Résumé du contenu de la page N° 1
®
MODEL NUMBER 917.250551 OWNER'S MANUAL
o Assembly
o Operation
o Customer Responsibilities
o Service and Adjustments
o Repair Parts
CAUTION: Read and follow all safety rules and instructions before operating this equipment.
FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-800-659-5917
Résumé du contenu de la page N° 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE iS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH I. GENERAL OPERATION III. CHILDREN Read, understand, and fellow all instructions in the manual Tragic accidents can occur ifthe operator is not alert to the and on the machine before starting presence of children_ Children are often attracted to the Only al
Résumé du contenu de la page N° 3
CONGRATULATIONS on your purchase of a Sears PRODUCT SPECIFICATIONS Tractor It has been designed, engineered and manufac- HORSEPOWER: 22 5 tured to give you the best possible dependability and pefformance_ GASOLINE CAPACITY 35 GALLONS AND TYPE: UNLEADED REGULAR Should you experience any problem you cannot easily remedy, please contact your nearest Sears Authorized OIL TYPE (API-SF/SG): SAE 10W30 (above 32°F) Service CentedDepartmenL We have competent, well- SAE 5W-30 (below 32°F) trained technici
Résumé du contenu de la page N° 4
TABLE OF CONTENTS SAFETY RULES ............................................................ 2 MAINTENANCE SCHEDULE ..................................... 15 PRODUCT SPECIFICATIONS ...................................... 3 SERVICE AND ADJUSTMENTS ........................... 19-26 CUSTOMER RESPONSIBILITIES ..................... 3, 15-18 STORAGE ................................................................... 27 WARRANTY .................................................................. 3 TROUBLES
Résumé du contenu de la page N° 5
ACCE$SORmES ANDATTACH ENTS These accessories and attachments were available through most Sears retail outlets and service centers when the tractor was purchased Most Sears stores can order these items for you when you provide the model number of your tractor ENGINE MAINTENANCE SPARK PLUG GAS CAN ENGINE OtL FUEL STABILIZER AIR FILTER BLADES BELTS PERFORMANCE Sears offers a wide variety of attachments that fit your tractor Many of these are listed below with brief explanations of how they can help
Résumé du contenu de la page N° 6
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size Parts packed separately in carton (1) Shoulder Bolt 5/16-18 Seat (1) Knob (2) Gauge Wheel Bars Steering (1) Washer 17/32 x 1-3/16 x 12 Gauge Wheel t I I I Springs (double loop) I I I I I I Owner's Manual Parts Bag ]er Springs (single loop) Parts bag contents not shown full size (2) Washers 3/8 x 7/8 x 14 Gauge (2) Shoulder Bolts Q(2) Center- Wheels lock Nuts _(2) Front Link Assemblies "_ Steering Wheel Insert ® (2) Keys (2) Hex Bolts 1
Résumé du contenu de la page N° 7
ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely Use the correct tools as necessary to insure proper tightness TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (2) 7/16" wrenches Tire pressure gauge (1) 1/2" wrench Utility knife (1) 9/'16"
Résumé du contenu de la page N° 8
BLY CONNECT BATTERY (See Fig. 2) INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob_ CAUTION: Do not short battery termi- ° Remove cardboard packing on seat pan nals. Before connecting battery, re- move metal bracelets, wristwatch • Place seat on seat pan and assemble shoulder boll & bands, rings, etc. ° Assemble adjustment knob and flat washer loosely Do not tighten Positive terminal must be connected ° Tighten shoulder bolt securely first to prevent sparking from acciden-
Résumé du contenu de la page N° 9
ASSEMBLY INSTALL MOWER AND DRIVE BELT Connect anti-sway bar to chassis bracke[ under left footrest and retain with double loop retainer spring. (See Figs. 4 and 7) Turn height adjustment knob clockwise to remove Be sure tractor is on level surface and mower suspension slack from mower suspension, arms are raised with attachment lift control. Engage park- Raise deck to highest position ing brake Assemble gauge wheel bars to brackets using clevis o Cut and remove tie down securing anti-sway bar pi
Résumé du contenu de la page N° 10
ASSEMBLY ,/CHECKLIST BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THEBES TPERFORMANCE AND SA TISFACTION FROM THIS QUALITY PRODUCT, PLEASE REVIEW THE FOLLOWING CHECKLIST, ¢" All assembly instructions have been completed ¢" No remaining loose parts in carton ¢" Batteryis properly prepared and charged (Minimum 1 hour at 6 amps) ¢ Seat is adjusted comfortably and tightened securely. ,/ All tires are properly inflated, (For shipping purposes, the tires were overin
Résumé du contenu de la page N° 11
OPERATmON KNOWYOURTRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments Save this manual for future reference, AMMETER THRO_LECONTROL ATTACHMENT LIFT LEVER CLUTCH SWITCH CHOKE SWITCH LIFT LEVER CLUTCH/BRAKE PEDAL HEIGHT ADJUSTMENT KNOB RANGE SHIFT LEVER \ PARKING BRAKE LEVER GEARSHIFT LEVER FIG. 5 Our tractors conform to the safety standards of the
Résumé du contenu de la page N° 12
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which carl result nnsevere eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs, We recommend a wide vision safety mask over the spectacles or standard safety glasses. HOW TO USE YOUR TRACTOR NOTE: Under certain conditions when tractor is standing idle with the eng!ne running, hot engine exhaust gases may TO SET PARKING BRAKE (See Fig.
Résumé du contenu de la page N° 13
OPERATION TO ADJUST GAUGE WHEELS (See Fig. 7) TO OPERATE ON HILLS Adjust mower to desired cutting height • Lower mower with lift control Remove rear retainer hills with slopes greater than 15° and spring and clevis pin which secure each gauge wheel I _ CAUTION: Do not drive up or down do not drive across any slope. Lower gauge wheels to ground_ Raise gauge wheels slightly to align holes in bracket and gauge wheel bar Choose the slowest speed before starting up or down and insert clevis pins. Gau
Résumé du contenu de la page N° 14
OIPERAT ON ADD GASOLINE IVlOWING TiPS Fill fuel tank Use fresh, clean, regular unleaded Tire chains cannot be used when the mower housing is gasoline (Use of leaded gasoline will increase carbon attached to tractor. and lead oxide deposits and reduce valve life) o Mower should be properly leveled for best mowing IMPORTANT: WHEN OPERATING IN TEMPERATURES performance. See "TO LEVEL MOWER HOUSING" in BELOW 32°F(0°C), USE FRESH, CLEAN WINTER G RADE the Service and Adjustments section of this manual
Résumé du contenu de la page N° 15
CUSTOMER RESPONSUB_LnTmES FILL ,N DATE S _'_°_ _._"__Z_J__I _o_ A REGOLAR BY O UC OSERV,CE M PLETB ! .,_O_ _ _..X_ _,y,_ __" "_d_¢-_: _ _V'O EO A -_S Check Brake Operation 1_ {/ Check Tire Pressure 6/' 6/ T Check for Loose Fasteners _' _7 a Sharpen/Replace Mower Blades _4 A Lubrication Chart _ 6##' T Check Battery Level/Recharge 0 Clean Battery and Terminals _ 6#"' a Check Transaxle Cooling Adjust Blade Belt(s) Tension _5 Adjust Motion Drive Belt(s)Tension (_s Check Engine Oil Level 6#`# Change
Résumé du contenu de la page N° 16
CUSTOMER RESlPONSIB L TIES TRACTOR o The blade can be sharpened with a file or on a grinding wheel Do not attempt to sharpen while on the mower Always observe safety rules when performing any rrrainte- o To check blade balance, you will need a 5/8" diameter nance. steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with bal- BRAKE OPERATION ancer) If tractor requires more than six (6) feet stopping distance = Slide blade on to an unthreaded portion
Résumé du contenu de la page N° 17
CUSTOMER RESPONSIB L TmES , BATTERY TO CHANGE ENGINE OIL (See Fig& 14 and 15) Determine temperature range expected before oil change, Your tractor has a battery charging system which is suffi- All oil must meet API service classification SF or SG cient for normal use However. periodic charging of the battery with an automotive charger will extend its life. Be sure tractor is on level surface Keep battery and terminals clean Oil will drain more freely when warm, Keep battery bolts tight ° Catch o
Résumé du contenu de la page N° 18
CUSTOM RESPONSmBMLmTHES MUFFLER CLEAN AIR SCREEN (See Fig. 15) Inspect and replace corroded muffler and spark arrester (if Air screen must be kept free of dirt and chaff to prevent equipped) as it could create a fire hazard and/or damage, engine damage from overheating Clean with a wire brush or compressed air to remove dirt and stubborn dried gum SPARKPLUGS fibers. Replace spark plugs at the beginning of each mowing CLEAN AIR INTAKE/COOLING AREAS season or after every 100 hours of operation, wh
Résumé du contenu de la page N° 19
SERWCE AN ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: o Depress clutch/brake pedal fully and set parking brake. o Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. ° Turn ignition key "OFF" and remove key. • Make sure the blades and all moving parts have completely stopped. o Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TRACTOR TO LEVEL MOWER HOUSING Adjust the mower whil
Résumé du contenu de la page N° 20
SERVICE ADJUSTMENTS TO REPLACE MOWER DRIVE BELT FRONT-TO-BACK ADJUSTMENT (See Figs. 20 and 21) - IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE IF MOWER DRIVE BELT REMOVAL (See Fig 22) - THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS o Park tractor on a level surface. Engage parking brake. EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE • Remove four screws from L H mandrel cover and To obtain the best cutting results, the mower housing remove cover. should be
