Résumé du contenu de la page N° 1
Operator'smanual
WG4815P/968999278
WG3613P/968999116
WG3213P/968999114
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
OPERATOR’S MANUAL MOWER WG3213P WG3613P WG4815P Maintenance ........................................................ 35 Contents Maintenance Schedule..................................... 35 Contents.................................................................. 1 Ignition System................................................. 37 Introduction ............................................................ 3 Checking the Safety System ............................ 38 Congratulations...............
Résumé du contenu de la page N° 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle componets contain or emit chemicals
Résumé du contenu de la page N° 5
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna Walk-Behind Mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a transmission regulated by motion controls contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value. If you sel
Résumé du contenu de la page N° 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this Operator’s Manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the follo
Résumé du contenu de la page N° 7
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to n
Résumé du contenu de la page N° 8
SYMBOLS AND DECALS Keep a safe Severing of distance from fingers & toes. the machine. Moving sharp blades Read Rotating under cover. Operator´s blades. Manual. Whole body Shut off engine exposure to & remove key thrown before objects. performing any maintenance or repair work. English-6
Résumé du contenu de la page N° 9
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. Learn how to use the machine and its controls safely and learn how to stop quickly. Also learn to recognize the safety decals. O
Résumé du contenu de la page N° 10
SAFETY INSTRUCTIONS Shut off the blades when not mowing. WARNING! Be careful when turning around fixed Engine exhaust and certain objects, so that the blades do not hit vehicle components contain them. Never drive over foreign objects. or emit chemicals considered Only use the machine in daylight or in to cause cancer, birth defects, other well-lit conditions. Keep the or other reproductive system machine a safe distance from holes or damage. The engine exhaust other irregularities. Pay at
Résumé du contenu de la page N° 11
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if you feel unsure, do not mow the slope. Do as follows Remove obstacles such as stones, tree branches, etc. Watch out for and avoid driving over furrows, holes, and bumps. On uneven terrain, the machine can t
Résumé du contenu de la page N° 12
SAFETY INSTRUCTIONS Children Serious accidents may occur if you fail to be on guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing work. Never assume that children will stay where you last saw them. Keepchildrenawayfromthe mowing area and under close supervision by another adult. Keep an eye out and shut off the machine if children enter the work area. 8011-636 Before and during a reversing maneuver, Never allow children to operate the
Résumé du contenu de la page N° 13
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the protective plate for the mower deck’s drive belt is removed. Stop the engine. Prevent the engine from starting by removing the spark plug cables from the spark plugs or by removing the ignition key before making any adjustments or performing maintenance. Never fill the fuel tank indoors. Fuel and fuel fumes are poisonous and extremely flammable. Be especially cautious when handling fuel, as carelessness can re
Résumé du contenu de la page N° 14
SAFETY INSTRUCTIONS Do not modify safety equipment. Check regularly to be sure it works properly. Use protective glasses at The machine must not be driven with maintenance work. defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices. Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components. Never use the machine indoors or
Résumé du contenu de la page N° 15
SAFETY INSTRUCTIONS Transport The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer. Use an approved trailer to transport the machine. Activate the parking brake, turn IMPORTANT INFORMATION off the fuel supply, and fasten the The parking brake is not sufficient to lock machine with approved fastening the machine in place during transport. devices, such as bands, chains, or Ensure that the machine is well fas
Résumé du contenu de la page N° 16
CONTROLS Controls This operator’s manual describes the Husqvarna Walk-Behind Mowers WG3213P, WG3613P and WG4815P. The machines are fitted with a Kawasaki or Kohler four-stroke V- Twin engine, for data see “Technical data” on page 60. Transmission from the engine is made via two V-belts, one for each wheel. Using the left and right motion controls, the speed of the rear wheels is regulated. 8011-708 Walk behind mower 8011-680 Locations of the controls Control Locations Page Page 1. Recoil starter
Résumé du contenu de la page N° 17
CONTROLS 1. Recoil Starter Grip IMPORTANT INFORMATION Do not let recoil cord snap back by itself. This may damage the cord or the recoil starter assembly. Pull the recoil starter grip slowly until you feel compresion, then pull it briskly. Normally this engine will not backfire. If you 8011-498 get backfires, contact your Husqvarna dealer Recoil starter grip for service. 2. Ignition Switch The ignition keyswitchisplacedonthe control panel. 8011-693 Ignition key English-15
Résumé du contenu de la page N° 18
CONTROLS 3. Motion control levers The machine’s speed and direction are continuously variable using the two motion control levers. When both controls are in the neutral position, the machine stands still. The controls can be locked in neutral position by the thumb latches. By releasing both controls an equal amount, the machine moves in a straight line forward. 8011-660 Motion control lever WARNING! The machine can turn very rapidly if one motion control lever is moved much further than the othe
Résumé du contenu de la page N° 19
CONTROLS 5. Choke and Throttle Control Choke Control The choke control is combined with the throttle control. To engage the choke, the throttle control is moved past the max rpm setting to its choke position. Do not use the choke when starting a warm engine. Throttle Control The throttle control regulates the engine speed and thereby the rate of rotation of the 8011-709 blades, assuming the control for engaging the Choke and throttle control mower deck is pulled forward, see Engaging the Mower D
Résumé du contenu de la page N° 20
CONTROLS 7. Thumb Latch The thumb latches are used to lock the motion control levers in their neutral position e.g. when starting the engine. Lock the motion control levers by pulling the thumb latches backward. Unlock the motion control levers by pushing the thumb latches forward. Parking Brake 8011-659 Parkingbrake is appliedwhen boththumb Thumb latch, locked position latches have locked the motion control levers in neutral position. 8. Blade Engagement Lever The blade engagement lever is on t
