Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
VHF FM TRANSCEIVER
TK-7100
UHF FM TRANSCEIVER
TK-8100
© B62-1778-00 (K,M,M2)
09 08 07 06 05 04 03 02 01 00
Résumé du contenu de la page N° 2
THANK YOU! We are grateful you chose KENWOOD for your personal mobile applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. MODELS COVERED BY THIS MANUAL The models listed below are covered by this manual: • TK-7100: VHF FM Transceiver • TK
Résumé du contenu de la page N° 3
One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply
Résumé du contenu de la page N° 4
CONTENTS UNPACKING AND CHECKING CODE SQUELCH (ID CODE)....... 14 EQUIPMENT................................... 1 RECEIVING .................................. 14 SUPPLIED ACCESSORIES.................. 1 TRANSMITTING ............................. 14 PREPARATION ............................... 2 SELECTIVE CALL ........................ 15 TOOLS REQUIRED........................... 2 RECEIVING .................................. 15 POWER CABLE CONNECTION ............ 2 TRANSMITTING .....................
Résumé du contenu de la page N° 5
UNPACKING AND CHECKING EQUIPMENT Note: The following unpacking instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. SUPPLIED ACCESSORIES Item Part Number Quantity KX MC-30 Microphone (K type onl
Résumé du contenu de la page N° 6
PREPARATION Various electronic equipment in your vehicle may malfunction if they are not properly protected from the radio frequency energy which is present while transmitting. Electronic fuel injection, anti-skid braking, and cruise control systems are typical examples of equipment that may malfunction. If your vehicle contains such equipment, consult the dealer for the make of vehicle and enlist his/her aid in determining if they will perform normally while transmitting. Note: The following
Résumé du contenu de la page N° 7
INSTALLING THE TRANSCEIVER For passenger safety, install the transceiver securely, using the supplied mounting bracket, so the transceiver will not break loose in the event of a collision. 1 Mark the position of the holes in the dash by using the mounting bracket as a template. Drill the holes, then attach the mounting bracket using the supplied self-tapping screws. • Be sure to mount the transceiver in a location where the controls are within easy reach of the user and where there is sufficien
Résumé du contenu de la page N° 8
ORIENTATION FRONT PANEL qwe r i u y t q q q q q (Power) switch Press to switch the transceiver ON. Press and hold for approximately 1 second to switch the transceiver OFF. w w w w w VOL / keys (left side) Press to increase or decrease the volume level. e e e e e Display Refer to page 5. r r r r r CH / keys (right side) Press to increase or decrease the channel number. t t t t t MON / SCN / ● / O keys PF (Programmable Function) keys. Press each key to activate its programmable function (pag
Résumé du contenu de la page N° 9
DISPLAY Indicator Description Appears while transmitting. Appears when trunking is activated. Appears while monitoring the selected channel (squelch is OFF). Appears when making a call using Code Squelch or Selective Call. Appears and blinks when receiving a Code Squelch call. Appears while scanning. Appears when the AUX port has been activated. Appears while using the Talk Around function. The selected channel is set as a Priority channel. The selected channel is added to the scanning sequence.
Résumé du contenu de la page N° 10
PROGRAMMABLE AUXILIARY FUNCTIONS The MON, SCN, ● , and O keys can be programmed with the functions listed below: • AUX Press to activate the auxiliary port. Press again to deactivate the auxiliary port. Auxiliary is used with optional boards, allowing you to activate and deactivate these optional functions. While activated, the AUX icon appears on the display. • CH Direct Press and hold for 2 seconds to store the currently selected channel as the Direct Channel. Press at any time to immediat
Résumé du contenu de la page N° 11
• Monitor Press momentarily to turn the transceiver signalling OFF. Press again to return to normal operation. Also, press and hold for 1 second to unmute the speaker. Press again to return to normal operation. Refer to page 18 for details. • None No function is programmed onto the key. • Operator Selectable Tone (OST) Press to enter OST (Operator Selectable Tone) Select mode. Press again to exit OST Select mode. Refer to page 18 for details. • Scan Press to begin scanning the transceiver
Résumé du contenu de la page N° 12
BASIC OPERATIONS SWITCHING POWER ON/ OFF Press the switch to switch the transceiver ON. •A beep sounds and “ ” appears momentarily. • If the Radio Password function is programmed, “ ” will appear on the display when the power is turned ON. Refer to “Radio Password”, below. Press and hold the switch for approximately 1 second to switch the transceiver OFF. ■ Radio Password To unlock the transceiver, enter the password as described below. The password can contain a maximum of 6 digits. To ente
Résumé du contenu de la page N° 13
SELECTING A CHANNEL Press the CH key (right side) to increase the channel number. Press the key (right side) to decrease the channel number. SELECTING A GROUP If Group Up or Group Down has been programmed onto a key, press the Group Up or Group Down key to select your desired group. If a trunking group is selected, the icon appears on the display. Note: You cannot select a trunking group unless Group Up or Group Down has been programmed. TRANSMITTING Note: Before transmitting, first monito
Résumé du contenu de la page N° 14
SCAN Scan is useful for monitoring signals on the transceiver channels. While scanning, the transceiver checks for a signal on each channel and only stops on a channel if a signal is present. The transceiver will remain on a busy channel until the signal is no longer present. When the signal “drops out”, the transceiver will remain on the channel momentarily before scan resumes. This delay time is programmed by your dealer. If a signal is received during the delay time, the transceiver will
Résumé du contenu de la page N° 15
DELETE FROM SCAN/ ADD TO SCAN Depending on how your transceiver has been set up, a key may have been programmed with the Del/Add function. This function allows you to scan only those channels which you desire. To temporarily remove (or add) a channel from the Scan list, press and hold the Del/Add key for approximately 1 second during Scan, while Scan is paused on the undesired (or desired) channel, to temporarily remove (or add) that channel from the scanning sequence. After switching the Scan
Résumé du contenu de la page N° 16
DTMF CALLS Note: To make DTMF calls, you must have an optional microphone with a DTMF keypad (KMC-32). STORE & SEND 1 Enter the desired digits on the microphone keypad. •You can enter a maximum of 16 digits (0 ~ 9, A ~ D, , and #). • The digits appear on the display as you enter them. • If Keypad Auto-PTT is enabled by your dealer, this method of entering a string of digits will not function. Refer to “MANUAL DIALLING”, below. 2 Press the PTT switch to transmit the entered digits. MANUAL DIALL
Résumé du contenu de la page N° 17
DIALLING STORED DTMF NUMBERS 1 Press the microphone key. •“ ” appears on the display. 2 Enter the desired memory location number (1 ~ 9). • The digits stored in the selected location number appear on the display. •To cancel, press any key other than the PTT switch. 3 Press the PTT switch. • If programmed by your dealer, no DTMF tone will sound when “D” is transmitted. “D” is used for a pause time. The pause duration is programmed by your dealer. CLEARING STORED DTMF NUMBERS 1 Press the micropho
Résumé du contenu de la page N° 18
CODE SQUELCH (ID CODE) Code Squelch is enabled or disabled by your dealer. This function turns the transceiver squelch OFF only when it receives the DTMF ID code that has been set up in your transceiver. Transceivers that do not transmit the correct code will not be heard. Consequently, you can communicate with a specific party without listening to other parties using the same channel. Your dealer may also activate Group Call for your transceiver. This is useful when you want to send informa
Résumé du contenu de la page N° 19
SELECTIVE CALL Selective Call is enabled or disabled by your dealer. This function is similar to Code Squelch (page 14). The differences from Code Squelch are: •You can send or receive Status codes containing up to 5 digits. • Selective Call opens the squelch only when the transceiver receives a predetermined DTMF code in the correct sequence (3-digit or 4-digit ID code — 1-digit Intermediate code — Status code of up to 5 digits). Your dealer may also activate Group Call for your transceiver.
Résumé du contenu de la page N° 20
EMERGENCY OPERATION There are two Emergency Operation modes: Emergency Operation 1: The transceiver is programmed to automatically transmit an emergency code to the base station. This code is repeatedly transmitted until the base station acknowledges your emergency situation or you exit Emergency Operation 1. Emergency Operation 2: The transceiver is programmed to automatically activate the function attached to its control function port, such as the vehicle horn or headlights. If attached to
