Résumé du contenu de la page N° 1
Dell Precision™ M60 Service Manual
Before You Begin
System Components
Memory Module, Mini PCI Card, Modem, and Modules
Hard Drive
Bluetooth™ Card
Fan
Docking Doors
Keyboard
Display Assembly
Video Card
Microprocessor Thermal-Cooling Assembly
Palm Rest
Microprocessor Module
Flashing the BIOS
Reserve Battery
System Board
Speakers
Base Latch
Pin Assignments for I/O Connectors
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps
Résumé du contenu de la page N° 2
Back to Contents Page Before You Begin Dell Precision™ M60 Service Manual Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification Preparing to Work Inside the Computer CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow applicable instructions in safety instructions in the System Information Gu
Résumé du contenu de la page N° 3
The procedures in this manual require the following tools: l #1 Phillips screwdriver l ¼-inch flat-blade screwdriver l Small plastic scribe l Flash BIOS update program floppy disk or CD Computer Orientation 1 back 2 right 3 front 4 left Screw Identification When you are removing and replacing components, photocopy "Screw Identification" as a tool to lay out and keep track of the screws. The placemat provides the number of screws and their sizes. Optio
Résumé du contenu de la page N° 4
Fan: Keyboard: Display Assembly: (2 each) (2 each) (2 each) Display Bezel: Display Panel: Display Latch: (display bumpers, 8 each) (9 each) (2 each) (8 each) Video Card Palm Rest: Speakers: (4 each) (2 each) (1 each) (13 each)
Résumé du contenu de la page N° 5
System Board: (3 each) (2 each) (1 each) Back to Contents Page
Résumé du contenu de la page N° 6
Back to Contents Page Flashing the BIOS Dell Precision™ M60 Service Manual 1. Ensure that the AC adapter is plugged in and that the main battery is installed properly. 2. Insert the flash BIOS update program floppy disk or CD and turn on the computer. Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the update is complete, the computer will automatically reboot. 3. Press during POST to enter the system setup p
Résumé du contenu de la page N° 7
Back to Contents Page Bluetooth™ Card Dell Precision™ M60 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. If you ordered a Bluetooth card with your computer, the card is already installed. 1. Remove the hard dr
Résumé du contenu de la page N° 8
Back to Contents Page Color Insert Cover Dell™ Latitude™ D800Dell™ Precision™ M60 Service Manual Removing the Color Insert Cover 1. Press down along the front of the display as shown. 2. Firmly grasp the lip of the cover to detach it from the computer, and pull the cover up. Replacing the Color Insert Cover 1. Place the tabs on the cover in the grooves above the display hinges, and lower the cover over the computer. 2. Press along the front until the cover
Résumé du contenu de la page N° 9
Back to Contents Page Microprocessor Module Dell Precision™ M60 Service Manual Removing the Microprocessor Module CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: Do not touch the processor die. Press and hold the mi
Résumé du contenu de la page N° 10
NOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in the ZIF socket does not require force. NOTICE: A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and ZIF socket. 1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket, and insert the microprocessor module. NO
Résumé du contenu de la page N° 11
Back to Contents Page Display Assembly Dell Precision™ M60 Service Manual Display Assembly Display Bezel Display Panel Display Assembly CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: You must remove the dis
Résumé du contenu de la page N° 12
1 display 2 display cable connector 3 computer base 4 pull-tab 5 connector 1 display bumpers (8) 4 display panel 2 M2.5 x 6-mm screws (8) 5 top cover 3 display bezel 6 M2 x 3-mm screws (9) Display Bezel CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
Résumé du contenu de la page N° 13
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the central control cover. 3. Remove the display assembly. 4. Remove the display bezel. 5. Remove the nine M2 x 3-mm screws
Résumé du contenu de la page N° 14
connector 3 pull-tab on bottom flex- cable connector 10. Remove the yellow tape from above the bottom flex-cable connector. Back to Contents Page
Résumé du contenu de la page N° 15
Back to Contents Page Docking Doors Dell Precision™ M60 Service Manual Removing the Docking Doors CAUTION: Before working inside your computer, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Gently
Résumé du contenu de la page N° 16
Back to Contents Page
Résumé du contenu de la page N° 17
Back to Contents Page Fan Dell Precision™ M60 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the two M2.5 x 12 screws from th
Résumé du contenu de la page N° 18
Back to Contents Page Hard Drive Dell Precision™ M60 Service Manual CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive. CAUTION: Before working inside your computer, read the safety instructions in your System Information Guide. NOTICE: To prevent data loss, shut down your computer before removing the hard drive. Do not remove the hard drive while the computer is on, in standby mode, or in hibernate m
Résumé du contenu de la page N° 19
Back to Contents Page Keyboard Dell Precision™ M60 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Turn the computer right-side up an
Résumé du contenu de la page N° 20
1 center control cover 2 system board connector 4. Remove the keyboard: a. Remove the two M2.5 x 6-mm screws across the top of the keyboard. NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. b. Rotate the keyboard up and slide it forward. c. Hold the keyboard up and slightly forward to allow access to the keyboard connector. d. Pull up on the keyboard connector tab t
