Résumé du contenu de la page N° 1
ORDER NO. CPD0604069C1
Notebook Computer
CF-29
This is the Service Manual for
the following areas.
M …for U.S.A. and Canada
Model No. CF-29N3LGZBM
© 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
Résumé du contenu de la page N° 2
WARNING For U.K. This apparatus must be earthed for your safety. To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connec- tion to earth. Wrongly wired extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power poi
Résumé du contenu de la page N° 3
LASER SAFETY INFORMATION For U.S.A. Class 1 LASER-Product This product is certified to comply with DHHS Rules 21 CFR Subchapter J. This product complies with European Standard EN60825 (or IEC Publication 825) For all areas This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation. Caution: (1) Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. (2) The drive is desi
Résumé du contenu de la page N° 4
3
Résumé du contenu de la page N° 5
4
Résumé du contenu de la page N° 6
CONTENTS 1 Diagnosis Procedure ······································································································1-1 2 Power-On Self Test (Boot Check) ··················································································2-1 3 List of Error Codes ··········································································································3-1 4 Diagnostic Test ·····················································································
Résumé du contenu de la page N° 7
1 Diagnosis Procedure 1.1. Basic Procedure 1-1
Résumé du contenu de la page N° 8
1.2. Troubleshooting Please take note of the following two points with regard to troubleshooting: 1. Know-how of diagnosis upon occurrence of heavy troubles, e.g. ‘Set cannot be turned ON’, ‘Set fails to start’, ‘No display on screen’, etc. 2. Explanation of each trouble, mainly symptom of trouble in operation. Flow Chart Pay attention to the following points when in pursuit of the cause of a troubleshooting. 1. Peripheral apparatus connected with the set should all be removed before op
Résumé du contenu de la page N° 9
2 Power-On Self Test (Boot Check) Outline of POST The set has a boot check function called POST (Power-On Self Test) in it. The condition of the main body is diagnosed by checking beep sound or error code. Start .............Test begins automatically when power switch is set to ON. Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop. Note: If no error occurs, nothing is displayed. (No display of OK, etc.) Error Diagnosis by Checking
Résumé du contenu de la page N° 10
3. List of Error Codes The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If your system displays one of except the messages marked bel
Résumé du contenu de la page N° 11
02D0 System cache error - Cache disabled Contact Panasonic Technical Support. 02F0: CPU ID: CPU socket number for Multi-Processor error. 02F4: EISA CMOS not writable ServerBIOS2 test error: Cannot write to EISA CMOS. 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error:
Résumé du contenu de la page N° 12
4. Diagnostic Test 4.1 Equipment (1) Test Computer ································································································ 1 unit (2) AC Adapter ····································································································· 1 pc. (3) External Printer ······························································································· 1 unit (4) Loopback Plug (Parallel Port Test) [ P/N: DFWV95C0081 ] ···························
Résumé du contenu de la page N° 13
5 Self Diagnosis Test 1. Floppy disk is included for the self-diagnostic tests that should be performed before using this product. 2. Connect External Floppy Disk Drive (FDD) to USB port for diagnosis test. Important notice System password This product has a password function. If this function is turned on, the self-diagnostics tests will not work. You will need ask the user for the password before performing the self-diagnostics. 5.1. Outline of Self Diagnostic Tests Insert the diagnostics flop
Résumé du contenu de la page N° 14
5.1.1. List of main test items The selection item displays the items selected under Automatic test. If you select Automatic test, these test items will be performed automatically. You can use Selection test to choose items from the menu screen that you want to have tested. These items are shown below. Test classification Test items shown on the screen Contents Select 1 SPEAKER TEST Speaker test 2 VESA MODE TEST VESA mode test CPU 3 A20 GATE TEST Address A20 line (CPU related) 4 CACHE ON/OFF TEST
Résumé du contenu de la page N° 15
Speaker test, VESA test The speaker test involves listening to music and choosing OK or Not okay. The VESA test involves looking at the display to see if it is satisfactory then choosing OK or Not okay. Serial loop back test The Automatic test’s initial settings are set so that the serial loop back test will be executed. Connect the serial loop back jig and then perform the test. (This test is not executed on default mode) Diagnostics result If no errors occur. The screen shows the word "Pass" i
Résumé du contenu de la page N° 16
5.4. Test Selection Starting up the input menu 1. From the menu screen shown below, choose Quit and press Enter. 1. DIAG on FD 2. LAN test 3. Modem test 4. Wireless LAN test (Wireless LAN Model only) 5. CD testQ. Quit menu screen 2. When A: \DIAG appears, input "JDG_295, XEX" and press Enter. 3. The input screen shown below will appear. To choose menu items, hold down "ALT" and press the selection key. Example: "ALT" + F brings up the File menu. Input screen Order of test flow selection Inpu
Résumé du contenu de la page N° 17
5.5. Error Messages and Troubleshooting The table below explains the parts that may be faulty or damaged should an error message occur while performing the various test items of the self diagnostics program. Test classification Screen display test items Contents A20 GATE TEST Address 20 line 1 CPU CACHE ON/OFF Cache memory on/off 2 (CPU related) 3 NPU OPERAND TEST Floating point processor function 4 RAM (Memory related) RAM STANDARD Memory standard 5 CONTROL DMA PAGE REG TEST DMA page register 6
Résumé du contenu de la page N° 18
6 Wiring Connection Diagram SERIAL PORT PARALLEL PORT EXTERNAL DISPLAY PORT CN704 CN703 CN702 CN700 IO PCB INVERTER PCB CN1 CN2 BACK LIGHT MDC MODEM MODEM LCD J2 PORT J1 ANTENNA CN1 KEYBOARD PCB USB CN950 PORT (FRONT SIDE) MIC PORT-REPLICATOR CN952 USB HEADPHON (REVERSE SIDE) DC-IN PORT KBD PCB CN13 JK2 CN55 JK3 JK1 CN930 ANTENNA PCB CN933 CN10 CN15 CN9 CN6 MAINP PCB CN932 CN32 CN1 CN2 EXT ANT. PCB J5 J6 CN30 W-LAN MODULE J1 CN51 CN8 CN2 CN48 SD PCB CN56 CN1 CN4 CN800 CN801 CN803 CN12 CN47 TP
Résumé du contenu de la page N° 19
7 Disassembly/Reassembly Note: Power off the computer. Do not shut down to the Suspend or hibernation mode. Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result. 7.1. Disassembly Instructions 1. Open the Battery Cover. 7.1.1. Preparation 2. Remove the Battery Pack. Before disassembling, be sure to make the following prepara- 3. Open the HDD Cover. tions. 4. Remove the HDD Pack. Shut down Windows and turn off the power. 5. Open the FDD C
Résumé du contenu de la page N° 20
7.1.4. Removing the KB Cover, Hinge 7.1.5. Remove the KB Cable Cover, Cover L, Hinge Cover R and Key- Keyboard and PCMCIA Protector board KB Cable Cover Hinge Cover L PCMCIA KB Cover to Connector Protector (CN933) to Connector (CN932) Hinge Cover R Keyboard Keyboard Figure 3 1. Remove the four Screws, and remove the KB Cover. 2. Remove the four Screws and the four Screws, and remove Hinge Cover
