Instruction d'utilisation DSC FM-3000

Résumé du contenu de la page N° 1

DSC Position Polling with
FM-3000 and NavNet VX2
When any NavNet VX2 display is connected to the FM-3000 VHF radio, DSC
position reports can be received from another DSC capable VHF transceiver, then
shown on VX2's plotter as a waypoint. This capability allows two or more vessels
to transmit their position to each other via VHF, then r ecord that position
information as a waypoint on the VX2's plotter.

Résumé du contenu de la page N° 2

Connection Diagram, 10.4" VX2 Use Optional 000-117-603 Cable to connect the VX2 to the RCA type connectors on the back of the FM-3000. Set the VX2's NMEA port to output RMC and GGA. RED NMEA In RCA Jack - White wire from Plotter to Center Conductor (+) and Black wire from plotter to Outer (-) WHT BLACK White NMEA OUT RCA Jack - Yellow wire from Plotter to Center Conductor (+) and Green wire YELLOW from plotter to outer (-) GREEN 000-117-603 Cable to NMEA Port 2

Résumé du contenu de la page N° 3

Connection Diagram, 7" VX2 Use Optional 000-144-418 Cable to connect the VX2 to the RCA type connectors on the back of the FM-3000. Set the VX2's NMEA port to output RMC and GGA. RED NMEA In RCA Jack - White wire from Plotter to Center Conductor (+) and Shield wire from plotter to Outer (-) WHT SHIELD White NMEA OUT RCA Jack - Yellow wire from Plotter to Center Conductor (+) and Green wire YELLOW from plotter to outer (-) GREEN 000-144-418 Cable to data 3