Résumé du contenu de la page N° 1
OPERATOR’S MANUAL
24 VOLT LITHIUM-ION
BATTERY CHARGER
140315001
(R85009)
BATTERIES SOLD
SEPARATELY
NEW BATTERY PACKS MUST BE
CHARGED BEFORE FIRST USE
Your charger has been engineered and manufactured to our high standards for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INSTRUCTIONS Keep cord and charger from heat to prevent damage WARNING! to housing or internal parts. READ AND UNDERSTAND ALL INSTRUCTIONS. Do not let gasoline, oils, petroleum-based products, Failure to follow all instructions listed below, may etc., come in contact with plastic parts. They contain result in electric shock, fire and/or serious personal chemicals that can damage, weaken, or destroy injury. plastic. Do not crush, drop or damage battery pack. Do not
Résumé du contenu de la page N° 3
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Wet Conditions Alert Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand operator’s manual Read The Operator’s Manual before using this product. Always wear safety goggles or safety glass
Résumé du contenu de la page N° 4
OPERATION CHARGE APPLICATIONS LEVEL INDICATOR You may use this tool for the following purpose: �Charging 24 Volt RIDGID lithium-ion batteries 24v XLi CAUTION: If at any point during the charging process none ? of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product. DO NOT insert another battery. Return the charger and battery to your nearest service center for service or replacement. CAUTION: Charge in a well ventilated area. Do not block charger ven
Résumé du contenu de la page N° 5
OPERATION LED FUNCTION OF CHARGER See Figure 3. LED BATTERY RED GREEN ACTION INDICATOR PACK LED LED Charging Fast charging OFF Charges in 1 hour ON Charger pre-charges battery until normal voltage is reached, then Charging Deeply Discharged ON OFF begins fast charge mode. May take longer than 1 hour to fully charge Maintenance Fast charging is complete Full OFF ON charging Charger maintains charge mode When battery pack reaches cooled Flashing OFF Evaluate Hot battery pack temperature,
Résumé du contenu de la page N° 6
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most When servicing use only identical RIDGID plastics are susceptible to damage from various types of replacement parts. Use of any other parts may commercial solvents and may be damaged by their use. Use create a hazard or cause product damage. clean cloths to remove dirt, dust, oil, grease, etc. WARNING: WARNING: Do not at any time let brake fluids, gasoline, Always wear safety goggles or safety
Résumé du contenu de la page N° 7
WARRANTY ® RIDGID HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY Proof of purchase must be presented when requesting WHAT IS NOT COVERED warranty service. This warranty applies only to the original purchaser at ® retail and may not be transferred. This warranty only covers Limited to RIDGID hand held and stationary power tools defects arising under normal usage and does not cover any purchased 2/1/04 and after. This product is manufactured malfunction, failure or def
Résumé du contenu de la page N° 8
OPERATOR’S MANUAL 24 VOLT LITHIUM-ION BATTERY CHARGER 140315001 (R85009) Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the bottom of the charger. Please record the serial numb
