Résumé du contenu de la page N° 3
Touch Screen Operation 3 You can use Windows by touching the screen in the same way as you use a mouse. The screen of this computer has following two pointing device functions. Digitizer: can be operated with the digitizer pen (included) Touchscreen: can be operated with your finger etc. If you touch the screen with the digitizer pen and your finger at the same time, the operation by the digitizer pen is enabled. To right-click A You can perform “Righ
Résumé du contenu de la page N° 4
Touch Screen Operation 4 Check the following to prevent the surface of the screen from being scratched Are you using the digitizer pen or your finger to operate the screen? Is the surface clean? Is the cloth clean? Is the tip of the digitizer pen clean? Is your finger clean? Things to keep in mind when using the screen Do not touch the screen outside of the LCD display area The input area is defined by the LCD display screen. Touching the screen outside of the display area may result malf
Résumé du contenu de la page N° 5
Touch Screen Operation 5 Calibration Digitizer Calibration To calibrate the digitizer, use the digitizer pen and follow the steps below. 1 Click [start] - [Control Panel] - [Printers and other Hardware]. 2 Click [Tablet and Pen Settings]. 3 Click [Calibrate...] in [Settings]. 4 Using the digitizer pen, touch each of 4 “+” target marks one by one, and then click [OK]. Touchscreen Calibration To calibrate the touchscreen, use your finger or other objects and follow the steps below. Do not use th
Résumé du contenu de la page N° 6
Hardware Buttons 6 RFID Barcode RFID Camera Camera RFID RFID Barcode Application Application Buttons Buttons Security Security Button Function Camera Button Take still pictures. ( page 30) RFID Reader Button Read the data from RFID tags. ( page 31) *1 Barcode Reader Button Read the barcode. *1 Application Buttons Start the registered function or application. ( page 11) *2 Security Button Works as Ctrl + Alt + Del. *1 Only for mod
Résumé du contenu de la page N° 7
Hardware Buttons 7 *2 Only for model without the Barcode Reader NOTE The Hardware buttons work when the Windows screen is displayed. The Hardware buttons may not work immediately after Windows is started up or the Windows logon screen (or the Welcome screen) is displayed.
Résumé du contenu de la page N° 8
Panasonic Dashboard 8 You can perform the following operations by using Panasonic Dashboard. Check the remaining battery charge Change the LCD brightness Change the camera light settings Change the screen color of Cleaning Utility Enable or disable the touchscreen operation Start the application software which you registered Change the settings of cleaning reminder, RFID, touchscreen, button assignment of Panasonic Dashboard and applica- tion buttons *1 1 Press the application button [A2]
Résumé du contenu de la page N° 9
Panasonic Dashboard 9 [Touchscreen] (F) When a check mark for [Enable digitizer pen only] is added, you can use only the digitizer pen (included) to operate by touching the screen. You cannot use the other stylus or the finger. We recommend to add a check mark for this, when you place the palm on the screen and touch the screen by using the digitizer pen. This setting is stored for each user. Software buttons (G) You can start the application software which you registered. You can change the r
Résumé du contenu de la page N° 10
Panasonic Dashboard 10 A Click any button. B Select the application from [Action]. You can select [Display Rotation], [Cleaning Utility], [Reference Manual] or [Launch Application]. To restore the default setting, click [Restore Default]. When you select [Launch Application], input the label to [Label] box, and select a file you wish to execute. You can also select files with extensions .pdf, .jpeg, .wma, etc. other than .exe. When you select a file with extension .exe, you can specify the p
Résumé du contenu de la page N° 11
Application Button Setting 11 You can assign the startup functions of your favorite applications to the Applications Buttons. 1 Click [start] - [All Programs] - [Panasonic] - [Application Button Setting]. You can also start up Application Button Setting Utility from Panasonic Application Dashboard ( page 8). Buttons 2 Make the settings. You can register the execute files of the applications. NOTE Button [A3] is not displayed.
Résumé du contenu de la page N° 12
Application Button Setting 12 1 Select the action from [Action] of each button. You can select [], [Dashboard], [Display Switch], [Right Click], [Cleaning Utility], [Reference Manual] or [Launch an Application]. To restore the default setting, click [Restore Default]. When you select [Launch an Application], input the label to [Label] box, and select a file you wish to execute. You can also select files with extensions .pdf, .jpeg, .wma, etc. other than .exe. When you select a file w
Résumé du contenu de la page N° 13
Panasonic Hand Writing 13 You can make a bitmap file (.bmp) of a simple character and a figure such as signature by handwriting on the screen. CAUTION Do not use the Fast User Switching function while Panasonic Hand Writing is active. If you install other pointing devices (e.g., commercially available mouse driver), Panasonic Hand Writing will not work. NOTE The display of Panasonic Hand Writing may be distorted if the number of display colors is changed. Right-click on the notification are
Résumé du contenu de la page N° 14
Display Rotation 14 Rotating the Display 1 Press [A1] button (A). Each time you press the button, the screen display rotates counter- A clockwise by 90°. When the computer is set to the Cradle, the screen display does not rotate. If you want to rotate the screen display even if the computer is set to the Cradle, follow the step below. A Click on the notification area and click one of the display angles. NOTE Alternatively you can rotate the display by the following procedure. Click [start]
Résumé du contenu de la page N° 15
Standby and Hibernation Functions 15 Starting Up Your Computer Quickly The standby or hibernation functions allow you to shut off the computer without closing programs and documents. You can quickly return to the programs and documents that you were working on before standby or hibernation. Function Data is saved to Recovery time Power supply Standby Memory Short Required. (If power is not supplied, all data will be lost.) Hibernation Hard disk Rather long Not required. (However power is slight
Résumé du contenu de la page N° 16
Standby and Hibernation Functions 16 C Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced], and add a check mark in [Prompt for password when computer resumes from standby]. Do not enter standby or hibernation in the conditions below, otherwise the data or file may be corrupted, standby or hiber- nation may not work, or malfunction may occur in the computer or the peripheral devices. • When any of the hard disk drive indicator and the RFID indicator
Résumé du contenu de la page N° 17
Standby and Hibernation Functions 17 It may take 1 or 2 minutes to enter standby or hibernation. In standby or hibernation Do not attach or remove a peripheral device (including the Cradle). Doing so may cause malfunction. Power is consumed in standby. When power is exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the standby function. To resume from standby or hibernation 1 Press the power switch(A). A CAUTION Do not perform the following operations
Résumé du contenu de la page N° 18
Saving Power 18 You can extend battery life and save power also during AC adaptor usage. Reducing Power Consumption Use the methods below to reduce power consumption. Change [Power Options] Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] to select [Max Battery] under [Power schemes]. While [Portable/Laptop] is selected under [Power Options] as the factory default, selecting [Max Battery] will further reduce power consumption. Also, make detailed settings
Résumé du contenu de la page N° 19
Security Measures 19 Use these features to protect your data. Setting the Supervisor Password/User Password Set the Supervisor Password before setting the User Password. Preparation Set the computer to the Cradle and connect an external keyboard to the Cradle. 1 Start up the Setup Utility ( page 53). 2 Select [Security]. 3 Select [Set Supervisor Password] or [Set User Password], and press (Enter). 4 Enter your password in [Enter New Password] and press (Enter). When the password has been se
Résumé du contenu de la page N° 20
Security Measures 20 Preventing Your Computer from Unauthorized Use You can set a start-up password to protect your computer from unauthorized use. 1 Set the password ( page 19), and select [Enabled] in [Password on Boot] in the [Secu- rity] menu of the Setup Utility ( page 58). NOTE To enter the password, you need to set the computer to the Cradle and connect an external keyboard to the Cradle. If the Supervisor Password or User Password has been set, the password input screen will be displ
