Résumé du contenu de la page N° 1
OUTDOOR REFRIGERATOR AND
BEER DISPENSER
Use and Care and Installation Guide
MODELS:
RF24R
RF24T
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
A MESSAGE TO OUR CUSTOMERS Thank you for selecting this DCS Outdoor Refrigerator/Beer Dispenser. Because of these appliances’ unique features we have developed this Use and Care and Installation Guide. It contains valuable information on how to properly install, operate and maintain your new appliance for years of safe and enjoyable operation. To help serve you better, please fill out and submit your Product Registration by visiting our website at www.dcsappliances.com and selecting “Customer
Résumé du contenu de la page N° 4
TABLE OF CONTENTS SAFETY PRACTICES AND PRECAUTIONS 3 INSTALLATION - ESSENTIAL REQUIREMENTS 4 INSTALLATION Electrical connection 5 How to install your outdoor refrigerator/beer dispenser 6-7 How to install your outdoor beer dispenser components 8-11 Tapping procedures 12 USING THE REFRIGERATOR/BEER DISPENSER 13-16 CARE AND MAINTENANCE How to clean and maintain your unit 17 Replace interior light bulb 18 Things to remember 18 Energy saving tips 18 MOVING OR STORING YOUR REFRIGERATOR 19 TROUBLESHOO
Résumé du contenu de la page N° 5
SAFETY PRACTICES & PRECAUTIONS To reduce the risk of fire, electric shock, or injury to persons read these SAFETY PRACTICES AND PRECAUTIONS before operating this appliance. Use this appliance only for its intended purpose as described in this User Guide. WARNING When using this appliance always exercise basic safety precautions including the following: DANGER! n This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to
Résumé du contenu de la page N° 6
INSTALLATION – ESSENTIAL REQUIREMENTS POWER n The appliance must be installed so the power plug is accessible. n To ensure that the appliance is not accidentally switched off, connect your refrigerator/beer dispenser to its own power point. Do not plug in any other appliance at this power point or use extension cords, or double adapters, as the combined weight of both power cords can pull the double adapter from a wall outlet socket. n For power requirements, refer to the information on the se
Résumé du contenu de la page N° 7
INSTALLATION HOW TO INSTALL YOUR OUTDOOR REFRIGERATOR/BEER DISPENSER ELECTRICAL CONNECTION: Check serial plate for correct power supply. Use only electrical power supply as specified on your appliance serial nameplate. Do not use an extension cord! WARNING! Do not splash or spray water from a hose onto the refrigerator! Doing so may cause an electrical shock, which may result in severe injury or death. GROUNDING METHOD This product is factory equipped with a power supply cord that has a three-pr
Résumé du contenu de la page N° 8
INSTALLATION HOW TO INSTALL YOUR OUTDOOR REFRIGERATOR/BEER DISPENSER SELECT LOCATION: The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight, away from heat sources and moisture. Units with fan cooled condensers can be built in. Unit should be operated in a properly ventilated area with ambient temperatures above 40 degrees and below 100 degrees Fahrenheit. Installation should be such that the cabinet can be moved for
Résumé du contenu de la page N° 9
INSTALLATION HOW TO INSTALL YOUR OUTDOOR REFRIGERATOR/BEER DISPENSER ISLAND BEER DISPENSER INSTALLATION: When installing the Beer Dispenser under a counter and using a remote location for the Dispenser Tower, follow instructions below. Steps need to be taken to insure proper temperatures are maintained in the dispenser. IMPORTANT: All holes must be sealed to prevent air leak. Placement of the tower can be done by cutting a hole in the counter top directly above the existing hole of the Beer Di
Résumé du contenu de la page N° 10
INSTALLATION HOW TO INSTALL YOUR OUTDOOR BEER DISPENSER COMPONENTS Contents of Kit: Tools needed: Draft Tower Assembly Crescent Wrench Keg Coupler Pliers Air Line with Clamps Screwdriver Single Gauge Regulator 5 lb. CO Empty Cylinder 2 Q. WHAT SIZE KEG WILL FIT INTO MY REFRIGERATOR? Approximate measurements required to tap most kegs: Quarter Barrel Half Barrel Height 17-21 inches 25-29 inches Diameter 16-20 inches 18-22 inches Weight 80-85 pounds 160-180 pounds Check with your local beer wholesa
Résumé du contenu de la page N° 11
INSTALLATION HOW TO INSTALL YOUR OUTDOOR BEER DISPENSER COMPONENTS WARNING! CO can be dangerous. 2 1. ALWAYS connect CO gas cylinder to reducing valve or regualtor. 2 2. NEVER connect gas cylinder directly to keg. 3. ALWAYS secure gas cylinder in upright position. 4. ALWAYS keep gas cylinder away from heat. 5. NEVER drop or throw gas cylinder. 6. ALWAYS ventilate after CO leakage. 2 If it becomes difficult to breathe and your head starts to ache, abnormal concentrations of carbon dioxide may be
Résumé du contenu de la page N° 12
INSTALLATION HOW TO INSTALL YOUR OUTDOOR BEER DISPENSER COMPONENTS ASSEMBLE AND CONNECT PARTS 1 . Screw the black faucet knob onto the faucet (Fig. 06). 2. Mount the draft tower onto the counter top using the four furnished screws and the one mounting gasket (Fig. 07). 3. Attach the elbow to the top of the keg coupler, making sure to use a black washer (Fig. 08). Fig. 07 Fig. 06 4. Attach the beverage line coming from the draft tower to the elbow. Use the black washer inside the hex nut and ti
Résumé du contenu de la page N° 13
INSTALLATION HOW TO INSTALL YOUR OUTDOOR BEER DISPENSER COMPONENTS PARTS OF A CO REGULATOR 2 1. Pressure gauge (reads the amount of internal keg pressure). 1 2. Regulator adjustment screw (after keg is tapped, screw clockwise until pressure gauge indicates between 12 and 14 lbs.). 5 3. Adjustment lock nut (once the pressure gauge is between 12 and 14 2 lbs., tighten adjustment nut.) 4. Shut-off valve. 5. CO nut (use to connect to the tank). 2 3 HOW TO REPLACE AN EMPTY CO CYLINDER 2 1. Close shut
Résumé du contenu de la page N° 14
INSTALLATION TAPPING PROCEDURES LEVER TYPE KEG COUPLER (Taps most major domestic brands) 1. Align lug locks on tap head 2. Turn tap head handle 1/4 3. Pull tap handle out and with lug housing in top of turn clockwise; the tap push down to open beer keg; insert tap head. head is now secured to and CO ports in the keg. 2 the keg. The keg is now tapped. OPTIONAL WING TYPE KEG COUPLER (Taps most major domestic brands) 1. Align lug locks on tap head 2. Turn tap head handle 1/4 3. Rotate on/off valve
Résumé du contenu de la page N° 15
2 3 4 5 USING THE BEER DISPENSER TEMPERATURE CONTROL Initially set the cold control knob midway between the numbers. After at least 2 hours, adjust to the temperature that suits you. The higher the number you select, the cooler the temperature (Fig. 17). The temperature control knob is located at the bottom front of the cabinet, just behind the square opening near the middle of the venting grill. DEFROSTING INSTRUCTIONS (IF NEEDED) Never use a scraper or any tool that might scratch or pierce th
Résumé du contenu de la page N° 16
USING THE REFRIGERATOR CONTROL Door Switch Control Figure 3 NOTE During initial startup, or anytime power is interrupted, there steady amber color. “hi” indicates that the temperature is 10° F will be an approximate 5 minute delay before the refrigerator (5.5°C) above the set point and “Lo” indicates that the tempera- starts. During this period the controller will be assessing the ture is 10° F (5.5°C) below the set point. The alarm will remain temperature in the refrigerator and the disp
Résumé du contenu de la page N° 17
ADDITIONAL REFRIGERATOR CONTROL FEATURES Information Menu: Keypad Lockout Feature (Loc): This feature is useful for prohibiting changes in the The following features are available on the Information Menu. temperature set point or accidentally turning • Current Temperature the unit off. Press and hold the “SET” key to display the cur- • Maximum Stored Temperature • Minimum Stored Temperature r
Résumé du contenu de la page N° 18
USING THE REFRIGERATOR/BEER DISPENSER DRAW A GLASS OF BEER 1. Start with a clean beer 2. After the glass has 3. Let the remaining 4. Close the faucet glass that has been reached half full, beer run straight completely and wetted in cold water. gradually bring the down the middle. quickly. Place the glass at a glass to an upright This insures proper 45º angle, one inch position. release of CO by 2 below the faucet. Do producing a 3/4” to not let the glass touch 1” foam head. the faucet. Open th
Résumé du contenu de la page N° 19
CARE AND MAINTENANCE HOW TO CLEAN AND MAINTAIN YOUR UNIT Condenser The condenser coil under the cabinet for forced air unit does require frequent cleaning. Satisfactory cooling depends on adequate ventilation over the condenser coil. Be sure that nothing obstructs the air flow openings in the lower front of the cabinet. Cabinet The stainless steel cabinet can be washed with mild soap and water and thoroughly rinsed with clear water. Never use abrasive scouring powders. Interior It is important
Résumé du contenu de la page N° 20
CARE AND MAINTENANCE REPLACE INTERIOR LIGHT BULB When supplied with an interior light, your refrigerator uses a 15 Watt appliance light bulb. To replace the light bulb, proceed as follows: 1. Unplug the power cord from the power supply. 2. Open the cabinet door, the light bulb is located behind the display housing at the top of the unit. 3. Unscrew the existing bulb and replace with an equivalent 15 Watt, threaded, intermediate base appliance bulb. Do not replace with a bulb higher than 15 Watt
