Résumé du contenu de la page N° 1
OPERATORS MANUAL
Résumé du contenu de la page N° 2
IMPORTANT - READ CAREFULLY The Dixon ZTR Mower is both easy and fun to operate. However, any power mower must be operated @ properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operator's manual carefully, and become completely familiar with the controls. The information in this operator's manual applies to your Di xon® ZTR® Model ZTR 1001 Mower. Your Dixon dealer will gladly provide operating instructions and answer any questions. See
Résumé du contenu de la page N° 3
INDEX SAFETY.................................................................Pages 1 - 6 WARRANTY POLICY ............................................ Page 7 SPECIFICATIONS ................................................. Page 8 CONTROLS...........................................................Pages 9-12 OPERATION INSTRUCTIONS .............................. Pages 13-18 CARE AND MAINTENANCE .................................Pages 19 -26 STANDARD SERVICE PARTS LIST...................... P
Résumé du contenu de la page N° 4
SAFETY LA WNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH The most common causes of injury to the operator or bystander... THROWN OBJECTS UPHILL BLADE CONTACT DOWNHILL Page 1
Résumé du contenu de la page N° 5
SAFETY SAFETY SYMBOLS: SAFETY ALERT SYMBOL - When you see this symbol, BE ALERT to the potential for injury. Follow recommended safety precautions and safe operating practices. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. , Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Caution indicates a potentially hazardous situation which, if
Résumé du contenu de la page N° 6
SAFETY This cutting mower is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION: • Read, understand, and follow all instructions in the manual and on the mower before starting. • Only allow responsible adults, who are familiar with the instructions, to operate the mower. • Clear the area of objects such as rocks, toys, wire, etc., which could be picked u
Résumé du contenu de la page N° 7
SAFETY SLOPE OPERATION: Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. DO Mow across the slope with your Dixon ZTR - never up or down. Remove obstacles such as rocks, tree limbs, etc. Watch for holes, ruts or bumps. Uneven terrain could overturn the mower. Tall grass can hide obstacles. Use slow speed. Use extra care with grass catchers or other attachments. These can c
Résumé du contenu de la page N° 8
SAFETY CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. • Keep children out of the mowing area and under the watchful care of another responsible adult. • Be alert and turn mower off if a child enters the area. • Before and during backing, look behind and DOWN for small
Résumé du contenu de la page N° 9
SAFETY SERVICE: • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. Use only an approved container. Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. Never refuel the mower indoors. Never store the mower or fuel container inside a building where there is an open flame. • Never run a mower inside a closed area. • Keep nuts and bolts, especially blade attachment b
Résumé du contenu de la page N° 10
DIXON LIMITED WARRANTY POLICY - MODEL ZTR 1001 This warranty policy applies to all 1001 walk behind mowers purchased on or after September 1,1996.. WARRANTY: Dixon Warranty term is for a period of one (1) year from date of purchase or 200 hours of use, whichever occurs first. Mowers used for residential homeowner applications (used only at owner's primary place of residence) are warranted for two (2) years from date of purchase or 200 hours of use, whichever occurs first. DIXON ZTR MOWERS
Résumé du contenu de la page N° 11
SPECIFICATIONS Model ZTR 1001 CHASSIS: The monocoque design chassis of the Model ZTR 1001 incorporates CMC laser and CNC brake processes to form the twin 12 gauge side frames and 7 gauge transmission and engine base plate. BODY: The front body cover is made of rotational molded polyethylene. Front body contains access panel for battery service. MOWER DECKS: Cut height approximately 1" to 4" via 7 position lift handle. Each deck is stamped steel construction: 42"-13 gauge 3 50"
Résumé du contenu de la page N° 12
CONTROLS The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning, speed, and direction. On initial operation, set throttle speed on slow and operate with mower blade "OFF". To avoid "over-controlling" the mower, use a light touch on the drive levers. Slight movements are all that is necessary. All controls are described from operators position: PARKING BRAKE: The parking brake used on the Model ZTR 1001 is designed to hold the mower from
Résumé du contenu de la page N° 13
CONTROLS TRANSMISSION DRIVE SYSTEM: Allows the mower to turn on its own axis (zero turning radius). Each lever controls one side of the mower. NOTE: The pressure required to operate the mower is very light. A minimum of 1/2 hour should be spent simply driving the mower without the blade drive engaged. TO GO FORWARD: From neutral position, gently push both drive control levers downward or forward. To increase speed, move levers farther downward or forward. FORWARD TO GO B
Résumé du contenu de la page N° 14
CONTROLS TURNING: Turning is controlled by moving one drive control lever slightly up or down, forward or rearward of the other. To turn left, move left control lever up while pushing downward on the right control lever. To turn right, move right control lever up while pushing downward on the left control lever. To turn on mower's own axis 'Zero Turning Radius' stop and move one lever to reverse or up position and the other to forward or downward position. >,- • . 90° RIGHT T
Résumé du contenu de la page N° 15
CONTROLS BLADE DRIVE: Located on control panel above and to operators right. To engage the mower blades, release parking brake by moving brake bail downward until catch stop latch is fully engaged. Grasp left control handle grip with enough pressure to depress built in safety switch. If constant pressure is not maintained on either handle grip when blade drive is engaged, engine will stop. Using right hand, lift blade drive switch up and push forward. To disengage blades, pull sw
Résumé du contenu de la page N° 16
OPERATION INSTRUCTIONS The safe and successful operation of the Model ZTR 1001 will depend upon the operator having the correct knowledge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone to operate the mower without complete knowledge of all controls and their functions. During initial operation, set throttle at slow speed. Sound judgement by the owner will prevent accidents. BEFORE OPERATING MOWER: 1. Read engine manufactu
Résumé du contenu de la page N° 17
OPERATION INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMS: PARKING BRAKE SWITCH TEST: With parking brake bail locked moved downward and locked into the catch stop, engine should not turn over or attempt to start when the key switch is moved to the start position. BLADE DRIVE SWITCH TEST: NOTE: Each drive control lever is fitted with an OPERATOR PRESENCE switch. a. With electric blade drive switch turned ON, engine should not turn over or attempt to start when key swit
Résumé du contenu de la page N° 18
OPERATION INSTRUCTIONS STARTING INSTRUCTIONS: 1. Grasp parking brake bail handle with one hand while releasing catch mechanism located mid-point between the control handles. 2. Move throttle control to choke position if engine is cold, full throttle if warm. 3. Insert ignition key and turn to start position. When engine starts, release ignition key. Key will return to run position. 4. Move throttle from choke to desired speed position. NOTE: While mowing, "blade(s) engag
Résumé du contenu de la page N° 19
OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it i s not possible to hide all of the recycled or mulched clippings. In order to achieve the best results, please read and follow the mulching tips listed below: 1. Set the engine speed control to the wide open or full setting. 2. P
Résumé du contenu de la page N° 20
OPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT: In order to achieve optimum performance when mowing with a grass catching attachment, please read and follow the tips listed below. 1. Set engine speed control to the wide open or full setting. 2. Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog both the underside of the deck and the attachment chutes. Empty bags often to prevent plugging. 3. If the grass is tall, place the mower deck cut height selec
