Résumé du contenu de la page N° 1
07002
LGT2554
Owner's Manual
532 44 00-55
Résumé du contenu de la page N° 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Never leave a running machine unattended. Always WARNING: In order to prevent ac ci den tal turn off blades, set parking brake, stop engine, and starting when setting up, trans port ing, remove keys before dismounting. ad just ing or making repai
Résumé du contenu de la page N° 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN Tragic accidents can occur if the operator is not alert to • Keep all nuts and bolts tight to be sure the equipment the presence of children. Children are often attracted to is in safe working condition. the ma chine and the mowing activity. Never assume that • Never tamper with safety devices. Check their proper children will remain where you last saw them. operation regularly. • Keep children out of the mowing area and
Résumé du contenu de la page N° 4
PRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. Gasoline Capacity 4 Gallons and type: Unleaded Regular • Follow a regular schedule in maintaining, caring for and using your tractor. Oil Type (API-SG-SL): SAE 30 (above 32°F) SAE 5W-30 (below 32°F) • Follow the instructions under “Maintenance” and “Stor- age” sec tions of this own er’s manual. Oil Capacity: W/ Filter: 64 oz Spark Plug: Champion RC12YC WARNING: This tractor is equipped with an in
Résumé du contenu de la page N° 5
UNASSEMBLED PARTS Mower Mower Front Wheel (2) Rear Lift Link (5) 1-3/16 (1) Shoulder Bolt Assemblies (1) 1-1/4 O.D. O.D. Washers Washer (1) Small Retainer Springs (1) Front Lift Link (1) 3/8-16 Assembly (1) Wheel Locknut (5) Large Retainer Springs Slope Sheet (1) Oil Drain Tube If Equipped Keys (1) 3/4 O.D. (1) Anti-Sway Bar Washers (2) Keys (1) Small Retainer Springs ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled fo
Résumé du contenu de la page N° 6
ASSEMBLY ADJUST SEAT (See Fig. 2) TO INSTALL MOWER AND DRIVE BELT • Sit in seat. (See Figs. 3 - 14) • Lift up adjustment lever (A) and slide seat until a com- 1. SET PARKING BRAKE LEVER AND LOWER AT- fortable position is reached which allows you to press TACHMENT LIFT (See Fig. X1) clutch/brake pedal all the way down. • Depress clutch/brake pedal all the way down and hold. • Release lever to lock seat in position. • Pull parking brake lever up and hold, re lease pres sure from clutch/brake pe
Résumé du contenu de la page N° 7
ASSEMBLY 4. SLIDE MOWER UNDER TRACTOR (See Fig. 7) CAUTION: Continuing to press the electric lift switch • Bring belt forward and check belt for proper routing in after the mower deck has reached the minimum all mower pulley grooves. or maximum position may result in damage to the electric lift mechanism.The electric lift mechanism NOTE: Be sure mower side suspension arms (A) are point- is equipped with a thermal protection system. If ing forward before sliding mower under tractor. the sys
Résumé du contenu de la page N° 8
ASSEMBLY 7. ATTACH REAR LIFT LINKS (C) (See Fig. 12) ANTI-SWAY BAR • Insert rod end of rear lift link (C) into hole (U) in tractor TRANSAXLE (S) LOCATION BRACKET (T) lift shaft suspension arm and pivot link down to mower. LOCATED • Lift rear corner of mower and position slot in link as- BETWEEN REAR TIRES sembly over pin on rear mower bracket (D) and secure with large washer and large retainer spring. • Repeat on opposite side of tractor. U C S C. REAR LIFT LINK(S) D. RIGHT SIDE REAR MOWE
Résumé du contenu de la page N° 9
ASSEMBLY 9 INSTALL BELT ON ENGINE CLUTCH PULLEY (M) ✓CHECKLIST (See Fig. 6 & 14) • Disengage belt tension rod (K) from locking bracket (L). BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST • Install belt onto engine clutch pulley (M). PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT. M PLEASE REVIEW THE FOLLOWING CHECKLIST: ✓ All assembly instructions have been com plet ed. ✓ No remaining loose parts in carton. ✓ Battery is properly prepared and charge
Résumé du contenu de la page N° 10
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. FAST SLOW REVERSE NEUTRAL HIGH LOW CHOKE IGNITION SWITCH ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LIFT ENGINE OFF REVERSE OPERATION SYSTEM (ROS) CLUTCH/BRAKE LIGHTS ON BATTERY CRUISE CONTROL FUEL REVERSE FORWARD PEDAL 15 15 ATTACHMENT DANGER, KEEP HANDS ATTACHMENT SLOPE HAZARDS KEEP AREA CLEAR CLUTCH DISENGAGED CLUTCH ENGAGED AND FEET AWAY (SEE SAF
Résumé du contenu de la page N° 11
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. D H P G E N F B Q A C J M Fig. 15 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to raise and lower (G) REVERSE OPERATION SYSTEM (ROS) "ON" the
Résumé du contenu de la page N° 12
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles. NOTE: Failure to move throttle control between half and full HOW TO USE YOUR TRAC TOR speed (fast) position, before stopping, may cause engine to “backfi
Résumé du contenu de la page N° 13
OPERATION TO MOVE FORWARD AND BACKWARD TO ADJUST GAUGE WHEELS (See Fig. 21) (See Fig. 19) Gauge wheels are prop er ly ad just ed when they are slight ly off the ground when mower is at the desired cutting height in The direction and speed of movement is controlled by the operating position. Gauge wheels then keep the deck in prop- motion control lever. (J) er position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a flat level J surface. • Ad
Résumé du contenu de la page N° 14
OPERATION REVERSE OPERATION SYSTEM (ROS) TO TRANSPORT (See Fig. 15 and 24) Your tractor is equipped with a Reverse Operation System When pushing or towing your tractor, be sure to disengage (ROS). Any attempt by the operator to travel in the reverse transmission by placing freewheel control in free wheel ing direction with the attachment clutch engaged will shut off po si tion. Free wheel control is located at the rear drawbar the engine unless ignition key is placed in the ROS "ON" of
Résumé du contenu de la page N° 15
OPERATION TO START ENGINE (See Fig. 16) BEFORE STARTING THE ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move CHECK ENGINE OIL LEVEL fuel from the tank to the engine. The engine in your tractor has been shipped, from the • Be sure freewheel control is in the transmission en gaged factory, already filled with sum mer weight oil. position. • Check engine oil with tractor on level ground. • Sit on seat in oper
Résumé du contenu de la page N° 16
OPERATION PURGE TRANSMISSION MOWING TIPS • Tire chains cannot be used when the mower hous ing CAUTION: Never engage or disengage is attached to tractor. freewheel lever while the engine is run ning. • Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual. To ensure proper operation and performance, it is rec om- mend ed that the transmission be purged before operating • The left hand side of mower s
Résumé du contenu de la page N° 17
MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH 8 25 50 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems R Check for Loose Fasteners A Check/Replace Mower Blades 3 C T Lubrication Chart 0 Check Battery Level 4 R Clean Battery and Terminals Clean Debris Off Steering Plate 5 Check Transaxle Cooling Check Mower Levelness Check V-Belts Check Engine Oil Level 1,2 Change Engine Oil (with
Résumé du contenu de la page N° 18
MAINTENANCE BLADE CARE TRACTOR For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. CAUTION: Use only a replacement blade ap- BRAKE OPERATION proved by the manufacturer of your tractor. If tractor requires more than five (5) feet to stop at highest Using a blade not approved by the manu- speed in high est gear on a level, dry concrete or paved facturer of your tractor is hazardous, could surface
Résumé du contenu de la page N° 19
MAINTENANCE TRANSAXLE MAINTENANCE OIL DRAIN VALVE The transmission fan and cooling fins should be kept clean to assure proper cooling. Do not attempt to clean fan or transmission while engine CLOSED AND is running or while the transmission is hot. To prevent pos- LOCKED si ble damage to seals, do not use high pressure water or POSITION steam to clean transmission. DRAIN TUBE • Inspect cooling fan to be sure fan blades are intact and clean. • Inspect cooling fins for dirt, grass clippings
Résumé du contenu de la page N° 20
00667 MAINTENANCE DECK WASHOUT PORT (See Fig. 31) IN-LINE FUEL FILTER (See Fig. 29) Your tractor’s deck is equipped with a washout port on The fuel filter should be replaced once each season. If fuel its surface as part of its deck wash system. It should be filter becomes clogged, ob struct ing fuel flow to car bu re tor, utilized after each use. re place ment is re quired. 1. Drive the tractor to a level, clear spot on your lawn, near • With engine cool, remove filter and plug fuel line
