched OFF Connect the radio's negative (black) lead to the vehicle chassis, or directly to the batteries negative terminal. Connect the radio's positive (red) lead via the 2 Amp fuse to the battery's positive terminal. Alternatively, the positive lead could be connected at the fuse box at a point that has +13.8 Volts continuously available (preferably the battery side of the ignition switch) via the 2 Amp fuse. Radio turns OFF with the igni

Résumé du contenu de la page N° 14

Operations Power on and off * Press and hold the PWR button on the UHF100 Remote Head or the UHF200 microphone PWR button for 2 seconds. * The default channel is set at CH01. CH CH 200RX 200RX UHF100 UHF200 Volume control * The UHF100 has a rotar y electric volume control. Adjust the volume by rotating the channel knob clock-wise or adjust the volume control by pressing the Volume Up or Volume Down buttons on the microphone. * The UHF200 has Volume Up or Volume Down but

Résumé du contenu de la page N° 15

Operations CH CH 200RX 200RX blinking Tri Function buttons To use the primary function (F, SC, PRI, ID, MO) press the required button. To use the secondary function (DPX, MEM, LO, CAL, TSQ) press and hold the button for 2 seconds. To use the third function (OS/GS, ALPHA, QUIET, MENU), press F/DPX and press the required button. OS / GS QUIET MENU ALPHA F/ DPX SC / MEM PRI / LO ID / CAL MO / TSQ Transmitting NOTE: Before transmitting on any channel, listen to check the channel is

Résumé du contenu de la page N° 16

Operations Priority Channel To store a Priority Channel, press the PRI/LO button. The letter "P" will appear when the priority channel is set. The channel you selected as your Priority Channel will then be automatically monitored during the Group Scan. Note: You can only store one channel as your priority channel. To store a Priority Channel 1. Select the required channel. 2. Briefly press and hold the PRI/LO button a loud beep is heard. The letter "P" appears when the priority channel is

Résumé du contenu de la page N° 17

Operations Selecting the Required CTCSS Tone To pre-select the CTCSS tone on your radio, please refer to the MENU settings on page 24. Enabling CTCSS on a Channel If a CTCSS tone has been selected, it can be enabled on individual channels. 1. Rotate the Channel knob to select the required channel. The letters "CT" will appear. 2. Press and hold the MO/TSQ button. OS / GS ALPHA QUIET MENU F/ DPX SC / MEM PRI / LO ID / CAL MO / TSQ You may activate CTCSS on as many channels as you wish excep

Résumé du contenu de la page N° 18

Operations Open Scan Group Scan With Group Scan the Radio scans for activity, but in addition, it also inserts your Priority Channel into the scan sequence. This means that your Priority Channel will be monitored regularly while scanning to ensure that no calls are missed. Any signals received on your Priority Channel will take precedence over any signals received on the other channels. GROUP OR PRIORITY SCAN OS / GS ALPHA QUIET MENU F/ DPX SC / MEM PRI / LO ID / CAL M

Résumé du contenu de la page N° 19

Operations Selcall Selcall or Selective Calling is a function that allows you to selectively call another radio, using a unique ID number. Your radio has 10 programmable Selcall ID memories. The ID memories are displayed as "C0 to C9". Here you will program Selcall ID numbers of other radios. Your Radio’s Selcall Identification number is preset at "12345". You must change this number to your own unique five digit Selcall ID number. Selcall Identification Name In addition to the Selcall ID nu

Résumé du contenu de la page N° 20

Operations Entering, Editting and Storing a Selcall Name or ID number 1. Briefly press the ID/CAL button. The CALL TO mode will be selected and the last-sent Selcall memory location will be displayed. 2. Rotate the Channel knob to select the required Selcall memor y (locations C0 to C9). If no ALPHA name or ID number has been programmed for that memory, the radio will display ‘- - - - -’ otherwise it will display the last ALPHA name or NUMERIC code programmed into that memory. 3. With the r


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 Oricom UHF200 Manuel d'utilisation Radio maritime 2
2 Acu-Rite #01088 Manuel d'utilisation Radio maritime 0
3 Acu-Rite 02010CDI Manuel d'utilisation Radio maritime 2
4 Acu-Rite 972 Manuel d'utilisation Radio maritime 0
5 Acu-Rite #02036WB Manuel d'utilisation Radio maritime 6
6 Acu-Rite 01502BPDI Manuel d'utilisation Radio maritime 0
7 AcuRite Chaney Instrument Company250 Manuel d'utilisation Radio maritime 0
8 Adam Equipment CBC SERIES Manuel d'utilisation Radio maritime 0
9 ADI Systems AT-201 Manuel d'utilisation Radio maritime 239
10 AEG Powertools 8000011647 BAL en Manuel d'utilisation Radio maritime 1
11 Albrecht AE-540 Manuel d'utilisation Radio maritime 47
12 Ambient Devices WS-0100 Manuel d'utilisation Radio maritime 5
13 Ambient Devices WS-0202 Manuel d'utilisation Radio maritime 0
14 Aiphone MC-60/4B Manuel d'utilisation Radio maritime 0
15 Aiphone NA-T/A Manuel d'utilisation Radio maritime 0