Résumé du contenu de la page N° 1
Operator's Manual
(RRFTSMRN°
LAW TRACTO
24.0 HR* 42" Mower
Electric Start
6 Speed Transaxle
Model No.
917.28925
• EspaSol, p. 33
This product has a low emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
IMPORTANT:
For answers to your questions
about this product, Call:
Read and follow all Safety
1-800-659-5917
Rules and Instructions before
Sears Craftsman Help Line
operating this equipment.
5 am - 5 pm,
Résumé du contenu de la page N° 2
Maintenance Schedule ........................ 16 Warranty ................................................ 2 Safety Rules .......................................... 3 Service and Adjustments ..................... 21 Product Specifications ........................... 6 Storage ................................................ 27 Assembly/Pre-Operation ....................... 7 Troubleshooting ................................... 28 Sears Service ........................ Back Cover Operation .......
Résumé du contenu de la page N° 3
,_DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. _,WARNING: In order to prevent acciden- • Never direct discharged materialtoward tal starting when setting up, transporting, anyone. Avoid discharging material against a wall or obstruction. Material adjusting or making repairs, always discon- nect spark plug wire and place wire where may ricochet back toward th
Résumé du contenu de la page N° 4
li. SLOPE OPERATION • Never carry children, even with the blades shut off. They may fall off and Slopes are a major factor related to loss of be seriously injured or interfere with safe control and tip-over accidents, which can machine operation. Children who have result in severe injury or death. Operation been given rides inthe past may suddenly on all slopes requires extra caution. If you appear in the mowing area for another cannot back up the slope or if you feel uneasy ride and be run over
Résumé du contenu de la page N° 5
• Keep the nozzle in contact with the rim • If you strike a foreign object, stop and of the fuel tank or container opening at inspectthe machine. Repair, if necessary, all times until fueling is complete. Do not before restarting. use a nozzle lock-open device. • Never make any adjustments or repairs • Iffuel is spilled on clothing, change cloth- with the engine running. ing immediately. • Checkgrasscatchercomponentsandthe • Never overfill fueltank. Replace gas cap discharge chute frequently and
Résumé du contenu de la page N° 6
In the state of California the above is PRODUCT SPECIFICATIONS required by law (Section 4442 of the Gasoline Capacity 3.00 Gallons California Public Resources Code). Other and Type: Unleaded Regular states may have similar laws. Federal laws apply on federal lands. A spark ar- Oil Type SAE 30 (above 32°F ' rester for the muffler is available through (API-SG-SL): SAE 5W30 (below 32°F your nearest Sears service center (See Oil Capacity: W/Filter: 64 oz. REPAIR PARTS manual). W/O Filter: 60 oz. REP
Résumé du contenu de la page N° 7
Slope Sheet Keys (1) Oil Drain Tube For Future Use (2) Keys Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TO CHECK BATTERY TOOLS REQUIRED FOR ASSEMBLY 1. Lift hood to raised position. A socket wrench set will make assembly easier. Standard wrench sizes are listed. NOTE: If this battery is put into service after month and year indicated on label (label is (1) 1/2" wrench Tire pressure gauge located between terminals) c
Résumé du contenu de la page N° 8
NOTE: Youmay now roll your tractor off ,/CHECKLIST the skid. Followthe appropriate instruction Before you operate your new tractor, we belowto removethe tractor from the skid. wish to ensure that you receive the best _b, WARNING" Before starting, read, un- performance and satisfaction from this derstand and follow all instructions in the Quality Product. Operation section of this manual. Ensure Please review the following checklist: tractor is in a well-ventilated area. Ensure ,/* All assembly i
Résumé du contenu de la page N° 9
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. R N H L I\1 REVERSE NEUTRAL HIGH LOW CHOKE FAST SLOW iGNITION SWITCH ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LiFT OPERATION SYSTEM (ROS) ,t J; LIGHTS ON CRUISE CONTROL CLUTCH/BRAKE FUEL BATTERY REVERSE FORWARD PEDAL ATTACH M ENT ATTACHMENT DANGER, KEEP HANDS KEEP AREA CLEAR SLOPE HAZARDS CLUTCH DISENGAGED CLUTCH ENGAGED AND FEET AWAY (SEE SAF
Résumé du contenu de la page N° 10
KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. 03078 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used (F) IGNITION SWITCH - Used for starting to raise and lower the mower or other at- and stopping the engine.
Résumé du contenu de la page N° 11
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the se
Résumé du contenu de la page N° 12
TO MOVE FORWARD AND TO ADJUST GAUGE WHEELS BACKWARD Gauge wheels are properly adjusted is when they are slightly off the ground when The direction and speed of movement mower is at the desired cutting height in controlled by the gearshift lever (J). operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain condi- tions. NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. Adjust mower to desired cutting height (See "TO ADJUST MO
Résumé du contenu de la page N° 13
TO OPERATE ON HILLS _I_,WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual. • Choose the slowest speed before start- ing up or down hills. • Avoid stopping or changing speed on hills. • If stopping is absolutely necessary, push REVERSE OPERATION SYSTEM (ROS) clutch/brake pedal quickly to brake posi- Your tractor is equipped with a Reverse tion and engage parking brake. Operation System (R
Résumé du contenu de la page N° 14
BEFORE STARTING THE ENGINE TO START ENGINE CHECK ENGINE OIL LEVEL When starting the engine for the first time or if the engine has run out of fuel, it will The engine in your tractor has been take extra cranking time to move fuel from shipped, from the factory, already filled the tank to the engine. with summer weight oil. 1. Sit on seat in operating position, 1. Check engine oil with tractor on level depress clutch/brake pedal and set ground. parking brake. 2. Remove oil fill cap/dipstick and w
Résumé du contenu de la page N° 15
MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive so that clippings are discharged onto the area that has already been cut. Have the cut area to the right of the tractor. This will result in a more even distribution of clippings and more uniform c
Résumé du contenu de la page N° 16
MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE SCHEDULE EACH 8 25 50 100 SEASON STORAGE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems A Check for Loose Fasteners v' C ChecWReplace Mower Blades T Lubrication Chart v' 0 Check Battery Level R Clean Battery and Terminals Clean Debris Off Steering Plate Check Transaxle Cooling Check Mower Levelness Check V-Belts v' m Check Engine Oil Level _12 v" Change Engine Oil (with oil filt
Résumé du contenu de la page N° 17
TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rules when per- forming any maintenance. • When the engine is running with the BRAKE OPERATION ignition switch in the engine "ON" posi- tion and the attachment clutch engaged, If tractor requires more than five (5) feet to any attempt by the operator to drive in stop at highest speed in highest gear on a reverse should shut off the engine. level, dry concrete or paved surface, then • When the engine is running with the brake must
Résumé du contenu de la page N° 18
TO CLEAN BATTERY AND TERMINALS 1. Remove oil fill cap/dipstick. Be careful Corrosion and dirt on the battery and termi- not to allow dirt to enter the engine when nals can cause the battery to "leak" power. changing oil. 1. Disconnect BLACK battery cable first 2. Removeyellowcapfromendofdrainvalve then RED battery cable and remove and install the drain tube onto the fitting. battery from tractor. 3. Unlock drain valve by pushing inward 2. Rinsethe batterywith plain waterand dry. slightly and tur
Résumé du contenu de la page N° 19
ENGINE COOLING SYSTEM CLEANING • Clean engine, battery, seat, finish, etc. To ensure proper cooling, make sure the of all foreign matter. grass screen, cooling fins, and other exter- • Clean debris from steering plate. nal surfaces of the engine are kept clean Debris can restrict clutch/brake pedal at all times. shaft movement, causing belt slip and Every 100 hours of operation (more often loss of drive. under extremely dusty, dirty conditions), remove the blower housing and other cooling CAUTIO
Résumé du contenu de la page N° 20
DECK WASHOUT PORT 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from Your tractor's deck is equipped with a the nozzle washout port. washout port on its surface as part of its 10. Move the tractor to a dry area, prefer- deck wash system. It should be utilized af- ably a concrete or paved area. Place ter each use. the attachment clutch control in the 1. Drive the tractor to a level, clear spot "ENGAG ED" position to remove excess on your lawn, near enough to a water
