Résumé du contenu de la page N° 1
Safety Instructions & Operator's Manual for
EUROPEAN
21” STEEL DECK
WALK MOWERS
SERIES 19
Models
ERP2187519BV (7800249)
EP2187519BV (7800250)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to ‘Engine Power Rating Information’ for
further details.
Manual No. 7101607 (I.R. 9/4/2007)
TP 100-5282-IR-WB-N
Résumé du contenu de la page N° 2
Thank You for purchasing this quality-built Snapper product. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them. This machine is designed and intended only for finish cutting of established lawns and is not
Résumé du contenu de la page N° 3
Operator Safety Features and Controls Operation Maintenance Troubleshooting Warranties Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Operator Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Decal Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Features and Controls . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 4
Important Operator Safety Instructions ! ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of soun
Résumé du contenu de la page N° 5
Operator Safety Important Operator Safety Instructions (Continued) ! ! Safe Handling of Gasoline Operation (Continued From Previous Page) (Continued From Previous Column) 6. DO NOT fill fuel containers inside a vehicle or on a truck 13. DO NOT operate mower without the entire grass catch- or trailer bed with a plastic liner. Always place the contain- er, rear guard or other safety devices in place and working. ers on the ground away from the vehicle before filling. DO NOT point discharge at peo
Résumé du contenu de la page N° 6
Decal Identification E A Mfg. No. XXXXXXX B WALK BEHIND LAWN MOWER S/N XXXXXXXXXX C XX dB F SIMPLICITY MFG - SNAPPER kg: XX MCDONOUGH, GA 30253 USA kW: X.XX D G XXXX max 2007 H I J (1) Serial Tag: A. Manufacturing (Part) Number F. Unit Mass B. Description/Model Number G. Kilowatts C. Serial Number H. Max RPM’s D. Manufacturer Information I. Year of Manufacture E. Sound Power J. European Certification A C B D (2) Warning Instructions: A. Read, understand and follow instructions and warnings
Résumé du contenu de la page N° 7
Operator Safety Decal Identification (Continued) (3) Engine Speed Control: (4) Speed Selector: Indicates direction to increase engine RPM (hare), decrease Shows direction of motion and the ability to select ground engine RPM (tortoise). speed by moving lever forward or backward. (5) Operator Presence Control (OPC): (6) Clutch: Arrow points to the OPC bail. When bail is rotated rearward, Located on the plastic grip of the traction control lever. the engine may be started and will run as indicat
Résumé du contenu de la page N° 8
Features and Controls IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. G J I K H B A F D C E Features and Controls A. Oil Fill Cap and Dipstick F. Engine Primer B. Fuel Filler Cap G. Blade Control C. Recycling Cover H. Rope Start Handle D. Rear Height Adjustment Latch (2) I. Ground Speed Control E. Front Height Adjustment Latch (2) J. Drive Wheel Control K. Engine S
Résumé du contenu de la page N° 9
Operation Operation Pre-Start Check List Starting and Operation Make the following checks and perform the service required Engine and Blade before each start-up. 1. Move the engine speed control to the fast (‘Rabbit’) 1. Check the guards, deflectors, grass bag, adapter, and position. covers to make sure all are in place and securely 2. Push the primer button (A, Figure 3) three times to tightened. start a cold engine. 2. Check the blade control (A, Figure 1), wheel drive control (B), and ground
Résumé du contenu de la page N° 10
Operation (Continued) Starting and Operation (Continued) Handle Height Adjustment The height of the mower handle can be adjusted as follows: Propelling the Mower 1. Loosen the lower nuts (A, Figure 6) on each 1. Start the engine. Refer to the Section entitled “Starting lower handle. and Operation – Engine and Blade”. 2. Move the ground speed control (A, Figure 5) to the desired speed position. 3. Squeeze the wheel drive control (B) against the handle to engage the wheel drive and propel the mowe
Résumé du contenu de la page N° 11
Operation Operation (Continued) Recycling Operation WARNING ! ! Note: For best recycling results, cut up to a maximum of 1/3 DO NOT attempt any maintenance, adjustments or service of grass blade length and recycle ONLY when grass is dry. with engine and blade running. STOP engine and blade. 1. Set all wheels in the highest cutting position (Notch 7). Disconnect spark plug wire and secure away from spark Refer to the Section entitled “Cutting Height plug. Engine and components are HOT. Avoid seri
Résumé du contenu de la page N° 12
Operation (Continued) Installing the Grass Bag Adapter WARNING ! ! (Optional Accessory on Some Models) DO NOT attempt any maintenance, adjustments or service 1. Remove the recycling cover. Refer to the Section entitled with engine and blade running. STOP engine and blade. “Recycling Operation”. Disconnect spark plug wire and secure away from spark 2. Install the adapter (A, Figure 11) to the deck in place of plug. Engine and components are HOT. Avoid serious the recycling cover, making sure th
Résumé du contenu de la page N° 13
Operation Operation (Continued) Installing the Grass Bag WARNING ! ! (Door Type Bag) DO NOT attempt any maintenance, adjustments or service 1. Install the grass bag adapter. Refer to the Section with engine and blade running. STOP engine and blade. entitled “Installing the Grass Bag Adapter”. Disconnect spark plug wire and secure away from spark 2. Install the grass bag by opening the adapter door (A, plug. Engine and components are HOT. Avoid serious Figure 13) and sliding the connector (B) ove
Résumé du contenu de la page N° 14
Maintenance Check Grease Level in Transmission Maintenance - Introduction 1. Remove the transmission fill plug (A, Figure 15). Roll To retain the quality of the mower, use genuine SNAPPER the machine forward or backward while looking down replacement parts only. Contact a local SNAPPER dealer for into the plug hole. parts and service assistance. For the correct part or 2. If liquid grease is not visible on the input gear (the small information for a particular mower, always mention the gear bel
Résumé du contenu de la page N° 15
Maintenance Maintenance (Continued) Check Transmission Poly-V Belt WARNING ! ! 1. Visually check the poly-v belt for cracking, fraying, sev- DO NOT attempt any maintenance, adjustments or service ered or exposed belt strands. If worn or damaged, with engine and blade running. STOP engine and blade. replace the belt before operating the mower. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious Service - Periodic burns, allow sufficient time f
Résumé du contenu de la page N° 16
Maintenance (Continued) A WARNING ! ! B DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury. C Mower Blade Replacement Figure 19: Ninja blade wear limit
Résumé du contenu de la page N° 17
Maintenance Maintenance (Continued) A WARNING ! ! G B DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. D C Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious E F burns, allow sufficient time for all components to cool. Blade Sharpening (Continued) 4. Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 21). DO NOT sharpen the blade beyond the original cutt
Résumé du contenu de la page N° 18
Maintenance (Continued) Drive Spring Repair/Replacement WARNING ! ! If the drive spring (A, Figure 24) is loose, reconnect. If the DO NOT attempt any maintenance, adjustments or service spring is broken, replace with a new spring. with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark Note: Use a pair of needle nose pliers to install the drive plug. Engine and components are HOT. Avoid serious spring. burns, allow sufficient time for all compo
Résumé du contenu de la page N° 19
Maintenance Maintenance (Continued) A WARNING ! ! DO NOT attempt any maintenance, adjustments or service B with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Driven Disc Adjustment (Continued) 2. Remove the driven disc spring (A, Figure 26) from the driven disc assembly (B). Also remove the pin and washer (C) from the transfer rod (D
Résumé du contenu de la page N° 20
Maintenance (Continued) Driven Disc Bearing Replacement WARNING ! ! DO NOT attempt any maintenance, adjustments or service IMPORTANT: The bearing on these machines is staked into with engine and blade running. STOP engine and blade. the thrust plate. The bearing will have to be driven out with a Disconnect spark plug wire and secure away from spark mallet and a large punch. A new bearing with four retaining plug. Engine and components are HOT. Avoid serious screws will have to be purchased to re
