Résumé du contenu de la page N° 1
Harrier 48/56 Pro
CODES
496G & 566G
OWNER’S HANDBOOK
Original Version (EN)
ISSUE: 20.12.10 PART NUMBER: 111-3523 (B)
Résumé du contenu de la page N° 2
CONTENTS Contents 2 - Grassbag 9 - Without Grass Collection 9 Introduction 3 - Heavy Growth 9 - Friction Disc 9 Specifications / Main Features 4 - Non-Grassed Areas 9 - Maintenance Schedule 10 Safety Precautions 5 - 6 - Safety Alert Symbol 5 Mower Maintenance 11 - 13 - Training 5 - Carburettor Adjustments 11 - Preparation 5 - Oil Service 11 - Safety Symbols 5 - Air Cleaner Service 11 - Operation 5 - 6 - Spark Plug Service 11 - Maintenance & Storage 6 - Keeping Engine Clean 11 - Control Symbol
Résumé du contenu de la page N° 3
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you Use of non standard parts or any arbitrary modifications carried out on this machine may gain safe and efficient service from your machine. relieve Hayter Limited of liability for any resulting damage or injury. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it Hayter mowers are robustly constructed and designed for efficient economical perform- gives essential inform
Résumé du contenu de la page N° 4
SPECIFICATIONS / MAIN FEATURES Code 496 566 Engine Briggs & Stratton Briggs & Stratton Engine type Series 850 Series 850 Engine / Cutterbar Speed 2750 rpm 2750 rpm Fuel type Unleaded petrol Unleaded petrol Fuel capacity 1.1 litres 1.1 litres Oil type SAE 30 engine oil SAE 30 engine oil Oil sump capacity 0.6 litres 0.6 litres Cutting width 480mm 560mm Cutting height 13 - 60mm 13 - 60mm Overall dimensions 1080 x 507 x 1485mm 1080 x 585 x 1565mm Weight 48.5 Kg 51 Kg 10 11 9 1. Spark
Résumé du contenu de la page N° 5
SAFETY PRECAUTIONS Safety Alert Symbol Preparation Operation This safety alert symbol indicates important safety While mowing, always wear substantial footwear and long Do not operate the engine in a confined space where messages. When you see this symbol be alert to the trousers. Do not operate the equipment when barefoot or exhaust fumes (carbon monoxide) can collect. possibility of injury. Carefully read the following and wearing sandals. Always pull the starter cord slowly until resistanc
Résumé du contenu de la page N° 6
SAFETY PRECAUTIONS Never touch the exhaust/exhaust guard or cooling fins Never store the mower with petrol in the tank within an Operation cont when the engine is hot. enclosed area where fumes may reach an open flame or If the machine has to be tilted for transportation when spark. crossing surfaces other than grass, and when transporting Stop the engine and disconnect the spark plug lead: the machine to and from the area to be mowed. Stop the - Before clearing blockages or unclogging the
Résumé du contenu de la page N° 7
ASSEMBLING THE MOWER BEFORE FIRST USE Raise the rear deflector, lower the grassbag and hook in in quantities that can be used within 30 days. Never mix Delivery Checklist oil with petrol. For added engine protection Briggs & position. Lower the deflector to rest on the grassbag. Remove the mower from the packaging and check that Stratton recommend the use of their fuel additive which the following items have been supplied correctly. If any is available from an authorised Briggs & Stratton s
Résumé du contenu de la page N° 8
OPERATING THE MOWER lever, apply downward pressure on the handlebar to raise Controls Forward Travel the front wheels just above ground level and steer in the Operate all control levers several times and ensure that Hold the handlebar and operate the ground drive clutch required direction. the cables move freely. Check that the engine stop and lever to power the mower in a forward direction. (Refer ground drive clutch levers return freely to their rest fig.10) To prevent accidents do not rai
Résumé du contenu de la page N° 9
OPERATING THE MOWER shake the grassbag vigorously to clean the airways. Good Height Of Cut Non Grassed Areas grass collection depends on good air flow through the To adjust the height of cut: Grip the lever and pull side- When moving the mower across non-grassed areas, stop grassbag. When collecting grass clippings it is important ways to disengage it from the locking notch, then push the engine and set the mower to the maximum height of that the grassbag is emptied regularly to prevent blo
Résumé du contenu de la page N° 10
MAINTENANCE SCHEDULE - Sharpen the cutterblade. Maintenance Schedule Follow the hourly or calendar intervals, whichever occurs 50 Hours Or Every Season first. More frequent service will be required if working for Change the engine oil. prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation 100 Hours Or Every Season cutting tall, dry grass. - Clean the engine cooling system. Clean more often under dusty conditions or when airborne deb
Résumé du contenu de la page N° 11
MOWER MAINTENANCE Water can contaminate the fuel. Always clean with a Carburettor Adjustments Air Cleaner Service brush or compressed air. (Refer fig.26) Should only be made by an authorised Briggs & Stratton To service the air cleaner, loosen the knob (1) and re- dealer. Under no circumstances should the engine be move cover (2). Carefully remove the foam filter (3) and Grass and debris may clog the engine’s air cooling adjusted to run at a speed in excess of that shown on the cartridge (4
Résumé du contenu de la page N° 12
MOWER MAINTENANCE arrangement should be checked regularly for signs of Securing Nuts & Bolts Lubrication wear or damage. Ensure that the cutterblade is not bent Regularly check that all securing nuts and bolts are tight. Lubricate the wheels, pivot points and linkages with or cracked. Replace missing or damaged items immediately. engine oil every 25 operating hours. Apply a good quality medium grease to the inner control A damaged cutterblade that is out of balance will vibrate cables at th
Résumé du contenu de la page N° 13
MOWER MAINTENANCE with Briggs & Stratton fuel additive or drained of fuel to Cutterblade Sharpening prevent gum from forming in the fuel system or on essen- A slightly worn cutterblade may be re-sharpened. Both tial carburettor parts. To ensure your mower is maintained blade edges must be sharpened equally to ensure balance. in good working order it is important that the following Sharpen the cutterblade every 25 mowing hours or more procedure is adopted. Refer to the Maintenance section
Résumé du contenu de la page N° 14
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. Keep off the grass if frozen or necessary to mow the lawn twice a week. Raking before assist in drainage. Brush in peat and sharp sand. waterlogged. mowing is important this month as the combined action keeps runners of clover under control. Wat
Résumé du contenu de la page N° 15
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION 1. Engine stop lever released 1. Operate engine/blade stop Discharge chute blocks 1. Grass is wet 1. Mow dry grass lever 2. Cut height is too low 2. Increase cut height Engine will not turn 2. Incorrect oil level 2. Check oil level 3. Grassbag full 3. Empty grassbag over 3. Obstruction under deck 3. Remove obstruction 4. Airflow through the grassbag 4. Clean the grassbag is restricted 1. Excess oil 1. Check
Résumé du contenu de la page N° 16
WARRANTY NOTES LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of one year from the date of purchase. The manufacturers of the engine furnish their own warranty and services are provided through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full benefit of the warranty, the Warranty Registration Card must be returned to
Résumé du contenu de la page N° 17
NOTES NOTES 16 17
Résumé du contenu de la page N° 18
CUSTOMER INFORMATION SERVICE RECORD CODE SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:- Engine:- Date of Sale:- Your Local Dealer:- Note for dealer : Please retain this voucher for your records. 2nd Y ear (24 months ) 2nd Y ear (24 months ) Owner ’s Name : We certify that this serv
