Résumé du contenu de la page N° 1
www.swisherinc.com
OWNER’S
MANUAL
MODEL NO.
T1360B1
T1360T
T1360H
T1360K
60” FINISH CUT
T13560
RK1360
TRAILMOWER
T17560
IMPORTANT
Assembly
Read and follow all
Safety Precautions
and Instructions Operation
before operating this
equipment.
Service and Adjustment
Rev: 04-127
Repair Parts
Made In The
P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE 660-747-8183 FAX 660-747-8650
Manufacturing quality lawn care equipment since 1945
USA
ONT602
Résumé du contenu de la page N° 2
1 LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1) Engine Warranty All engines utilized on our products have a separ
Résumé du contenu de la page N° 3
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate this machine safely. • Always di
Résumé du contenu de la page N° 4
• Turn off the blades when not mowing. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the mower if it has been dropped or damaged in any manner or if the mower vibrates excessively. Excessive vibration is an indication of damage. Repair mower as necessary. • Dress properly. Do not operate the mower when barefoot or wearing open sandals. Wear only solid shoes with good tracti
Résumé du contenu de la page N° 5
SAFETY DECALS Replace decals immediately if damaged.Order by part number from Swisher Mowers OD11- No step Decal OD45- Warning Decal OD55- Triangle Danger Decal OD33- Speed Decal OD43- Flying Debris Decal OD29- Danger Decal 5
Résumé du contenu de la page N° 6
662 REQUIRED ASSEMBLY FRONT WHEEL CASTER ASSEMBLY 1. Remove single nut and washers from caster shaft. 2. Place one washer on the shaft of the caster/wheel sub-assembly. 3. Slide same shaft through the bearing/frame with wheel towards the ground. 4. Place the other washer on the shaft; it should be resting on the top bearing. 5. Thread nyloc jam nut onto shaft. 6. Tighten nut snuggly, making sure shaft threads enter the nyloc of the nut. Over- tightening of this nut will bind caster.
Résumé du contenu de la page N° 7
OPERATING YOUR TRAILMOWER The operation of any mower can produce foreign objects to be thrown into the eyes, resulting in severe eye damage. Always wear certified safety glasses or wide-vision safety goggles over spectacles before staring any cutting machine and while operating such a machine. The operation of any cutter produces sound waves that are damaging to the human ear. Ear protection is recommended. CAUTION! Tragic accidents can occur if the opera
Résumé du contenu de la page N° 8
• Make sure the tow vehicle parking brake is set, mower is level, and blades are disengaged. • Check spark plug wire, oil, and fuel. • Check all electrical connections (See Schematics). • Make sure toggle switch is turned “ON” and the red tether is properly attached. • Set engine idle to “CHOKE” position. • With feet clear of mower deck, turn key switch to the “START” position; [ if unit is equipped with 12 volt system ] release when engine begins to run. • For units NOT equipped
Résumé du contenu de la page N° 9
ALTERNATIVE STOPPING METHOD • Bring vehicle to complete stop, shut off engine, and set parking brake. • Disengage blade engage lever (6008). • Manually shut toggle and key switches to their “OFF” positions. • Always remember to remove keys to avoid irresponsible usage. TRANSPORTING MOWER • Stop mower properly. • Place mower deck in its highest position. • If transporting unattached from tow vehicle, then remove spark plug wire and place where it cannot contact the spark plug.
Résumé du contenu de la page N° 10
15 MOWER MAINTENANCE GENERAL RECOMMENDATIONS The warranty on this Trailmower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual. Some adjustments will need to be made periodically to maintain your unit properly. All adjustments in this manual should be checked at least once each season. BEFORE EACH USE • Check engine oil level on a level surface. (Check twic
Résumé du contenu de la page N° 11
NB149 - WASHER IF NECESSARY 19 7 FRAME DETAIL 18 NB177 Outer Blade Driver 17 665TC Configuration EX: 6014TC,6014TK USE PAINT CODE: TC=RED, TK=BLACK 11 8 Blade Driver Assy. 19 9058- 5.75” (Center Shaft) 4 9018- 4.25” (Outer Shafts) 2 7 Item No. Description Part # 10 1 Center Shaft 9054 1 2 Blade Bearing B98 3 Bearing Housing 9057TK 3 Center Blade 4 Pulley Spacer 6065PM 5 Blade Mount Plate 9008 14 Driver 6 20 1/2 ''Blade 9004 2 7 Blade Pulley- 5.5" 6114 Configuration 8 Blade Pulley- 5.5" 6114
Résumé du contenu de la page N° 12
GAS TANK ASSEMBLY TANK ASSEMBLY / UNIT MODEL PART # POL14560B POL14560C RK1360 T13560 #6059 T13560B1 T1360T T17560 T1360B1 T1360H #6059H #6080 T1360K Not shown WASHER [ NB 170] MOWER DECK DETAIL 6027* BELT CONFIGURATION 6044TK 6046 5058 (Long) (Short) TZ2S EX: 6060TC, 6060TK USE PAINT CODE: TC=RED, TK = BLACK 12
Résumé du contenu de la page N° 13
Slide plastic tube snug against toggle switch. HEAT SHIELD 6052TK NOT USED ON HONDA NB199 UNITS NB196 NB207 MOTOR BASE DETAIL 685SP 6013* BELT GUIDE 6066 3/8-16 TWO WAY LOCK NOT H9C USE PAINT CODE: TC=RED, TK=BLACK EX: 6003TC, 6003TK PARTS NOT SHOWN Description Part # WIRING HARNESS [BRIGGS] WHN60B2 WIRING HARNESS [TECUMSEH] WH60T01 BATTERY [ U 1 R ] SOLD SEPARATELY BATTERY CABLE- RED BCSR BATTERY CABLE- BLACK BCLB SOLENOID 9043 BATTERY STRAP BHOLD KEYS KSK BATTERY CABLE BOOTS BCBT WIRING
Résumé du contenu de la page N° 14
ENGINE DETAIL BRIGGS / TECUMSEH > DETAIL - 1 DETAIL - 1 Item No. Description Part # 1 UPPER SPACER 689L 2 5-1/2'' ENGINE PULLY 688 3 1/4/ X 1'' KEY STOCK 9031 4 LOWER SPACER 689S 5 3/8 BELLEVILLE WASHER 699 6 FLAT WASHER TR150W 7 3/8-24 X 1BOLT [BRIGGS ] NB452N 7/16-20 X 1 BLOT [TECUMSEH ] NB238N 8 5/16-18 X 1-3/4 BOLT NB515 9 5/16 USS WASHER NB275 10 5/16-18 Flge NUT NB170 11 BELT GUIDE 6000 12 5/16-18 X 1 1/4 FLG.BOLT NB253 12 13 5/16-18 NYLOCK NUT NB181 8 8 3 1 8 2 6 ENGINE DETAIL 4 KOHLER
Résumé du contenu de la page N° 15
WIRING SCHEMATICS HONDA ENGINES KOHLER ENGINES IGNITION SWITCH BATTERY POSITIVE CABLE 15
Résumé du contenu de la page N° 16
60” FINISH CUT www.swisherinc.com TRAILMOWER OWNER’S HOW TO ORDER REPAIR PARTS: MANUAL Each mower has its own model number. Each engine has its own model number. The model number for the mower will be found on the right hand side of the drive belt housing. The MODEL NO. model number for the engine will be found on the top of the blower fan housing. T1360B1 All mower parts listed herein may be ordered directly from Swisher Mower & Machine Co. Inc. or your nearest Swisher dealer. T1360T All en
