Instruction d'utilisation Dixon 312

Résumé du contenu de la page N° 1

DIXON INDUSTRIES. INC. A
BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 67337 0945
316 251 2000
FAX 316 251 4117


TECHNICAL DATA
ZTR Model 312
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3934
from transaxle backing plate, raise
and push body and seat assembly
forward.
2. Loosen four seat adjustment knobs P/
N 1849 and slide seat forward or
backward to desired pos

Résumé du contenu de la page N° 2

REMOVING THE BODY 1. The 312 has a two-piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle. 2. To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N 4761 at plug-In. 3. Reverse above procedure to reinstall. ADJUSTMENT OF MOWER DECK DRIVE BELT 1. This mower deck drive belt

Résumé du contenu de la page N° 3

MOWER BLADE OPERATION To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To Disengage mower blades, turn lever slowly to the "OFF" position. SAFETY CHECKS IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS • ' • ' - ' • • ••' * 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should not start. If engi

Résumé du contenu de la page N° 4

312 BODY ASSEMBLY

Résumé du contenu de la page N° 5

Résumé du contenu de la page N° 6

312 CHASSIS ASSEMBLY

Résumé du contenu de la page N° 7

312 TRANSAXLE ASSEMBLY

Résumé du contenu de la page N° 8

312 MOWER DECK ASSEMBLY 30'

Résumé du contenu de la page N° 9

312 WIRING ASSEMBLY