Instruction d'utilisation Sealy SUPERSTART 310.V2

Résumé du contenu de la page N° 1

INSTRUCTIONS FOR:
SUPERSTART
STARTER/CHARGERS
MODELS: SUPERSTART 220.V2 SUPERSTART 310.V2
SUPERSTART 320/1.V2 SUPERSTART 410.V2 SUPERSTART 420/1.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will give you years of trouble free performance if these instructions are
carefully followed and the product is correctly maintained.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND

Résumé du contenu de la page N° 2

1.4. GENERAL SAFETY INSTRUCTIONS 3 Familiarise yourself with the application, limitations and potential hazards relating to starter/chargers. Also refer to the vehicle manufacturerís hand book. IF IN ANY DOUBT CONSULT AN ELECTRICIAN. 3 Ensure the starter/charger is in good order and condition before use. If in any doubt do not use the unit and contact an electrician. 3 Only use recommended attachments and parts. To use non-recommended items may be dangerous and will invalidate your warranty. 3 U

Résumé du contenu de la page N° 3

3.3. CHARGING THE BATTERY 3.3.1 Set the mode switch to ëchargeí, indicated by the battery symbol. 3.3.2. Set the required rate of charge by using the charge level switches as shown in fig.1 or fig.2. ( Please note that when MAX is selected in fig.2 the switch marked 1 & 2 is over-ridden.) 3.3.3 Connect the charger to the mains power supply. 3.3.4. Check the current delivery to the battery by reading the ammeter on the front of the battery charger (fig.3 ammeter face may vary by model). Initial