Résumé du contenu de la page N° 1
1
Reference Manual
Personal Computer
Model No. CF-C1 Series
Model No. CF-F9 Series
Model No. CF-S9 Series
We recommend that this Reference Manual be printed.
Résumé du contenu de la page N° 2
Read Me First 2 Illustrations and Terminology in this Reference Manual NOTE NOTE provides a useful fact or helpful information. CAUTION CAUTION indicates a condition that may result in minor or moderate injury. Enter This illustration means to press the Enter key. Fn+F5 This illustration means to press and hold the Fn key, then press the F5 key. When using with the Fn key and the Ctrl key functions interchanged, read with the Fn key and the Ctrl key reversed. Windows 7 This illustration means t
Résumé du contenu de la page N° 3
Read Me First 3 Windows 7 Sound and Video Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in PC Cards and SD Memory Cards may be interrupted during playback. If this happens, copy them to the hard disk drive and play back. Sound and video in AVI files may be interrupted or produce a time-lag during playback. If this happens, Click or on the notification area. Select [High performance]. This may remedy the problem. Depending on the processing status on Windows, sound may be interr
Résumé du contenu de la page N° 4
Using the Touch Pad 4 In this section, illustrations of the CF-C1 Series are used as examples. Use the Touch Pad to move the cursor on the screen and perform computer operations. A. Work Surface (Touch Pad) B. Left Button C. Right Button Function Operation Moving the Cursor Move the tip of your finger lightly over the work surface. Tapping/Clicking tapping or clicking To right-click: Can only be performed by clicking the right button. Double-Tapping/ Double-Clicking double-tapping or double-cl
Résumé du contenu de la page N° 5
Using the Touch Pad 5 Function Operation Dragging Two quick taps, but on the second tap leaving your finger down (applying pressure) and moving it on the work surface. or While holding down the button, moving your finger on the work surface. Scroll Trace a circle around the Touch Pad. ( below) NOTE Windows 7 You can change the speed of the double-click or the operations of mouse buttons by clicking (Start) - Windows XP [Control Panel] - [Hardware and Sound] - [Mouse]/ [start] - [Contro
Résumé du contenu de la page N° 6
Using the Touch Pad 6 Using the Touch Pad Utility You can scroll easily by tracing a circle on the Touch Pad. NOTE External mouse drivers cannot be used at the same time as the Touch Pad utility. 1 Make the following settings to use the horizontal scroll. Once the settings have been made, it is not necessary to make the same settings the next time. Windows 7 A Click on the notification area and click . Windows XP Click on the notification area. B click [Settings]. When is not displayed: Win
Résumé du contenu de la page N° 7
Using the Touch Pad 7 3 Remove your finger from the pad, then place your finger in the appropriate area to begin scrolling. The finger position on the Touch Pad can be changed using the Touch Pad utility. ( page 8) This explanation assumes in the default setting. *1 Vertical scroll Horizontal scroll Position where finger is placed When you place your finger on the Touch Pad, the icon changes. Windows 7 Icon / Windows XP on the notification area *1 If the horizontal scroll function has n
Résumé du contenu de la page N° 8
Using the Touch Pad 8 *2 Vertical scroll Horizontal scroll Trace counter-clockwise To scroll up To scroll left *2 When the horizontal scroll function has not been enabled, any scrolling will be vertical scrolling. The screen will not scroll if you trace toward the center of the Touch Pad. On screens that cannot be scrolled (e.g., desktop screen), if you scroll, the computer may try to scroll the screen, causing the cursor to freeze. If this happens, remove your finger from the Touch Pad an
Résumé du contenu de la page N° 9
Using the Touch Pad 9 4 Click [OK]. NOTE Because the Touch Pad utility and the Virtual Scrolling function both offer scrolling functions that use the Touch Pad, these two features cannot be used simultaneously. If you try to use them at the same time, a message may be displayed asking you if you want to enable the Touch Pad utility. • To use the Touch Pad utility: Click [Yes]. The Virtual Scrolling function will be disabled. • To use the Virtual Scrolling function: Click [No]. You can unins
Résumé du contenu de la page N° 10
Using the Touch Pad 10 Handling the Touch Pad By design, the Touch Pad is to be used with a fingertip only. Do not place any object on the work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens). Try to avoid having any harmful substances, such as oil, come in contact with the Touch Pad. The cursor may not work properly in such cases. When the Touch Pad becomes dirty: Wipe to remove dirt by usin
Résumé du contenu de la page N° 11
Screen Input Operation 11 The screen of your computer allows you to perform the same operations as the Touch Pad or mouse by touching its surface. The computer supports, using the digitizer pen(included) and your fingers. The computer supports, using the stylus (included) and your fingers. In this manual, the digitizer pen and the stylus are referred to as the “pen (included)”. The operation settings can b
Résumé du contenu de la page N° 12
Screen Input Operation 12 Functions Operation Double-clicking (Double-tapping) Two quick taps Dragging Touch and hold the object (i.e. file or icon), move the pen (included) on the surface (dragging the object to the desired location), then release the pen (included). To right-click You can choose either of the two ways below. Touch and hold the object with the pen (included), and release the pen when a circle surrounding the object appears. Press and hold
Résumé du contenu de la page N° 13
Screen Input Operation 13 Windows XP A Touch the item you want to right-click and continue touching until is completely displayed. B Move the pen (included) away from the surface of the display. Moving the pen (included) away from the surface of the display before has not completely displayed will result in a left click. When needed, the above settings can be configured using the following procedure. A Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Setti
Résumé du contenu de la page N° 14
Screen Input Operation 14 Functions Operation Dragging Touch and hold the object (i.e. file or icon), move the finger on the surface (dragging the object to the desired location), then release the finger. The following operations may not be possible depending on the application program being used. Functions Operation Zoom in, zoom out Use two fingers to touch the image or text you want to zoom in or out on, and draw your fingers apart to zoom in and together to zoom out. Rotate Use two fing
Résumé du contenu de la page N° 15
Screen Input Operation 15 CAUTION If a change is made to the display resolution, or the cursor cannot be pointed correctly with the pen (included), be sure to calibrate the screen. ( page 15) When mouse drivers are installed (e.g., IntelliMouse), the screen function may not be used. When the operation of panning (only the internal LCD) is performed while the display resolution is set higher than the resolution of the internal LCD, the screen function will not work properly. Even when only
Résumé du contenu de la page N° 16
Screen Input Operation 16 4 If [User Account Control] is displayed, click [Yes]. 5 Using the digitizer pen or finger, touch each of the “+” target marks one by one, and then click [Yes]. Calibration by a standard user NOTE Perform the following calibration for each user. 1 Run [Tablet PC Settings]. Click (start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings]. 2 Click [Calibrate]. 3 Click [Pen input] or [Touch input]. To calibrate the screen for the digitizer pen operation, c
Résumé du contenu de la page N° 17
Screen Input Operation 17 5 Click [OK] for the digitizer pen operation, or [Finished] for the finger operation. Windows 7 Calibration by an administrator NOTE At first, log on to Windows as an administrator, and perform this calibration. Rotate the display to primary landscape before performing the calibration. ( page 22). 1 Run [Tablet PC Settings]. Click (start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings]. 2 Click [Calibrate]. 3 If [U
Résumé du contenu de la page N° 18
Screen Input Operation 18 Windows XP Calibration by an administrator If an administrator performs calibration once, other administrators will not need to do even if multiple user accounts are cre- ated. This does not need to be performed two times or more for one computer. 1 Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings]. 2 Set the following with [Calibration] in [Settings]. 3 Using the stylus, touch each of the “+” target marks one by one, and then
Résumé du contenu de la page N° 19
Screen Input Operation 19 The screen uses electromagnetic induction and may not work properly near strong electrical field or magnetic field such as: • Near AM radio base station or relay station antennas • Near CRT displays that generate strong electromagnetic field noise Move the screen away from such locations so it will work properly. Handling the pen (included) Clean the pen (included) tip and screen prior to operation. Foreign particles can scratch the sc
Résumé du contenu de la page N° 20
Tablet Buttons 20 Button Function LCD Brightness : down : up Input Panel Tablet PC Input Panel on/off This button does not work on the Welcome screen. Rotation Rotates the display. ( page 22) Do not press the button again until the display rotation is completed. Security Works as Ctrl + Alt + Del. USER Dashboard for CF-C1 on/off ( page 33) NOTE The Tablet buttons work when the Windows screen is displayed. The Tablet buttons may not work immediately after Windows is
