Résumé du contenu de la page N° 1
04/06 Rev.5
AC20037
U.S. Patent No. 6,286,870
Page 1
Résumé du contenu de la page N° 2
Thank you for purchasing Demco’s SIDEQUEST. We feel you have made a wise choice and hope you are completely satisfied with your SIDEQUEST. If you have any questions regarding the applications of certain solutions or chemicals, contact your chemical supplier and follow chemical manufacturer recommendations as well as all licensing and use restrictions or regulations. WARNING: TO AVOID PERSONAL INJURY OR PROPERTY DAMAGE, OBSERVE FOLLOWING INSTRUCTIONS: Chemicals are dangerous. Know exactly what
Résumé du contenu de la page N° 3
Ag ❍ RV ❍ Warranty Registration Rental ❍ Dethmers Manufacturing Company Brakes ❍ 4010 320th Street • Box 189 • Boyden, Iowa 51234 Marine ❍ Toll Free 800-54DEMCO (800-543-3626) • FAX 800-845-6420 www.demco-products.com Very Very Satisfied Satisfied Dissatisfied Dissatisfied How satisfied are you with our product? ❍❍ ❍ ❍ How satisfied are you with the dealership/distributor sales staff? ❍❍ ❍ ❍ Dealer/Distributor Name City State How satisfied are you with the company sales staff? ❍❍ ❍ ❍ How satisf
Résumé du contenu de la page N° 4
Postage Dethmers Manufacturing Company 4010 320th Street, Box 189 Boyden, Iowa 51234 Page 4
Résumé du contenu de la page N° 5
SAFETY TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND SAFETY OF OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH. THIS SYMBOL MEANS ATTENTION BECOME ALERT YOUR SAFETY IS INVOLVED! SIGNAL WORDS Note: use of the following signal words DANGER, WARNING: WARNING, and CAUTION with safety messages. Indicates a potentially hazardous situation that, if Appropriate signal word for
Résumé du contenu de la page N° 6
SAFETY...YOU CAN LIVE WITH IT EQUIPMENT SAFETY GUIDELINES Every year many accidents occur which could be avoided by a few seconds of thought and more careful approach to handling equipment. You, the operator, can avoid accidents by observing precautions in this section. To avoid personal injury, study precautions and insist those working with you, or you yourself, follow them. In order to provide a better view, certain illustrations in this manual may show an assembly with a safety shield remo
Résumé du contenu de la page N° 7
SAFETY SIGN LOCATIONS Part# 10328 Red (on back side of tank) WARNING To prevent serious injury or death � Refer to chemical supplier and manufacturer recommendations and all licensing restrictions or regulations. � Always wear recommended protective clothing when working with chemicals or sprayer. � Dispose of all unused chemicals or solutions in proper and ecologically sound manner. Improper use can injure people, animals, plants and soil. REV 1 AB21014 AB21014 WARNING To prevent seriou
Résumé du contenu de la page N° 8
SAFETY SIGN CARE � Keep safety signs clean and legible at all times. � Replace safety signs that are missing or have become illegible. � Replacement parts that displayed a safety sign should also display current sign. � Safety signs are available from your distributor, dealer parts department, or manufacturer. How to install safety signs: � Be sure installation area is clean and dry. � Decide on exact position before you remove backing paper. � Remove smallest portion of split backing paper. �
Résumé du contenu de la page N° 9
� Keep wheel and lug nuts tightened to specified torque. � Assure that agricultural implement tires are inflated evenly. � Give sprayer a visual inspection for any loose bolts, worn parts, or cracked welds, and make necessary repairs. Follow maintenance safety instructions included in this manual. � Be sure there are no tools lying on or in equipment. � Do not use the sprayer until you are sure that area is clear, especially around children and animals. � Don't hurry learning process or take spr
Résumé du contenu de la page N° 10
� Pick the most level possible route when transporting across fields. Avoid edges of ditches, gullies, and steep hillsides. � Be extra careful when working on inclines. � Periodically clear equipment of brush, twigs, or other materials to prevent buildup of dry combustible materials. � Maneuver tractor or towing unit at safe speeds. � Avoid overhead wires or other obstacles. Contact with overhead lines could cause serious injury or death. � Avoid loose gravel, rocks, and holes; they can be dang
Résumé du contenu de la page N° 11
HIGHWAY AND TRANSPORT OPERATIONS � SAFETY CHAINS: If equipment is going to be transported on a public highway, always follow state and local regulations regarding safety chains and auxiliary lighting. Be sure to check with local law enforcement agencies for your own particular regulations. If required safety chains should be obtained and installed. Only safety chains (not elastic or nylon/plastic tow straps) should be used to retain connection between towing and towed machines in event of separa
Résumé du contenu de la page N° 12
� Watch for obstructions overhead and side to side while transporting. � Always operate equipment in a position to provide maximum visibility at all times. Make allowances for increased length and weight of sprayer when making turns, or stopping. PERFORMING MAINTENANCE � Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. � Make sure there is plenty of ventilation. Never operate engine of towing vehicle in a closed building. Exhaust fumes may cause asphyxiation
Résumé du contenu de la page N° 13
BOLT TORQUE TORQUE DATA FOR STANDARD NUTS, BOLTS, AND CAPSCREWS. Tighten all bolts to torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt chart as guide. Replace hardware with same grade bolt. NOTE: Unless otherwise specified, high-strength Grade 5 hex bolts are used throughout assembly of equipment. Bolt Torque for Standard bolts * Torque Specifications GRADE 2 GRADE 5 GRADE 8 “A” lb-ft (N.m) lb-ft (N.m) lb-ft (N.m) 1/4” 6 (8) 9 (12) 12 (16) 5/1
Résumé du contenu de la page N° 14
Rear of Tractor Front of Tractor Rear of Tractor Front of Tractor JOHN DEERE 7510, 7520, 7600, 7700, 7800, 7610, 7710, 7810 OVER-HEAD MOUNTING BRACKETS 14 14 10 10 11 NOTE: Front fenders 7 8 5 need to be removed before installation of 13 9 brackets. 12 9 3 8 6 2 7 1 13 11 12 4 7600-7800 & 7610-7810 Series 3 2 REF. PART 10 QTY. DESCRIPTION NO. NO. 10 1. 00482 81/2”-13UNC x 1 3/4” Hex Hd Bolt (Gr.5) 2. 00084 81/2” Lockwasher 3. 00083 81/2”-13UNC Hex Nut 4. 11660-35 1 Left Baseplate for Sidequest
Résumé du contenu de la page N° 15
Rear of Tractor Front of Tractor Rear of Tractor Front of Tractor JOHN DEERE 8100, 8110, 8120, 8200, 8210, 8220, 8300, 8310, 8320, 8400, 8410, 8420, & 8520 OVER-HEAD MOUNTING BRACKETS 8 8 3 3 6 NOTE: Front fenders must be removed before installation of brackets. 7 5 7 1 7 4 2 8000 Series 7 REF. PART 1 NO. NO. QTY. DESCRIPTION 6 2 1. 02397 4 Lynch Pins 2. 11651-95 2 Upper Pins 3. 11442-35 4 Drop Channels 3 4. 11645-35 1 Lt. Baseplate 3 5. 11646-35 1 Rt. Baseplate 6. 11644-35 2 Extension A
Résumé du contenu de la page N° 16
Rear of Tractor Front of Tractor Rear of Tractor Front of Tractor 8 JOHN DEERE 30’S IVT OVER-HEAD 8 MOUNTING BRACKETS 3 6 3 7 5 7 1 4 7 7 2 7 1 7 30 Series IVT REF. PART 6 2 7 NO. NO. QTY. DESCRIPTION 1. 02397 4 Lynch Pins 8 2. 11651-95 2 Upper Pins 3. 11442-35 4 Drop Channels 8 4. 12333-35 1 Lt. Baseplate 3 5. 12332-35 1 Rt. Baseplate 6. 11644-35 2 Extension Arms 3 7. 03840 8 20mm X 2.5mm Metric Bolt (Gr. 10.9) 8. 06102 4 1/2”NC x 1-1/4” Cup Point Set Screw NOTE: Front fenders Please order re
Résumé du contenu de la page N° 17
Rear of Tractor Front of Tractor Rear of Tractor Front of Tractor TG SERIES NEW HOLLAND OVER-HEAD MOUNTING BRACKETS TG Series New Holland REF. PART 8 QTY. NO. NO. DESCRIPTION 8 1. 11442-35 4 Drop Channels 1 2. 11644-35 2 Extension Arm 1 3. 03840 8 20mm x 2.5mm X 50mm Metric Bolt (Gr. 10.9) 4. 11647-35 1 Left Baseplate for Sidequest 5. 11648-35 1 Right baseplate for Sidequest 6. 11651-95 2 Upper Pin 7. 02397 4 Lynch Pin 8. 06102 4 1/2” NC x 1.25” Cup Point Set Screw NOTE: Front fenders, if 2 3
Résumé du contenu de la page N° 18
JOHN DEERE 8000 TRACK MOUNTING BRACKETS AND SKID PART REF. NO. QTY. DESCRIPTION NO. 1. 12315-35 1 Right Baseplate for Sidequest 2. 12316-35 1 Left Baseplate for Sidequest 3. 02851 83/4”-10UNC x 8.50 Hex Head Bolt (Gr. 5) 4. 02961 83/4”-10UNC Nylon Insert Lock Nut 5. 12317 12 20mm-2.5 x 250mm Hex Bolt 6. 12186-95 4 Top Pin 1.25 x 10.25 12 7. 02397 8 Lynch Pin 8. 12185-35 4 Extension Arm 9. 00085 24 1/2” Flat Washer 11 10. 01254 24 1/2”NC x 1.50 Hex Head Bolt (Gr. 5) 11. 02178 24 1/2”NC Nylon In
Résumé du contenu de la page N° 19
JOHN DEERE 9000 TRACK MOUNTING BRACKETS AND SKID PART REF. NO. QTY. DESCRIPTION NO. 1. 12183-35 2 Right Baseplate for Sidequest 2. 12184-35 2 Left Baseplate for Sidequest 3. 03840 32 20mm-2.5 x 50mm Hex Bolt 6. 12186-95 4 Top Pin 1.25 x 10.25 7. 02397 8 Lynch Pin 8. 12185-35 4 Extension Arm 12 9. 00085 24 1/2” Flat Washer 10. 01254 24 1/2”NC x 1.50 Hex Head Bolt (Gr. 5) 11. 02178 24 1/2”NC Nylon Insert Lock Nut 11 12. 35631 2 350gal. Skid Assembly (tank not shown) - 35632 2 500gal. Skid Assembl
Résumé du contenu de la page N° 20
CAT MT765 CHALLENGER MOUNTING BRACKETS AND SKID 6 1 7 5 6 17 18 12 *Note: For installing Hub 15 18 Spacer remove every other 16 bolt from hub on tractor. 15 15 10 13 16 16 15 16 19 3 20 4 9 4 2 8 19 9 10 17 8 18 13 15 16 18 REF. PART 14 15 15 16 QTY. DESCRIPTION NO. NO. 16 1. 5619-35 2 Spindle Assembly (details on p.21 view B 15 16 & view C & Breakdown on p.22 11 15 16 14 2. 12334-30 1 Right Baseplate for Sidequest 3. 12335-30 1 Left Baseplate for Sidequest 4. 12379-30 2 Back Plate 5. 12378-35
