Résumé du contenu de la page N° 1
Operator´smanual
WH4817EFQ/968999252
WH5219EFQ/968999253
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
OPERATOR’S MANUAL MOWER WH4817EFQ WH5219EFQ Stopping the Engine......................................... 33 Contents Adjustment of cutting height............................. 34 Contents.................................................................. 1 Wheel Motor Adjustment.................................. 34 Introduction ............................................................ 3 Moving Machine by Hand................................. 34 Congratulations...................................
Résumé du contenu de la page N° 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle componets contain or emit chemicals
Résumé du contenu de la page N° 5
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna Walk-Behind Mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a transmission regulated by steering controls contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value. If you s
Résumé du contenu de la page N° 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this Operator’s Manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the follo
Résumé du contenu de la page N° 7
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to n
Résumé du contenu de la page N° 8
SYMBOLS AND DECALS Keep a safe Severing of distance from fingers & toes. the machine. Moving sharp blades Read Rotating under cover Operator´s blades Manual. Whole body Shut off engine exposure to & remove key thrown before objects. performing any maintenance or repair work. English-6
Résumé du contenu de la page N° 9
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. Learn how to use the machine and its controls safely and learn how to stop quickly. Also learn to recognize the safety decals. O
Résumé du contenu de la page N° 10
SAFETY INSTRUCTIONS Shut down the blades when not mowing. WARNING! Be careful when turning around fixed Engine exhaust and certain objects, so that the blades do not hit vehicle components contain them. Never drive over foreign objects. or emit chemicals considered Only use the machine in daylight or in to cause cancer, birth defects, other well-lit conditions. Keep the or other reproductive system machine a safe distance from holes or damage. The engine exhaust other irregularities. Pay a
Résumé du contenu de la page N° 11
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if you feel unsure, do not mow the slope. Do as follows Remove obstacles such as stones, tree branches, etc. Watch out for and avoid driving over furrows, holes, and bumps. On uneven terrain, the machine can t
Résumé du contenu de la page N° 12
SAFETY INSTRUCTIONS Children Serious accidents may occur if you fail to be on guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing work. Never assume that children will stay where you last saw them. Keepchildrenawayfromthe mowing area and under close supervision by another adult. Keep an eye out and shut off the machine if children enter the work area. 8011-636 Before and during a reversing maneuver, Never allow children to operate the
Résumé du contenu de la page N° 13
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the protective plate for the mower deck’s drive belt is removed. Stop the engine. Prevent the engine from starting by removing the spark plug cables from the spark plugs or by removing the ignition key before making any adjustments or performing maintenance. Never fill the fuel tank indoors. Fuel and fuel fumes are poisonous and extremely flammable. Be especially cautious when handling fuel, as carelessness can re
Résumé du contenu de la page N° 14
SAFETY INSTRUCTIONS Acid in the eyes can cause blindness, contact a doctor immediately. Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/ damage. Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened and that the equipment is in good condition. 6003-009 Do not smoke when perfor
Résumé du contenu de la page N° 15
SAFETY INSTRUCTIONS Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. Never make adjustments with the engine running. Use protective glasses at The machine is tested and approved only maintenance work. with the equipment originally provided or recommended by the manufacturer. The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. When mowing familiar areas use the mulch
Résumé du contenu de la page N° 16
SAFETY INSTRUCTIONS Transport The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer. Use an approved trailer to transport the machine. Activate the parking brake, turn IMPORTANT INFORMATION off the fuel supply, and fasten the The parking brake is not sufficient to lock machine with approved fastening the machine in place during transport. devices, such as bands, chains, or Ensure that the machine is well fas
Résumé du contenu de la page N° 17
CONTROLS Controls This operator’s manual describes the Husqvarna Walk-Behind Mowers WH4817EFQ and WH5219EFQ. The machines are fitted with a Kawasaki four- stroke V-Twin engine, for data See “Technical Data” on page 61. Transmission from the engine is made via two belt-driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. 8011-414 Walk behind mower 8011-779
Résumé du contenu de la page N° 18
CONTROLS 1. Ground Speed Lever Located in the center of the console. Controls the forward speed of the mower. Push the lever forward if you want to go faster, pull it back to go slower or pull it all the way back to the stop postion. To begin motion, the operator must move the ground speed lever forward before disengaging the neutral lock bail. Ground Speed Lever Stop is the adjustment screw placed on the front edge of the console panel. It is used to insure ground speed lever 8011-415
Résumé du contenu de la page N° 19
CONTROLS 4. Operator Presence Lever Located on the handle. As an additional safety feature, these mowers are equipped with an Operators Presence System. This is an electrical interlock safety system which is activated by depressing either one or both of the Operator Presence Levers at the handle grips. Releasing both Operators Presence Levers while mowing or transporting will break the electrical circuit and cause the engine and mower to stop. The mower will not stop 8011-661 immediat
Résumé du contenu de la page N° 20
CONTROLS 6. Blade Engagement Switch In order to engage the blades, pull the knob out. The blades are disengaged when the knob is depressed. The switch energizes the clutch for the V-belt pulley, placed on the crankshaft, to drive the blades. 8011-655 Engaging the mower deck 7. Neutral Bail Keeps the unit from moving while idling. The neutral bail will lock the motion control levers in neutral position and must be activated when starting the engine. To engage the neutral bail, pull the Gro
