Résumé du contenu de la page N° 1
OWNER’S
MANUAL
MODEL NO.
T1260
T1360
60” UNIVERSAL
TRAILMOWER
Assembly
Operation
Service and Adjustment
Rev.10.06.1997
Repair Parts
Made In The
P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE 816-747-8183 FAX 816-747-8650
Manufacturing quality lawn care equipment since 1945
USA
Résumé du contenu de la page N° 2
1 LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separa
Résumé du contenu de la page N° 3
• Exercise special care when mowing Safety Rules around fixed objects in order to prevent the blades from striking them. Never Safe Operation Practices for Trailmowers deliberately run mower onto or over any foreign object. • Important: This cutting machine is capable of Use mower only as the manufacturer amputating hands and feet, and throwing intended and as described in the manual. • Do not operate the mower if it has been objects. Failure to observe safety dropped or damag
Résumé du contenu de la page N° 4
• Watch for holes, ruts or bumps. Uneven IV. Service terrain could overturn the machine. Tall • grass can hide obstacles. Use extra care handling gasoline and other • Use slow speed. Choose a low gear so fuels. They are flammable and vapors are that you will not have to stop or shift explosive. while on the slope. o Use only an approved container. • Keep all movement on the slopes slow o Never remove gas cap or add fuel and gradual. Do not make sudden with the engine running.
Résumé du contenu de la page N° 5
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. 42 Warning Decal 43 Danger Decal 5
Résumé du contenu de la page N° 6
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. 44 Caution Decal 47 No Step Decal 45 Danger Decal 48 Blade Decal 46 Speed Decal 49 Engine Power Decal 6
Résumé du contenu de la page N° 7
Operating Your New Mower The operation of any mower can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your mower and while mowing. We recommend wide vision safety mask for over the spectacles or standard safety glasses. Caution: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to the machine and the mowing activity. N
Résumé du contenu de la page N° 8
Caution: Caution: Shut off mower and remove Shut off mower and remove spark plug wire before making spark plug wire before making any adjustments to the mower. any adjustments to the mower. Cutting Height Adjustments • Rotate height adjust crank handles (item #8 Tow Hitch Offset Assembly and #5 in fig. 4) in a clockwise direction to • Please refer to figure 2 for the assembly of raise the mower and in a counter-clockwise the hitch bar. direction to lower.
Résumé du contenu de la page N° 9
Breaking in Your Mower Suggested Mowing Practices • Break in your belts, pulleys, and engine before you Mowing should be started with tractor in low actually begin mowing. gear and speed increased only as mowing • conditions will safely permit. This speed Start engine, engage blade control to start blades rotating and allow blades to rotate for should not exceed 3-1/2 MPH. • approximately five minutes to break in mower Better mowing results will be obtained in and engine. grassy are
Résumé du contenu de la page N° 10
Mower Maintenance General Recommendations • To remove blade for sharpening, use wooden The warranty on this Trailmower does not cover items block to hold blade while removing the blade- that have been subjected to operator abuse or mounting nut. The nuts have right hand negligence. To receive full value from the warranty, threads. operator must maintain unit as instructed in this • When grinding, care should be taken to manual. maintain blade balance and the blade should be
Résumé du contenu de la page N° 11
A108 6104 – L&R 687 - CTR 6104RS B104W B98 Brown B99 – L&R B9960 – CTR M S B Green Kill Left – B100S G L Key Switch Right – B100RS Center – B100 CS Battery Red Black Red B98 Red To Alternator B98W B108LB Solenoid B102 Red 660S B102 T60 12V Start Figure 3 B108 Blade Drive Assembly Figure 1 H11 H11 H10 661 H11 H11 662 661A Hitch Bar Assembly Figure 2 11
Résumé du contenu de la page N° 12
04 02 03 05 06 01 07 08 52 53 09 08 10 11 12 13 14 15 Figure 4 12
Résumé du contenu de la page N° 13
16 19 17 18 20 21 22 16 23 21 20 24 24 25 26 Figure 5 13
Résumé du contenu de la page N° 14
28 27 27 18 22 23 27 27 28 29 Figure 6 14
Résumé du contenu de la page N° 15
15
Résumé du contenu de la page N° 16
Item # Description Part # 1 Grass Chute CH5 Bolt/Nut CH5B Spring CH5S 2 Tire/Wheel/Bearing F4157W 3 Right Belt Guard 6155RN Acorn Nut FR154N 4 Battery Cable Red BCSR Battery Cable Black BCS 5 Height Adjust Crank H7N Plastic Bushing T2PB Threaded Link 674S Cotter Pin T218C Knob H7K 5/16 Pal Washer NB117 6 Left Belt Guard 6155LN Acorn Nut FR154N 7 Gas Tank 6102T Gas Cap 6102NC Gas Tank Mount 6102N Rubber Bushing AS119 Fuel Shutoff Valve AS120 Fuel Line Hose Clamp 6FLC Fuel Line 6102FLN 8 Height A
Résumé du contenu de la page N° 17
Item # Description Part # 12 Safety Hitch Pin H11 13 Red Safety Rope H9B 14 Blade Engage Tether (Black) BT44 15 Blade Engage Lever T60 BEA60 Engage Bushing 681S Bolt/Nut 681B Lever 681N Lever Knob B19 Rod Spring B25RT 16 Belt 66LR 17 Key Switch KS12 18 Blade Driver Center B99CCS (for list see fig 1) 19 Throttle 686 20 Idler Bracket 678 21 Idler Pulley B527 22 Blade Driver Right B99RS 23 Blade Driver Left B99LS 24 Idler Rod/ Spring B25R6 25 Idler Pulley B527 Engine Idler Bracket 681N 26 Engine Be
Résumé du contenu de la page N° 18
Item # Description Part # 39 Bearing, Flanged 3/4 ID CB58 40 Bearing, Flanged 5/8" ID 1 3/8"OD F157B 41 Blade Bearing B98 Decals and Labels 42 Warning Decal D30 43 Danger Decal D29 44 Caution-Deflector Decal D36 45 Caution Hand Decal D20 46 Speed Decal D33 47 No Step Decal D11 48 Blade Engage Decal D10 49 Engine Power Decal D28 50 Swisher Logo D32 51 Made In Missouri Decal D31 Additional Components 52 Engine Plate 6155NF 53 Throttle Plate 6155TH 18
Résumé du contenu de la page N° 19
Notes 19
Résumé du contenu de la page N° 20
60” UNIVERSAL TRAILMOWER OWNER’S MANUAL Each mower has its own model number. Each engine has its MODEL NO. own model number. The model number for the mower will be found on the right hand side of the drive belt housing. The T1260 model number for the engine will be found on the top of the blower fan housing. All mower parts listed herein may be ordered directly from T1360 Swisher Mower & Machine Co. Inc. or your nearest Swisher dealer. All engine parts may be ordered from the nearest dealer
