Instruction d'utilisation Exmark Ultra VAC LAZER AS

Instruction d'utilisation pour le dispositif Exmark Ultra VAC LAZER AS

Dispositif: Exmark Ultra VAC LAZER AS
Catégorie: Tondeuse
Fabricant: Exmark
Dimension: 2.36 MB
Date d'addition: 7/11/2013
Nombre des pages: 28
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif Exmark Ultra VAC LAZER AS. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec Exmark Ultra VAC LAZER AS.

Pour votre confort

Si regarder l'instruction Exmark Ultra VAC LAZER AS directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction Exmark Ultra VAC LAZER AS en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction Exmark Ultra VAC LAZER AS sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
Exmark Ultra VAC LAZER AS Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction Exmark Ultra VAC LAZER AS - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de Exmark Ultra VAC LAZER AS. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

UL TRA V AC ®
LAZER Z ® AND
LAZER Z ® AS MODELS
For Ultra V ac Serial Nos.
790,000 & Higher
(T o fit Lazer Z (LZZ) and
Lazer Z AS (LZAS) Units
Serial Nos. 790,000 & Higher)
Par t No. 4500-511 Rev . A

Résumé du contenu de la page N° 2

Exmar k r eser v es the right to mak e changes or add impr o v ements to its pr oducts at an y time without incur ring an y obligation to mak e such changes to pr oducts man uf actur ed pr eviousl y . Exmar k, or its distributor s and dealer s, accept no r esponsibility f or v ariations which may be evident in the actual specifications of its pr oducts and the statements and descriptions contained in this publication. © 2009—Exmark Mfg. Co., Inc. Contact us at www .Exmark.com. Industrial Park Bo

Résumé du contenu de la page N° 3

Introduction CONGRATULATIONS on the purc hase of y our Exmark Ultra V ac . T his product has been carefully designed and man ufactured to gi v e y ou a maxim um amount of de pendability and years of trouble-free operation. T his man ual contains operating, maintenance , adjustment, and safety instr uctions for y our Exmark Figure 1 Ultra V ac 1. Model and serial number location BEFORE OPERATING Y OUR MO WER, CAREFULL Y READ THIS MANU AL IN ITS ENTIRETY . Model No. By follo wing the operating, ma

Résumé du contenu de la page N° 4

Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Aler t Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safe Operating Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety and

Résumé du contenu de la page N° 5

Safety • Nev er let c hildren or untrained people operate Safety or ser vice the equipment. Local regulations ma y restrict the ag e of the operator . Safety Alert Symbol • T he o wner/user can prev ent and is responsible T his Safety Aler t Symbol ( Figure 2 ) is used both in for accidents or injuries occur ring to himself or this man ual and on the mac hine to identify impor tant herself , other people or proper ty . safety messag es whic h m ust be follo w ed to a v oid accidents Preparation

Résumé du contenu de la page N° 6

Safety Slope Operation DANGER Use Extr eme caution when mo wing and/or tur ning T her e ar e r otating blades in the blo w er and on slopes as loss of traction and/or tip-o v er could under the mo w er deck. Blade contact can occur . T he operator is responsible for safe operation cause serious operator or bystander injur y on slopes . or ev en death. • Do Not r each into blo w er unless r otation DANGER indicator has stopped. Disenga ge PT O , stop engine, r emo v e k ey , w ait f or all Operat

Résumé du contenu de la page N° 7

Safety prog ressi v ely g reater care on slopes as the hopper fills . Maintenance and Storage • Diseng ag e PTO , set parking brak e , stop engine and remo v e k ey or disconnect spark plug wire . W ait for all mo v ement to stop before adjusting, cleaning or re pairing . • Use care when c hec king blades . W rap the blade(s) or w ear glo v es , and use caution when ser vicing them. Only re place damag ed blades . Nev er straighten or w eld them. • K ee p all guards , shields and all safety devi

Résumé du contenu de la page N° 8

Safety Safety and Instructional Decals • K ee p all safety signs legible . R emo v e all g rease , • New safety signs ma y be obtained from dir t and debris from safety signs and instr uctional y our authorized Exmark equipment dealer or labels . distributor or from Exmark Mfg . Co . Inc . • R e place all w or n, damag ed, or missing safety • Safety signs ma y be affix ed b y peeling off the signs . bac king to expose the adhesi v e surface . Apply only to a clean, dr y surface . Smooth to remo

Résumé du contenu de la page N° 9

Safety 103-3508 LZUV2B Units Only 109-5890 LZUV3B Units Only 9

Résumé du contenu de la page N° 10

Specifications Specifications Model Numbers Serial Nos: 790,000 and Higher LZUV2B–Fits Lazer Z (LZZ) and Lazer Z AS (LZAS) with 48 or 52 inc h dec k. LZUV3B–Fits Lazer Z (LZZ) and Lazer Z AS (LZAS) with 60 or 72 inc h dec k. Systems Overall Length: LZUV2B Bagging System w/Ultra V ac • Collection bins: Lazer Z w/48 inc h Dec k 102.25 inc hes (259.7 cm) – Commercial g rade , cloth mesh bags with 102.25 inc hes (259.7 cm) Lazer Z w/52 inc h Dec k reinforced bottoms . – LZUV2B Capacity: 8.0 bushels

Résumé du contenu de la page N° 11

Operation Product Overview Operation Note: Deter mine the left and right sides of the mac hine from the nor mal operating position. Important: F or Serial Number s 790,000 and higher , multiple accessories added to a base unit can change the sta bility of the machine. R ead the unit operator’ s man ual to deter mine if counterbalance w eights ar e necessar y f or the accessories installed on the unit. Important: Due to the added w eight of the Ultra V ac , it is impor tant to ensur e the par kin

Résumé du contenu de la page N° 12

Operation stopped before clearing blo w er assembly or mo w er dec k. 3. T o remo v e the bags , first diseng ag e the PTO , stop the engine and w ait for all mo ving par ts to stop . Open the hopper and remo v e the bags b y lifting up on the rear of the bag, then unhooking the front clip . Empty the bags b y in v er ting them. 4. R einstall bags , close and latc h hopper before contin uing mo wing . Tips for mo wing conditions: • W hen mo wing in areas with sandy soil, use lo w lift blades on

Résumé du contenu de la page N° 13

Operation CAUTION W ARNING T he deck shea v e will become v er y hot. An unco v er ed discharge opening will T ouching a hot deck shea v e can cause sev er e allo w objects to be thr o wn in operator’ s or bur ns. bystander’ s dir ection. Also, contact with blade could occur . T hr o wn objects or blade Allo w the deck shea v e to cool completel y contact can cause serious injur y or kill y ou bef or e r emo ving the belt. or bystander s. Nev er operate mo w er unless discharge 5. Pull the idler

Résumé du contenu de la page N° 14

Operation the toe board, remo v e the tw o hair pins that retain 2. R emo v e hair pin and c hute pi v ot pin. R emo v e it and then lift it from the mount brac k et. T he disc harg e deflector . Pi v ot pin and hair pin ma y be brac k et bolted to the toe board remains on the stored in the pi v ot holes of the disc harg e deflector unit. during bag ging operation. F or the LZUV3B Units: R emo v e the caster 3. La y the hopper assembly do wn as sho wn in w eights b y loosening the clamping knobs

Résumé du contenu de la page N° 15

Operation 8. Adjust the exhaust di v er ter up or do wn in the side or temporarily remo v ed. Either loosen slots so it fits o v er the m uffler . or remo v e both n uts on the top and bottom of the belt guide . Once the belt is installed 9. If needed, install w ashers betw een the exhaust on the impeller shea v e , reinstall the belt guide di v er ter and the frame to space the guard outw ard. and tighten all hardw are . 10. Install the mount pin into the frame mount bar rel. Mak e sure that it

Résumé du contenu de la page N° 16

Operation Figure 14 Figure 16 Large Decks — V iew from T op of Blower 1. Blower 3. Deck lip 1. Impeller sheave 3. Spring loaded idler 2. Belt cover 2. Deck sheave 20. Install the knob and its hardw are . 17. P osition the belt co v er at an angle and slide it 21. Slip the upper and the lo w er tubes tog ether . under the mo w er frame (see Figure 15 ). 22. Inser t the upper tube into the hopper seal – push in then pull out so that the seal is extended outw ard. 23. Align the dimple on the upper

Résumé du contenu de la page N° 17

Operation tube to pro vide minim um obstr uction to flo w . Mak e sure that the upper and the lo w er ends are oriented properly as the tubes are assembled. (P ar ting lines should roughly be lined up .) Figure 19 30. F or LZUV3B Units Only: A. Install the remo v able caster w eights on the caster ar ms (see Figure 20 ). B . Inser t the clevis pin through the brac k et hole and fasten with a hair pin. C . Tighten knob on w eight assembly until the Figure 18 w eight is clamped securely to the cas

Résumé du contenu de la page N° 18

Operation has all necessar y lighting and marking as required b y loading units on trailers or tr uc ks . One full width la w . Secure a trailer with a safety c hain. ramp that is wide enough to extend bey ond the rear tires is recommended instead of indi vidual ramps for eac h side of the unit. T he lo w er rear section of the CAUTION tractor frame extends bac k betw een the rear wheels and ser v es as a stop for tipping bac kw ard. Ha ving T his unit does not ha v e pr oper tur n a full width

Résumé du contenu de la page N° 19

Operation Important: T he r oll bar is an integ ral and ef fecti v e safety device. K eep the r oll bar in the raised and lock ed position when operating the mo w er . Lo w er the r oll bar temporaril y onl y when a bsolutel y necessar y . R efer to the Operator’ s man ual supplied with y our tractor for additional R OPS safety and operating instr uctions . 19

Résumé du contenu de la page N° 20

Maintenance Maintenance Note: Deter mine the left and right sides of the mac hine from the nor mal operating position. W ARNING W ARNING W hile maintenance or adjustments ar e being T he engine can become v er y hot. T ouching made, someone could star t the engine. a hot engine can cause sev er e bur ns. Accidental star ting of the engine could Allo w the engine to cool completel y bef or e seriousl y injur e y ou or other bystander s. ser vice or making r epair s ar ound the engine R emo v e th


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 Exmark Ultra VAC Lazer Z Manuel d'utilisation Tondeuse 0
2 Exmark FontRunner FR23 Manuel d'utilisation Tondeuse 0
3 Exmark FMD 604 Manuel d'utilisation Tondeuse 1
4 Exmark FontRunner FR27 Manuel d'utilisation Tondeuse 1
5 Exmark FontRunner FR25 Manuel d'utilisation Tondeuse 0
6 Exmark FontRunner FR31 Manuel d'utilisation Tondeuse 0
7 Exmark FR20KC Manuel d'utilisation Tondeuse 2
8 Exmark FR27KC Manuel d'utilisation Tondeuse 2
9 Exmark FR23KC Manuel d'utilisation Tondeuse 0
10 Exmark FR604 Manuel d'utilisation Tondeuse 0
11 Exmark FR524 Manuel d'utilisation Tondeuse 0
12 Exmark FR724 Manuel d'utilisation Tondeuse 0
13 Exmark Frontrunner 4500-341 Manuel d'utilisation Tondeuse 2
14 Exmark Advantage Series 4500-466 Manuel d'utilisation Tondeuse 3
15 Exmark CD42CD Manuel d'utilisation Tondeuse 1
16 2Wire 7-1/4 Inch Circular Saw 94245 Manuel d'utilisation Tondeuse 3
17 Agilent Technologies E4371A Manuel d'utilisation Tondeuse 0
18 Agilent Technologies E4370A Manuel d'utilisation Tondeuse 3
19 Agilent Technologies E4374A Manuel d'utilisation Tondeuse 1
20 Adams 22 Manuel d'utilisation Tondeuse 1