Résumé du contenu de la page N° 1
OWNER'S MANUAL
MODELNO.WE14542K
14.5HP42 Inch
LawnTractor
• Assembly
• Operation
Customer Responsibilities
• Service and Adjustme _n_ _
• Storage
• Troubleshootin_
• Repair Parts
For Parts and Service, contact our authorized distributor: call 1-800-849-1297
For Technical Assistance: call 1-800-829-5886
WEED EATER
174196 1.28.00 RE)
PRINTED IN U.S.A.
Résumé du contenu de la page N° 2
SAFETY RULES i_ Safe Operation Practices for Ride-On Mowers i_ IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERALOPERATION DO NOT: • Read, understand, and follow all instructions in the • Do not turn on slopes unless necessary, and then, turn manual and on the machine before starting. slowly and gradually downhill, if possible. • Do not mow near drop
Résumé du contenu de la page N° 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers • .- Be sure the area is clear of other people before mowing. Stop Look for this symbol to point out important machine if anyone enters the area. safety precautions. It means CAUTIONIff Never carry passengers or childr_en even with the blacles off. BECOME ALERT!!! YOUR SAFETY IS IN- • Do not mow in reverse unress absolutely necessary. Always J VOLVED. look down and behind before and while backing. Never carry children. They may fall off an
Résumé du contenu de la page N° 4
PRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIES GASOLINE CAPACITY 1.25 GALLONS • Read and observe the safety rules. AND TYPE: UNLEADED REGULAR • Followa regular scheduleinmaintaining, caring forand using your tractor. OIL TYPE (API-SF/SG/SH): SAE 30 (above 32°F) • Follow the instructions under "Customer Responsibili- SAF 5W-30 (below 32°F) ties" and "Storage" sections of this owner's manual• OIL CAPACITY: 3 PINTS CONGRATULATIONS on yourpurchaseof a newtractor. It has been designed, engineered a
Résumé du contenu de la page N° 5
UNASSEMBLED PARTS Steering Wheel Seat Wheel Steering , _ , .Adapter (1) Shoulder Bolt 5/16-18 Steering (1) Washer I I Extension 17/32 x 1-3/16 x 12 Gauge Wheel U Shaft Steering (1) Lock Insert Washer 1/2 (1) Bolt Steering Boot (1) Lockwasher 3/8 (1) Locknut 5/16-18 (1) Large Flat Washer Keys (1) Hex Bolt 3/8-16 x 1 (2) Keys Slope Sheet 5/16-18 x 1-1/4 (t) Hex Bolt 5
Résumé du contenu de la page N° 6
ASSEMBLY Your new tractor has been assembled at the factory withexception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed, (1) 5/16" wrench Pliers (2) 7_'16"wrenches Tire pressure gauge (2) 1/2" wrenches Ut
Résumé du contenu de la page N° 7
ASSEMBLY INSTALL SEAT (See Fig. 3) HOW TO SET UP YOUR TRACTOR Adjust seat before tightening adjustment bolt. CHECK BA'B'ERY (See Fig. 2) Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat Lift seat pan to raised position and open battery box to tractor• door. • Pivot seat upward and remove fror_ the cardboard • If this battery is put into service after month and year packing. Remove the cardboard packing and discard. indicated on label (l
Résumé du contenu de la page N° 8
ASSEMBLY TO DRIVE TRACTOR OFF SKID (See Opera- / CHECKL IS T tion section, page 10, for location and func- BEFORE YOU OPERA TEAND ENJOY YOUR NEW TRAC- tion of controls) TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCEAND SATISFACTION FROM THIS &WARNING: Before starting, read, understand and follow QUALITYPRODUCT. .. all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in PLEASE REVIEW THE FOLLOWING CHECKLIST: front o
Résumé du contenu de la page N° 9
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. =, I BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARN!NG ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP "_ LIGHT ! I I FUEL CHOKE MOWER HEIGHT PARKING BRAKE UNLOCKED MOWER LIFT LOCKED R N H ATTACHMENT REVERSE NEUTRAL HIGH LOW PARKING BRAKE CLUTCH ENGAGED KEEP AREA CLEAR SLOPE HAZARDS ATTACHMENT IGNITION CLUTCH DISENGAGED (SEE SAFETY RULES SECTION) FREE WHEEL
Résumé du contenu de la page N° 10
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations withyour tractor tofamiliarize yourself withthe locations of variouscontrols and adjustments• Save this manual for future reference• ATTACHMENT IGNITION CLUTCH SWITCH LEVER "- .... "- LEVER PLUNGER THROTTLEICHOKE i t ATTACHMENT LIFT LEVER CONTROL_ /_ , ,,J i ' IXl CLUTCH/BRA PEDAL _ MOWER DECK HEIGHT ADJUSTMENT POSITIONS GEARSHIFT LEVER-- PARKING BRAKE \ FIG. 4 Our tracto
Résumé du contenu de la page N° 11
OPERATION I The operation of any tractor can result inforeign objects thrown into the eyes, which can I result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. I IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY POSITION OTHER THAN "OFF" WILLCAUSETHE BATTERY HOW TO USE YOUR TRACTOR TO BE DISCHARGED, (DEAD). TO SET PARKING BRAKE (See
Résumé du contenu de la page N° 12
OPERATION TO TRANSPORT TO OPERATE MOWER (See Fig. 6) • Raiseattachmentlitttohighestpositionwithattachment Your tractor isequipped withan operator presence sensing lift control. switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will • When pushing or towing your tractor, be sure gearshift shut off the engine. lever is in neutral (N) position. • Select desired height of cut. • Do not push or tow tractor at more than'five (5) MPH. • Star
Résumé du contenu de la page N° 13
OPERATION MOWING TIPS TO START ENGINE (See Fig. 5) • Tire chains cannot be used when the mower housing is When startingthe engine forthe first time or ifthe engine has attached to tractor. run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in • Sit on seat in operating position, depress clutch/brake the Service and Adjustments sectior_ of 1his manual. pedal and set
Résumé du contenu de la page N° 14
CUSTOMER RESPONSIBILITIES MAINTENANCE SC.EDULE AS YOU COMPLETE Check Tire Pressure V' , _ I " Check Operator Presence and / T I Interlock Systems V _" R Check for Loose Fasteners ik/ j V'7 If Sharpen/Replace Mower B_ades . 1_4 Lubrication Chart _ V s _:_1 Check Batte,:y Level Clean Battery and Terminals if Check Transaxle Cooling V' Adjust Blade Belt(s) Tension V_s Adjust Motion Drive Belt(s) Tension V'5 Check Engine Oil Level V' V' Change Engine Oil I_12.:. V F E Clean Air Filter V_: U Clean Ai
Résumé du contenu de la page N° 15
CUSTOMER RESPONSIBILITIES TRACTOR TRAILING MANDREL EDGE UP ASSEMBLY Always observe safety rules when performing any mainte- nance. CENTER BRAKE OPERATION Iftractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJU ST BRAKE"in the Service and AdjL_stments LOCK WA_ section of this manual). TIRES " • • Maintain proper air pressure in alltires (See"PRODUCT SPECIFICATIONS" section of this manual). • Keep tires free of gasoline,
Résumé du contenu de la page N° 16
CUSTOMER RESPONSIBILITIES NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) BATTERY improve starting in cold weather, these multi-viscosity oils Your tractor has a battery charging system which is suffi- will result in increased oil consumption when used above cient for normal use. However, periodic charging of the 32°F. Check your engine oil level more frequently to avoid battery with an automotive charger will extend its life. possible engine damage from running low on oil. • Keep battery
Résumé du contenu de la page N° 17
CUSTOMER RESPONSIBILITIES CLEAN AIR SCREEN (See Fig. 12) AIR FILTER (See Fig. 13) Air screen must be kept free of dirt and chaff to prevent Your engine will notrunproperly usinga dirty airfilter. Clean engine damage from overheating. Clean witha wirebrushor the foam pre-cleaner after every 25 hours of operation or compressed airto removedirt and stubborndried gum fibers. every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first. ENGINE COOLING FIN
Résumé du contenu de la page N° 18
CUSTOMER RESPONSIBILITIES MUFFLER CLAMP Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage, SPARK PLUGS CLAMP Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever FUEL _ FILTER occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual. FIG. 14 IN-LINE FUEL FILTER (see Fig. 14) The fuel filter should be replaced once each season.
Résumé du contenu de la page N° 19
SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR Disconnect front links from deck by removing ret
Résumé du contenu de la page N° 20
SERVICE AND ADJUSTMENTS TO LEVEL MOWER HOUSING • When distance "D" is 1/8" to 1/2" lower at front than rear, tighten nuts "F" against trunnion on both front links. Adjust the mower while tractor is parked on level ground or To raise front of mower, loosen nut"E"from trunnion on driveway. Make su re tires are properly inflated (See"PROD- both front links. Tighten nut "E" on both front links an UCT SPECIFICATIONS" section of this manual). Iftiresare equal number of turns. over or underinfiated, yo
