Résumé du contenu de la page N° 1
308068 (1) 27/4/04 12:26 pm Page 1.1
Hawk
CODES
308A 312A
(Push) (Auto Drive)
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 308A001001, 312A001001 HANDBOOK: 308068 (REV .1.)
ISSUE 21.04.04
Résumé du contenu de la page N° 2
308068 (1) 27/4/04 12:26 pm Page 1.2 MAIN FEATURES /SPECIFICATIONS Main Features 1 Handlebar. 2 Ground Drive Clutch Lever (312 Only). 1 3 Grassbag Assembly. 14 2 4 Rear Deflector. 5 Serial Number Decal. 13 6 Oil Filler Cap and Dipstick. 7 Height of Cut Adjuster. 8 Spark Plug Lead. 9 Primer Bulb. 12 10 Fuel Filler Cap. 11 11 Handlebar Securing Knob. 12 Rope Guide. 13 Engine Start-Grip. 14 Engine Stop lever. 3 15 Air Cleaner. 10 15 16 Height of Cut Indicator. 4 9 6 5 8 7 16 1D30800B Specificati
Résumé du contenu de la page N° 3
308068 (1) 27/4/04 12:26 pm Page 1.3 1ST Year (12 months) 1ST Year (12 months) Owner s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) 2nd Year (24 months) Owner s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your
Résumé du contenu de la page N° 4
308068 (1) 27/4/04 12:26 pm Page 1.4
Résumé du contenu de la page N° 5
308068 (1) 27/4/04 12:26 pm Page 1.5 CONTENTS 1.2 Main Features/Specifications 1.22 - Oil Service 1.22 - Air Cleaner Service 1.5 Contents 1.23 - Spark Plug Service 1.23 - Keeping Engine Clean 1.6 Introduction 1.23 - Grassbag 1.24 - Deck Housing 1.7 Warranty 1.24 - Securing Nuts and Bolts 1.24 - Clutch Cable Adjustment 1.8 - 1.11 Safety Precautions 1.25 - Lubrication 1.25 - Cutterblade Removal 1.11 Safety Symbols 1.26 - Cutterblade Assembly 1.11 Decal Symbols 1.26 - Cutterblade Sharpening 1.
Résumé du contenu de la page N° 6
308068 (1) 27/4/04 12:26 pm Page 1.6 INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls an
Résumé du contenu de la page N° 7
308068 (1) 27/4/04 12:26 pm Page 1.7 WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of t
Résumé du contenu de la page N° 8
308068 (1) 27/4/04 12:26 pm Page 1.8 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. E
Résumé du contenu de la page N° 9
308068 (1) 27/4/04 12:26 pm Page 1.9 SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confi
Résumé du contenu de la page N° 10
308068 (1) 27/4/04 12:26 pm Page 1.10 SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before clea
Résumé du contenu de la page N° 11
2 4 6 308068 (1) 27/4/04 12:26 pm Page 1.11 SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves w
Résumé du contenu de la page N° 12
308068 (1) 27/4/04 12:26 pm Page 1.12 ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Grassbag. To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Hold the engine stop lever in towards the ha
Résumé du contenu de la page N° 13
308068 (1) 27/4/04 12:26 pm Page 1.13 STARTING THE MOWER BEFORE Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance S
Résumé du contenu de la page N° 14
308068 (1) 27/4/04 12:26 pm Page 1.14 OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Starting - Step 1 Operate the primer bulb: Note: Push on the primer bulb 5 times at CS117 two second intervals to provide the extra fuel to start the engine after assembling the mower for the first time. In normal use push on the primer bu
Résumé du contenu de la page N° 15
308068 (1) 27/4/04 12:26 pm Page 1.15 OPERATING THE MOWER Forward Travel (Autodrive Only) Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas. If the engine stop lever is released the engine will stop. Turning To make a wide turn steer the mower with the handlebar in the direc- tion required. To make a tight turn rel
Résumé du contenu de la page N° 16
308068 (1) 27/4/04 12:26 pm Page 1.16 OPERATING THE MOWER Slopes To prevent engine damage do not use the mower on slopes greater than 20 degrees. Height of Cut Hold the trigger against the handle and raise or lower the mower using the handle to achieve the desired height of cut. Release the trigger to secure the mower at the required position. There are seven height of cut positions. The setting is indicated by the position of the connecting rod relative to the height of cut indicator. Always
Résumé du contenu de la page N° 17
308068 (1) 27/4/04 12:26 pm Page 1.17 OPERATING THE MOWER Without Grass Collection Remove the grassbag and operate the mower with the rear deflector in the closed position. Heavy Growth Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce
Résumé du contenu de la page N° 18
308068 (1) 27/4/04 12:26 pm Page 1.18 LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The f
Résumé du contenu de la page N° 19
308068 (1) 27/4/04 12:26 pm Page 1.19 LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sa
Résumé du contenu de la page N° 20
308068 (1) 27/4/04 12:26 pm Page 1.20 MAINTENANCE SCHEDULE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Follow the hourly or calendar intervals, whichever occurs first. More fre- quent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours
