Résumé du contenu de la page N° 1
P-2602R/RL-DxA
ADSL2+ VoIP IAD
Quick Start Guide
Version 3.40
5/2006
Edition 1
Résumé du contenu de la page N° 2
P-2602R/RL-DxA Quick Start Guide Overview The P-2602R/RL-DxA ADSL2+ VoIP Integrated Access Device (IAD) is an ADSL2+ router with phone ports for making calls over the Internet (Voice over IP or VoIP). It can also use regular phone services through regular (PSTN) phone lines. See the User’s Guide for more information on all features. The following figure shows how your P-2602R/RL-DxA (A) connects your network to the Internet, provides firewall protection and allows you to make telephone calls
Résumé du contenu de la page N° 3
P-2602R/RL-DxA Quick Start Guide 2.1 P-2602RL-DxA Hardware Connections 1DSL: Use the gray ADSL cable to connect the telephone jack or the DSL or MODEM jack on a splitter to this port. 2LINE: Use the green PSTN line cable to connect the telephone jack or the TEL or PHONE jack on a splitter to this port. Note: When the P-2602R/RL-DxA does not have power, only the phone connected to the PHONE 2 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency
Résumé du contenu de la page N° 4
P-2602R/RL-DxA Quick Start Guide 6 Push in the POWER button. Look at the lights on the front panel of the P-2602RL-DxA. •The POWER light blinks during start-up and is green once the P-2602RL-DxA is ready. • Each ETHERNET light turns on if the corresponding ETHERNET port is properly con- nected. The lights blink when the P-2602RL-DxA is sending or receiving data through the corresponding ETHERNET port. •The DSL light stays on if a physical connection with the ISP is established. The INTER- NET l
Résumé du contenu de la page N° 5
P-2602R/RL-DxA Quick Start Guide 2.2 P-2602R-DxA Hardware Connections 1DSL: Use the gray ADSL cable to connect the telephone jack or the DSL or MODEM jack on a splitter to this port. 2ETHERNET: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access. 3 PHONE 1-2: Use a telephone cable (and any telephone adaptors provided with your P-2602R-DxA) to connect your telephones to these ports. If you only have one telephone, you should use port 1. 4P
Résumé du contenu de la page N° 6
P-2602R/RL-DxA Quick Start Guide 5 Push in the POWER button. Look at the lights on the front panel of the P-2602R-DxA. •The POWER light blinks during start-up and is green once the P-2602R-DxA is ready. • Each ETHERNET light turns on if the corresponding ETHERNET port is properly con- nected. The lights blink when the P-2602R-DxA is sending or receiving data through the corresponding ETHERNET port. •The DSL light stays on if a physical connection with the ISP is established. The INTER- NET ligh
Résumé du contenu de la page N° 7
P-2602R/RL-DxA Quick Start Guide If http://www.zyxel.com opens correctly, your Internet access is ready. If the web page does not open, use the following steps. You should have information provided by your ISP. 1 Open your browser, and go to http://192.168.1.1. 2 Enter the password 1234. Then, click Login. If your browser cannot find this screen, make sure your browser is configured correctly. See Troubleshooting in the User’s Guide for details. 3 Type (and retype) a new password and click A
Résumé du contenu de la page N° 8
P-2602R/RL-DxA Quick Start Guide 4 Click Go to Wizard setup. Then, click Apply. 3.1 Internet Setup Note: You should have the information provided by your ISP. 1 Click INTERNET SETUP. Wait while the P-2602R/RL-DxA tries to detect your Internet connection. If the P-2602R/RL-DxA cannot detect your Internet connection, follow the directions in the screens. Enter the information provided by your ISP. Keep the default settings if your Internet service provider did not provide some information. W
Résumé du contenu de la page N° 9
P-2602R/RL-DxA Quick Start Guide 2 Confirm that your Internet setup settings are correct and click Return to Wizard Main Page to continue with VoIP setup. 3.2 VoIP Setup Note: You should have the information provided by your VoIP service provider. Click VOICE OVER INTERNET SETUP. Enter the information provided by your VoIP service provider. Keep the default settings if your VoIP service provider did not provide some information. If you have a SIP account like 1234567@VoIP- provider.com, the
Résumé du contenu de la page N° 10
P-2602R/RL-DxA Quick Start Guide Note: When the ZyXEL Device does not have power, only the phone connected to the PHONE 2 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls. In the main screen, click VoIP > PSTN Line. PSTN Line Pre-fix Number: Enter 1 - 7 numbers you dial before you dial the phone number, if you want to make a regular phone call while one of your SIP accounts is registered. These numbers tell
Résumé du contenu de la page N° 11
P-2602R/RL-DxA Quick Start Guide • If you want to dial a SIP number that uses letters or if you want to make a peer-to-peer call, set up a speed-dial entry first. See the User’s Guide for instructions. Then, dial the speed-dial number to make the call. • If you want to call regular telephone numbers, use your VoIP service provider’s dialing plan. For the P-2602RL-DxA, follow these directions to make phone calls that do not use the Internet. • If you set up the phone number in the Relay to PSTN
